The 'regexp' parameter matches last occurrence of a line starting with 'proxy=' and replaces it with the one defined in 'line' parameter. If no match - it works same way as before. This fixes resuming cluster deployments failed after that task (if there was no more than one line starting with 'proxy' in the yum.conf file - this condition should also be reassured with the change introduced here) eg. if they were initiated with Terraform.
refs #5277
As the issue describes, when no external or local load-balanced is used,
kube-proxy won't be able to contact apiserver at 127.0.0.1. So the
config map should be left as is.
* Upgrade etcd to 3.3.18
* Try with etcd 3.3.15 (kubeadm 1.16.7 default)
* Back to square one
* Try with 3.3.11
* Upgrade etcd to 3.3.18 (take 2)
* Try with 3.3.12
* download file
* download containers
* fix push image to nodes
* pull if none image on host
* fix
* improve docker image tag checks.
do not pull already cached images
* rebase fix merge conflict
* add support download_run_once when upgrade and scale cluster
add some test with download_run_once
* set default values to temp flag for every download cycle
* add save,load abilty for containerd and crio when download_run_once=true
* return redefine image save/load command to set_docker_image_facts.yml
* move set command to set_container_facts
* ctr in containerd_bin_dir
* fix order of ctr image export arguments
* temporary disable download_run_once for containerd and crio
due https://github.com/containerd/containerd/issues/4075
* remove unused files
* fix strict yaml linter warning and errors
* refactor logical conditions to pull and cache container images
* remove comment due lint check
* document role
* remove image_load_on_localhost, because cached images are always loaded to docker on remote sites
* remove XXX from debug output
* Run 'container-engine' after drain.
Move possibly disruptive role 'container-engine' to run after the node
is drained.
As that role have to be run on non-cluster nodes as well (etcd and
calico-rr), and those nodes are not drained, add play for that case.
* Check if api is up before upgrade.
If container engine is restarted in previous role, api controller can
take some time to start. This check ensures api is up before upgrade.
When kube-router is used as cni, rules might be added to the mangle table
to support external IPs. Therefore, mangle table should be flushed during
reset as well.
This 38688a4486 change replaces the
value for dockerproject_.+_repo_.+ docker variables but their new
value was previously defined in other variables. This change removes
the dockerproject_.+_repo_.+ docker variables in favor of the older
ones.
* Fix incorrect assertion comparison for kube_network_node_prefix
* Ignore assertion comparison for kube_network_node_prefix when using calico
* Adding more var docs description for kube_network_node_prefix
* Fixing trailing whitespaces
* External OpenStack Cloud Controller Manager implementation
* Adding controller image tag
* Minor fixes
* Restructuring the external cloud controller to work with KubeADM
* Added in code to allow control over pull policy for local path provisioner
* change to imagePullPolicy to use globally used variable k8s_image_pull_policy
* removed unusued variable from defaults
* updated contiv-etcd and cinder-csi-controllerplugin to use k8s_image_pull_policy variable
* Introduce kubelet_config_extra_args and kubelet_node_config_extra_args to pass params to kubelet via YAML config
* kubelet_config_extra_args is not the alternative
* Fix recover-control-plane to work with etcd 3.3.x and add CI
* Set default values for testcase
* Add actual test jobs
* Attempt to satisty gitlab ci linter
* Fix ansible targets
* Set etcd_member_name as stated in the docs...
* Recovering from 0 masters is not supported yet
* Add other master to broken_kube-master group as well
* Increase number of retries to see if etcd needs more time to heal
* Make number of retries for ETCD loops configurable, increase it for recovery CI and document it
* containerd: add proxy support
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* kubespray-defaults: add kube_service_addresses / kube_pods_subnet to no_proxy
CIDR notation in no_proxy is supported by a lot of programs/languages,
including go: https://github.com/golang/go/issues/16704
Without that containerd cannot talk the the API server (kube_apiserver_ip),
but it should not go through an external proxy for the nodes/pods/services
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Change dockerproject.org to download.docker.com
dockerproject.org was deprecated in 2017 and has gone down.
* Restore yum repo for containerd
Change-Id: I883bb512a2164a85865b1bd4fb569af0358c8c2b
Co-authored-by: Craig Rodrigues <rodrigc@crodrigues.org>
When running with serial != 100%, like upgrade_cluster.yml, we need to apply this fixup each time
Problem was introduced in 05dc2b3a09
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
Raises limit from 100 to 300 because the default is far too low
and the pod can handle 300 with the given resources.
Change-Id: Ib1eec10da3d09d198933fcfe87291587e58d7cdb
I've tested this update by deploying a containerd / etcd cluster on top CentOS7,
MetalLB + NGINX Ingress. Upgrade using upgrade-cluster.yml
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
Resolves issue where kubectl cache of <v1.16 api schema
interferes with interacting with daemonsets and deployments.
Change-Id: I63b7046958f2008eb144b6da0004c598f945e0ae
* Fix crictl
* Reload systemd daemon before enabling service
* Typo
* Add crictl template
* Remove seccomp.json for ubuntu
* Set runtime path of runc for ubuntu
* Change path to conmon
There is no cri-tools package in CentOS/EPEL/Red Hat.
Additionally, cri-tools is provided into the installation via
roles/download/defaults/main.yml:104:crictl_download_url.
* Fix python3-libselinux installation for RHEL/CentOS 8
In bootstrap-centos.yml we haven't gathered the facts,
so #5127 couldn't work
Minimum ansible version to run kubespray is 2.7.8,
so ansible_distribution_major_version is defined an there is no need to default it
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Restart NetworkManager for RHEL/CentOS 8
network.service doesn't exist anymore
# systemctl status network
Unit network.service could not be found.
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Add module_hotfixes=True to docker / containerd yum repo config
https://bugzilla.redhat.com/show_bug.cgi?id=1734081https://bugzilla.redhat.com/show_bug.cgi?id=1756473
Without this setting you end up with the following error:
# yum install docker-ce
Failed to set locale, defaulting to C
Last metadata expiration check: 0:03:21 ago on Thu Sep 26 22:00:05 2019.
Error:
Problem: package docker-ce-3:19.03.2-3.el7.x86_64 requires containerd.io >= 1.2.2-3, but none of the providers can be installed
- cannot install the best candidate for the job
- package containerd.io-1.2.2-3.3.el7.x86_64 is excluded
- package containerd.io-1.2.2-3.el7.x86_64 is excluded
- package containerd.io-1.2.4-3.1.el7.x86_64 is excluded
- package containerd.io-1.2.5-3.1.el7.x86_64 is excluded
- package containerd.io-1.2.6-3.3.el7.x86_64 is excluded
(try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages)
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
Initially this was to fix a mis-indented approvers key. However, it turns
out that 'oilbeater' is not a member of kubernetes-sigs nor
kubernetes-incubator (the org this repo was migrated from). Thus this
OWNERS file is failing prow's validation check.
As a workaround I've opted to move them to emeritus_approver, which
isn't valiated and can be used as a hint for other approvers in this
repo
This fixes the scenario where masters are upgraded one at a time
and coredns gets improperly scaled back up to 2 replicas.
Change-Id: I7cc9283f40efcfd61b5813c89a5805c95d901567
Kubespray Pull Request #5084 (https://github.com/kubernetes-sigs/kubespray/pull/5084) caused more problems than it solved due to limitations with the synchronize module. See comments on Kubespray Issues #5059 (https://github.com/kubernetes-sigs/kubespray/issues/5059) and #5116 (https://github.com/kubernetes-sigs/kubespray/issues/5116). Details from Ansible documentation: "Currently, synchronize is limited to elevating permissions via passwordless sudo. This is because rsync itself is connecting to the remote machine and rsync doesn’t give us a way to pass sudo credentials in. ... Currently there are only a few connection types which support synchronize (ssh, paramiko, local, and docker) because a sync strategy has been determined for those connection types. Note that the connection for these must not need a password as rsync itself is making the connection and rsync does not provide us a way to pass a password to the connection. ..." Thus, reverting Pull Request #5084.
* Add support for Kubernetes 1.16.1
* Defaults to 1.16.1
* add 1.16.2 checksums and set new version as default
* correct 1.16.2 checksums and add 1.15.5 checksums
When using cluster.yml or scale.yml to add/scale nodes in the existing
k8s cluster, the `kubeadm init` wouldn't run. As a result, kube-proxy
wouldn't be created, and therefore the kube-proxy deletion task would
fail, e.g. in the case where kube-router is used and "kube_proxy_remove"
is set to true. As a workaround, add ignore_errors to the kube-proxy
deletion task.
The script is not usable unless you are in the '.vagrant/provisioners/ansible/inventory/artifacts' folder.
This update makes this usable from anywhere.
- do not run etcd role when etcd_kubeadm_enabled == true
- remove default value 'systemd' for cgroup driver in containerd role.
this value override autodetect in kubelet_cgroup_driver_detected from docker info
This allows to easily override the gcr, quay, and docker repos with the
mirror repos in countries like China, where the default accesses are
blocked or unstable.
mydict.keys() should be converted to list,
otherwise it causes errors in loop iteration.
Remove extra space after class name, which broke configmap.
Also allow set reclaimPolicy property.
Cleaned up deprecated APIs:
apps/v1beta1
apps/v1beta2
extensions/v1beta1 for ds,deploy,rs
Add workaround for deploying helm using incompatible
deployment manifest.
Change-Id: I78b36741348f47a999df3841ee63cf4e6f377830
* Use python3-libselinux on RHEL8/Centos8
* The fact ansible_facts.distribution_major_version is not present on older Ansible version.
Default it to 0 in when not present and use libselinux-python as package to get current
default behaviour.
Fix for Kubespray Issue #5059 (https://github.com/kubernetes-sigs/kubespray/issues/5059). There is a known issue with the 'fetch' module that will sometimes lead to it failing with a memory error. See ansible/ansible#11702 (https://github.com/ansible/ansible/issues/11702). I encountered this issue with the "Copy kubectl binary to ansible host" task in kubespray/roles/kubernetes/client/tasks/main.yml, and it caused my entire deployment to error out (see "Output of ansible run" above). Replacing 'fetch' with 'synchronize' fixes this issue.
Updated Openstack to terraform 0.12 (#5062)
* update openstack to terraform 0.12(.5)
* replace cluter.tf with cluster.tfvars
* update README.md to terraform 0.12
* update Openstack CI tests to use terraform 0.12
* specify terraform version in openstack README
* gitlab CI to copy cluster.tfvars in case of openstack provider
* The terraform/openstack dynamic inventory can read
tfstate v4 (generated by terraform 0.12) and convert them internally
ro v3 (as generated by terraform 0.11.x).
Additionally the script has been updated to Python 3.
* run 'task download_container | Copy image to ansible host cache' with synchronize on download_delegate host
* try to run task copy file to ansible host on all inventory, not only on first random host
Fixes situation when using manual mode because it
tries to download coredns v1.3.1 from the same
image repository where kubernetes images are
downloaded from.
Change-Id: Ibbec8a72c8162ce8befa74e2013a268737ea5f8a
* Refactor calico-rr to run in k8s cluster with taint
Change-Id: I75a3169ff5b36ce8302fc7ef1c32d3eb697b5afa
* add preinstall checks
* rework calico/rr role
Change-Id: I2f0a7e6cb77cf91ad4a615923680760d2e5d9ca8
* add empty calico-rr group
Change-Id: I006c0a60db9b72d02245bf8fdfabcf982144a5ad
* Enable nodes to run calicoctl
per-node tasks require waiting for calico-node to be applied
Change-Id: Ibe1076b7334a2da0332f2dd766fde0c3f172d1f2
* cleanup tasks that should run on master
Change-Id: I43a837879ef41596f14657ecd7f813899b6865ae
* Switch run_once calico logic to just run on first master
Change-Id: I6893711e354f63c5e1eaf6ac2e23d9a6347a555d
* Enable containerd to deploy vanilla containerd package
Fixes kubeadm references to CRI socket for containerd
Fixes download role cache feature to work with containerd
Change-Id: I2ab8f0031107e2f0d1a85c39b4beb66f08509a01
* use containerd for flannel-addons job
Change-Id: Ied375c7d65e64a625ffbd995ff16f2374067dee6
* add containerd vars
Change-Id: Ib9a8a04e501c481a86235413cbec63f3672baf91
* fixup vars
Change-Id: Ibea64e4b18405a578b52a13da100384582aa24c2
* more fixes
* fix rh repo
Change-Id: I00575a77cfb7b81d6095db5d918a52023c8f13ba
* Adjust helm host install for containerd
* Add calico 3.7.3 support
* add calico_datastore variable to policy controller role
* add missing clusterrole rules for calico policy controller
* disable calico kube controller when kdd mode is used for versions < 3.6
8080 is a pretty common port, using nodelocaldns_ip:8080 still
prevents node processes or hostNetwork=true processes to bind to *:8080
so switch to 9254 by default (prometheus port is 9253)
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Use K8s 1.15
* Use Kubernetes 1.15 and use kubeadm.k8s.io/v1beta2 for
InitConfiguration.
* bump to v1.15.0
* Remove k8s 1.13 checksums.
* Update README kubernetes version 1.15.0.
* Update metrics server 0.3.3 for k8s 1.15
* Remove less than k8s 1.14 related code
* Use kubeadm with --upload-certs instead of --experimental-upload-certs due to depricate
* Update dnsautoscaler 1.6.0
* Skip certificateKey if it's not defined
* Add kubeadm-conftolplane.v2beta2 for k8s 1.15 or later
* Support kubeadm control plane for k8s 1.15
* Update sonobuoy version 0.15.0 for k8s 1.15
* Add limited containerd support
Containerd support for Ubuntu + Calico
* Added CRI-O support for ubuntu
* containerd support.
* Reset containerd support.
* fix lint.
* implemented feedback
* Change task name cri xx instead of cri-o in reset task and timeout condition.
* set crictl to fixed version
* Use docker-ce's container.io package for containerd.
* Add check containerd is installable or not.
* Avoid stop docker when use containerd and optimize retry for reset.
* Add config.toml.
* Fixed containerd for kubelet.env.
* Merge PR #4629
* Remove unused ubuntu variable for containerd
* Polish code for containerd and cri-o
* Refactoring cri socket configuration.
* Configurable conmon.
* Remove unused crictl/runc download
* Now crictl and runc is downloaded by common crictl.yml.
* fixed yamllint error
* Fixed brokenfiles by conflict.
* Remove commented line in config.toml
* Remove readded v1.12.x version
* Fixed broken set_docker_image_facts
* Fix yamllint errors.
* Remove unused apt source
* Fix crictl could not be installed
* Add containerd config from skolekonov's PR #4601
* add macvlan cni to kubespray
* macvlan: lint yaml files and fix sample config file
* macvlan: add OWNERS file
* add macvlan to README
* macvlan : CI first shoot
* macvlan : CI add full masquerade
* delegate retrive pod cidr to master only
* macvlan: add config for CI
* macvlan: add netchecker deployment
kubernetes/master role defines this value as an empty string
when using a cloud provider, not undefined. The check was updated
accordingly.
Change-Id: I58dc31ef4fd568a717a6753eb89ca687933018ae
* Require minimum version of Kubernetes
* Remove checksums for kubernetes version 1.12
* Add kube_version to precheck output and add min required version to README
* Fix merge
* Fix defaults
* Fix typo in precheck
* File and container image downloads are now cached localy, so that repeated vagrant up/down runs do not trigger downloading of those files. This is especially useful on laptops with kubernetes runnig locally on vm's. The total size of the cache, after an ansible run, is currently around 800MB, so bandwidth (=time) savings can be quite significant.
* When download_run_once is false, the default is still not to cache, but setting download_force_cache will still enable caching.
* The local cache location can be set with download_cache_dir and defaults to /tmp/kubernetes_cache
* A local docker instance is no longer required to cache docker images; Images are cached to file. A local docker instance is still required, though, if you wish to download images on localhost.
* Fixed a FIXME, wher the argument was that delegate_to doesn't play nice with omit. That is a correct observation and the fix is to use default(inventory_host) instead of default(omit). See ansible/ansible#26009
* Removed "Register docker images info" task from download_container and set_docker_image_facts because it was faulty and unused.
* Removed redundant when:download.{container,enabled,run_once} conditions from {sync,download}_container.yml
* All features of commit d6fd0d2aca by Timoses <timosesu@gmail.com>, merged May 1st 2019, are included in this patch. Not all code was included verbatim, but each feature of that commit was checked to be working in this patch. One notable change: The actual downloading of the kubeadm images was moved to {download,sync)_container, to enable caching.
Note 1: I considered splitting this patch, but most changes that are not directly related to caching, are a pleasant by-product of implementing the caching code, so splitting would be impractical.
Note 2: I have my doubts about the usefulness of the upload, download and upgrade tags in the download role. Must they remain or can they be removed? If anybody knows, then please speak up.
* Make local volume provisioner dir mode a variable
I need to change this for Nagios monitoring. Others may
need to as well. Had to close previous commits, sorry for
the spam.
* Make local volume provisioner dir mode a variable
I need to change this for Nagios monitoring. Others may
need to as well. Had to close previous commits, sorry for
the spam.
Task "kube-roter | Set cni directory permissions"
sets ownership of /opt/cni/bin to "kube"
Task "kube-router | Copy cni plugins"
copies the binaries from the archive setting the ownership
back to "root"
Fix "kube-roter" typo
Signed-off-by: Alberto Murillo <albertomurillosilva@gmail.com>
* Add support for arm images for hyperkube, kubeadm and cni_binary
* Add dummy etcd checksum for arm
This commit adds dummy etcd checksum for arm to avoid "no attribute" error
during setup.
* Add etcd host assert check
* Add 1.13.4 checksums of kubeadm and hyperkube for arm
* Update checksums of kubeadm and hyperkube for arm
* Add dummy checksums for calicoctl_binary_checksums dict
* disable gather_facts because it causes tests to fail
* Remove architecture check for etcd, due to unable to run tests
* Added pod psp in Rancher Local Path Provisioner
Added pod security policy (psp) in Rancher Local Path Provisioner.
Signed-off-by: André R. de Miranda <andre@miranda.work>
* Apply psp for Rancher Local Path Provisioner only when local_path_provisioner_namespace is not kube-system and also reorganized the templates
Kubespray waits exit of every drain before run other one.
Running drain every after each other seems better than parallel, because we should check resources availability every time.
But, this way, we have one additional problem: possible restart pods on the nodes that are killed little bit later.
Fast cordon before heavy drain seems like an easy solution.
Error starting nginx because in requiredDropCapabilities is dropped all capabilities.
The nginx requires the following capabilities:
- CHOWN
- SETGID
- SETUID
Signed-off-by: André R. de Miranda <andre@miranda.work>
Without this, pulls are considered for all
hosts groups, even if not targetted by the downloads
`groups` list. Hence, a download/sync is triggered
even though the host does not require the image.
* Disable kube_api_anonymous_auth by default to secure the setup
* Disable metrics-server in addons. Health endpoint is slow and unstable
* Fix anonymous-auth missing in configuration
* Cleanup a bit
* Fix kube anon auth
* Download to delegate and sync files when download_run_once
* Fail on error after saving container image
* Do not set changed status when downloaded container was up to date
* Only sync containers when they are actually required
Previously, non-required images (pull_required=false as
image existed on target host) were synced to the target
hosts. This failed as the image was not downloaded to
the download_delegate and hence was not available for
syncing.
* Sync containers when only missing on some hosts
* Consider images with multiple repo tags
* Enable kubeadm images pull/syncing with download_delegate
* Use kubeadm images list to pull/sync
'kubeadm config images pull' is replaced by collecting the images
list with 'kubeadm config images list' and using the commonly
used method of pull/syncing the images.
* Ensure containers are downloaded and synced for all hosts
* Fix download/syncing when download_delegate is a kubernetes host
When docker_container_storage_setup is false,
docker service should not depend on docker-storage-setup service,
because it's not installed.
For example, when using overlay2 on recent RHEL 7/Centos 7 kernels,
you most likely don't need it.
* Fix nodeselectors for contiv and nginx-ingress
Change-Id: Ib3eb6bd87193c69a90ee944c9164a0b6792c79ba
* Set kube proxy mode to iptables for addons task
Change-Id: Iff71a71f672405c74b4708c71db15ddc4391a53a
add the support of the folling property in azure-credential-check.yml
- azure_loadbalancer_sku: Sku of Load Balancer and Public IP. Candidate values are: basic and standard.
- azure_exclude_master_from_standard_lb: excludes master nodes from standard load balancer.
- azure_disable_outbound_snat: disables the outbound SNAT for public load balancer rules
- useInstanceMetadata: Use instance metadata service where possible
- azure_primary_availability_set: (Optional) The name of the availability set that should be used as the load balancer backend
We don't need to support upgrades from 2 year old installs,
just from the last major version.
Also changed most retried tasks to 1s delay instead of longer.
* Add README to bootstrap-os role
* Rework bootstrap-os once more
* Document workarounds for bugs/deficiencies in Ansible modules
* Unify and document role variables
* Remove installation of additional packages and repositories
* Merge Ubuntu and Debian tasks
* Remove pipelining setting from default playbooks
* Fix OpenSUSE not running its required tasks
The docker service provided by the containers-basic bundle is masked
in ClearLinux distribution. This is causing errors in the following
steps. This commit ensures that the unit is not masked.
* Use K8s 1.14 and add kubeadm experimental control plane mode
This reverts commit d39c273d96.
* Cleanup kubeadm setup run on first master
* pin kubeadm_certificate_key in test
* Remove kubelet autolabel of kube-node, add symlink for pki dir
Change-Id: Id5e74dd667c60675dbfe4193b0bc9fb44380e1ca
The BINDIR variable defined on the runc's Makefile[1] defines
installation path is on $(PREFIX)/sbin which used for most of the
Linux distributions. This change fixes the absolute path used for
non-ClearLinux distributions (CentOS, Ubuntu).
[1] https://github.com/opencontainers/runc/blob/master/Makefile#L10
The Stateless ClearLinux feature[1] requires the creation of folders
in /etc folder. This change ensure the existence of the
/etc/bash_completion.d/ folder for ClearLinux Distribution.
[1] https://clearlinux.org/features/stateless
* Enable nodelocaldns by default
* Enable nodelocaldns by default
* nodelocaldns is now default
* Disable enable_nodelocaldns for the addons CI jobs
Disable enable_nodelocaldns for the addons CI jobs to make sure things still work without nodelocaldns
* Add ansible-lint as gitlab-ci step
* Fix jinja2 syntax in include_tasks that breaks ansible-lint
* Use a block scalar to get around gitlab quoting/escaping rules
* Run ansible-lint in verbose mode in CI
This will fix error: error converting YAML to JSON: yaml: line 36: mapping values are not allowed in this context
Signed-off-by: Abdulaziz AlMalki <almalki.a@gmail.com>
* Vagrantfile: Bump openSUSE to Leap 15.0
* roles: container-engine: Add 'containerd' package for openSUSE
The 'containerd' package contains the docker-containerd and
docker-containerd-shim binaries. We also need to ensure that the latest
version is installed since an older version may already be present (eg GCE
images)
* Remove docker log-opts for opensuse
* roles: bootstrap-os: Use lowercase 'o' for openSUSE
OpenSUSE is not a valid family name. The correct one is openSUSE
* roles: bootstrap-os: Update zypper cache before first installation
The zypper cache may be outdated so ensure that it's fully updated
before we try and install the bootstrap packages.
Both the `yum` and `apt` modules support a list as input, this allows us avoid the slower `with_items` approach, which can take a long time with a large count of cluster nodes.
Both kubedns and dnsmasq modes are long not maintained.
We should run dns_late steps at the end because sshd
makes DNS lookups during Ansible run and has 2s timeouts
for each failed lookup trying to connect to coredns before
it is ready.
values from inventory in roles/kubespray-defaults/defaults/main.yml
hardcoded values in roles/container-engine/defaults/main.yml
dns_servers set empty in roles/container-engine/defaults/main.yml and skydns_server not set in docker_dns_servers variables
also set default value for manual_dns_serve
another variables in roles/container-engine/defaults not need to set
* feat(external-provisioner/local-path-provisioner): adds support for local path provisioner
Helpful for local development but also in production workloads (once the
permission model is worked out) where you have redundancy built into the
software uses the PVCs (e.g. database cluster with synchronous
replication)
* feat(local-path-provisioner): adds debug flag, image tag group var
* fix(local-path-provisioner): moves image repo/tag to download role
* test(gce_centos7-flannel): enables local-path-provisioner in test case
* fix(addons): add image repo/tag to commented default values
* fix(local-path-provisioner): typo in jinja template for local path provisioner
* style(local-path-provisioner): debug flag condition re-formatted
* fix(local-path-provisioner): adds missing default value for debug flag
* fix(local-path-provisioner): syntax fix for debug if condition end
* fix(local-path-provisioner): jinja template syntax: if condition white space
This was already approved in #4106 but there are CI issues
with that PR due to references to kubernetes incubator.
After upgrading to Kubespray 2.8.1 with Kubeadm enabled Rook
Ceph volume provision failed due to the flexvolume plugin dir not
being correct. Adding the var fixed the issue
* Adding ability to maintain existing Encryption Secrets at Rest.
If secrets_encryption.yaml is present it will not be overriten with a new kube_encrypt_token.
This should allow for it to be set ahead of a playbook running or maintain it if cluster.yml is ran on the same cluster and the ansible host does not have access to the secrets.
* Setting existing kube_encrypt_token across all master nodes in case it was missing in one or more nodes.
This fixes an issue where the `nodename` in calico's cni config json can fall out of sync with the k8s node name used by the calico pod if `kube_override_hostname` is set
Currently, the task `container_download | download images for kubeadm config images` fetches etcd image even though it's not required (etcd is bootstrapped by kubespray, not kubeadm).
`kubeadm-images.yaml` is only a subset of `kubeadm-config.yaml`, therefore ``kubeadm config images pull` will try to get all this list (including etcd)
```
# kubeadm config images list --config /etc/kubernetes/kubeadm-images.yaml
k8s.gcr.io/kube-apiserver:v1.13.2
k8s.gcr.io/kube-controller-manager:v1.13.2
k8s.gcr.io/kube-scheduler:v1.13.2
k8s.gcr.io/kube-proxy:v1.13.2
k8s.gcr.io/pause:3.1
k8s.gcr.io/etcd:3.2.24
k8s.gcr.io/coredns:1.2.6
```
When using the `kubeadm-config.yaml` though, it doesn't list etcd image:
```
# kubeadm config images list --config /etc/kubernetes/kubeadm-config.yaml
k8s.gcr.io/kube-apiserver:v1.13.2
k8s.gcr.io/kube-controller-manager:v1.13.2
k8s.gcr.io/kube-scheduler:v1.13.2
k8s.gcr.io/kube-proxy:v1.13.2
k8s.gcr.io/pause:3.1
k8s.gcr.io/coredns:1.2.6
```
This change just adds the etcd endpoints in the `kubeadm-images.yaml` to give a hint to kubeadm it doesn't need etcd image for its boostrapping as etcd is "external".
I confess it is a ugly hack, a better way would be to use a single `kubeadm-config.yaml` for both tasks, but they are triggered by different roles (`kubeadm-images.yaml` is used by download, `kubeadm-config.yaml` by kubernetes/master) at different steps and I didn't want to refactor too many things to prevent breakage.
This is specially useful for offline installation where a whitelist of container images is mirrored on a local private container registry. `k8s.gcr.io/etcd` and `quay.io/coreos/etcd` are two different repositories hosting the same images but using *different tags*!
* coreos/etcd:v3.2.24
* k8s.gcr.io/etcd:3.2.24 (note the missing 'v' in the tag name)
Fix issue where `kubeadm join` could wait forever for joining.
Fix issue where `kubeadm join` were not reaching the user, making
impossible to find the cause of the failure.
New behaviour is to first attempt to join without bypassing the
verifications checks and to display them if needed.
If this fails it still attempts to join by ignoring the check in
order to make previous behavior.
A timeout of 60 seconds is allocated for a joining.
Related-bug: #3973
* bootstrap: rework role
* support being called from a non-root user
* run some commands in check mode
* unify spelling/task names
* bootstrap: fix wording of comments for check_mode: false
* bootstrap: remove setup-pipelining task
* OCI subnet AD 2 is not required for CCM >= 0.7.0
Reorganize OCI provider to generate configuration, rather than pull
Add pull secret option to OCI cloud provider
* Updated oci example to document new parameters
This PR ensures that the e2fsprogs and xfsprogs packages are
installed on all Kubernetes nodes and that the packages are
the latest versions. It also ensures that the nodes can
create XFS filesystems when necessary, since not all distros
install xfsprogs by default.
e2fsprogs - ext2/ext3/ext4 file system utilities
xfsprogs - Utilities for managing the XFS filesystem
* Calico: Ability to define the default IPPool CIDR (instead of kube_pods_subnet)
* Documentation for calico_pool_cidr (and calico_advertise_cluster_ips which has been forgotten...)
* Set cluster DNS correctly in case of nodelocal dns cache
* Pass in cluster_ip based on dns mode
* Disable nodelocaldns by default
* Fix syntax error
* Fix syntax issue
* Add nodelocadns ip to vars of node installation
* Change location of nodelocaldns_ip
* Try to remove newlines from jinja template
* Add debug for config file
* Move parameter logic outside of template
* Adapt templates after feedback
* Remove debugging
Addressing the discussion started in #4064, this PR moves kubeadm and
hyperkube binaries to /usr/local/bin before running them on the master
nodes.
It is to address the case where local_release_dir points to /tmp
(kubespray default) and /tmp is mounted with noexec mode, preventing
any binaries to be run in that partition.
In role "node", we still move kubeadm to bin_dir only on the worker
nodes.
I know this is a bit hack.
If you use cloud LB, you can use kubeadm's controlPlaneEndpoint to configure kube-proxy's server field.
But for nginx-proxy, it didn't start when kubeadm init.
Looks like `epel_enabled` was not configured for the epel install in `bootstrap-centos.yml`. Also, there were no conditionals that would trigger bootstrap for RHEL.
* Use external LB IP for external api endpoint
Use loadbalancer_apiserver.address instead of apiserver_loadbalancer_domain_name for kudadm init --apiserver-advertise-address argument
https://kubernetes.io/docs/reference/setup-tools/kubeadm/kubeadm-init/#options states apiserver-advertise-address needs to be a IPv4 or IPv6 address
* only use loadbalancer IP if it is defined
I found a potential use case where `writable` could be null and therfore
not treated like a boolean, so this adds an extra default statement to
avoid negating a non-boolean as boolean which would lead to undefined. refs #4020
Looks like the template is removing the trailing space between storage
class entries, and since CI only has one storage class we never hit this
issue. This change will prevent the yaml from printing on a single line
when multiple storage classes are defined.
In v1beta1 of `ClusterConfiguration` the extraVolumes `writable` field was changed to `readOnly` and its boolean value must be negated.
Also, the json field for `useHyperKubeImage` was incorrectly capitalized.
Right now we're consistently getting warnings about kubelet not found in
path during `kubeadm init`. We fixed this for `kubeadm join` in #3342, and this brings the change to init
as well.
- Fixed an issue where storage class host directories were looped
through excessive target hosts
- Fixes examples in the LVP `README.md` to use nested dicts instead of a
list of dicts
* Makes local volume provisioner more dynamic
* Correct variable name in local storage provisioner defaults
* Updates external-provisioner readme
* Updates variable naming to be more clear, more documentation, fixes sample inventory
* Variable refactor, untangled some jinja2 loops
* Corrects variable name
* No variable substitution in dict keys, replaced with anchor
* Fixes default storage_classes dict, inline docs
* Fixes spelling in inline docs
* Addresses comments in review
* Updates all the defaults
* Fix failing CI task
* Fixes external provisioner daemonset
* allows to override the bind addresses for controller-manager and scheduler
Useful for Prometheus metrics monitoring
* Add bind addr override support in kubeadm/v1beta1
Adds support for override of bind addresses for controller-manager
and scheduler in kubeadm/v1beta1
* Move location of bind address vars
* Remove double declaration of schedulerExtraArgs
The change implemented in #3908 remove line breaks for supplementary
addresses in kubeadm SANs, causing errors in the config file and
failure to bring cluster up. This commit reimplement line breaks in
between supplementary addresses.
- Creates and defaults an ansible variable for every configuration option in the `kubeproxy.config.k8s.io/v1alpha1` type spec
- Fixes vars that were orphaned by removing non-kubeadm
- Fixes previously harcoded kubeadm values
- Introduces a `main` directory for role default files per component (requires ansible 2.6.0+)
- Split out just `kube-proxy.yml` in this first effort
- Removes the kube-proxy server field patch task
We should continue to pull out other components from `main.yml` into their own defaults files as I did here for `defaults/main/kube-proxy.yml`. I hope for and will need others to join me in this refactoring across the project until each component config template has a matching role defaults file, with shared defaults in `kubespray-defaults` or `downloads`
The containerd service and socket files have been dropped from the
openSUSE docker package so we should not require them in the docker
service anymore. This makes the docker service file look similar to
the one shipped by the openSUSE package.
Signed-off-by: Markos Chandras <mchandras@suse.de>
* controlPlaneEndpoint set up through load balancer should be possible even in single master setups
Enable load balancer for single-master setups
Fixes an issue where single-master setups are not reachable using the usual admin.conf from outside the cluster.
controlPlaneEndpoint set up through load balancer should be possible even in single master setups
* add fix to other api versions
* remove obsolete check completely
* remove check, pass 2
* removes checks in client configuration
* delete 'and'
* Add support for running a nodelocal dns cache
After encountering dns issues in a cluster I was recently working on I
noticed Kubernetes 1.13 introduced support for running a nodelocal dns
cache.
I believe this can usefull for more people.
73b548db06https://github.com/kubernetes/enhancements/blob/master/keps/sig-network/0030-nodelocal-dns-cache.md
* Add requested changes
* Add additional requested changes + documentation
* Add requested changes after review
* Replace incorrect variable
Setting host_architecture to allow etcd upgrade working through: ansible-playbook -b -i inventory/sample/hosts.ini cluster.yml --tags=etcd (on other case host_architecture is missing)
* Upgrade kubernetes to v1.13.0
* Remove all precense of scheduler.alpha.kubernetes.io/critical-pod in templates
* Fix cert dir
* Use kubespray v2.8 as baseline for gitlab
* Remove non-kubeadm deployment
* More cleanup
* More cleanup
* More cleanup
* More cleanup
* Fix gitlab
* Try stop gce first before absent to make the delete process work
* More cleanup
* Fix bug with checking if kubeadm has already run
* Fix bug with checking if kubeadm has already run
* More fixes
* Fix test
* fix
* Fix gitlab checkout untill kubespray 2.8 is on quay
* Fixed
* Add upgrade path from non-kubeadm to kubeadm. Revert ssl path
* Readd secret checking
* Do gitlab checks from v2.7.0 test upgrade path to 2.8.0
* fix typo
* Fix CI jobs to kubeadm again. Fix broken hyperkube path
* Fix gitlab
* Fix rotate tokens
* More fixes
* More fixes
* Fix tokens
* Remove variables defined in download role. Fixes#3799
* Cleanup some more variables
* Fix bad templating
* Minor fix
* Add dashboard to download role. Fixes#3736
* Set configure-cloud-routes=false as default if no network plugin is used
As configure-cloud-routes default value is `true`, so it need to be set to `false` when not required to avoid error messages like:
"Couldn't reconcile node routes: error listing routes: unable to find route table for AWS cluster"
on, for example, AWS installations that don't use cloud native routing.
* Update kube-controller-manager.manifest.j2
remove extra spaces
Introduced variable node_taints which can be set in inventory for
specific hosts or in group_vars, which generates --register-with-taints
command line argument for kubelet.
Introduced variable `ingress_nginx_tolerations` to set custom
tolerations for Ingress nginx daemonset, to be able to schedule
ingress-nginx on dedicated nodes with taints.
* Update defaults to match k8s 1.12 suggestions
* Test if Netchecker works with node ip instead of localhost
* Update defaults to ipvs and coredns
* Update defaults for kube_apiserver_insecure_port
* Update main.yaml
When `ansible_user` is not root, using `-b` option.
And with `download_run_once` and `download_localhost` set `true`.
Ansible will executes `container_download | upload container images to nodes` task.
It uses rsync to upload images to `/tmp/release/container/`, but the
`container` directory owned by `root`.
Now the `kubespray-aws-inventory.py` script always set a node_labels key
to ansible_host.
When AWS instance did not set property labels, it would be an empty
string.
The TASK `Write kubelet config file (kubeadm or non-kubeadm)` will
failed with a msg:
`AnsibleUndefinedVariable: 'unicode object' has no attribute 'items'`.
* Support Metrics Server as addon (#3560).
* Update metrics server v0.3.1.
* Add metrics server test.
* Replace metrics server manifests with kubernetes/cluster/addons's.
* Modify metrics server manifests for kubespray.
* Follow PR#3558 node label node-role.kubernetes.io/master change
* Fix metrics server parameters base_metrics_server_... to metrics_server_...
* Fix too hard corded metrics_server_memory_per_node
* Add configurable insecure tls for metrics-apiservice
* Downloadable addon-resizer and extract parameter as variables
* Remove metrics server version from deployment name
* Metrics Server work when all masters has node role
* Download metrics-server and add-resizer container only on master
* ServiceAccount and ConfigMap is separated and fix application name
* Remove old metrics server clusterrole template
* Fix addon-resizer image specify
* Make InternalIP default for metrics_server_kubelet_preferred_address_types
Make InternalIP default because multiple preferrred address types does not work.
comparison that happens during `TASK [kubernetes-apps/ansible : Kubernetes Apps | Lay Down CoreDNS Template]` where the `dns-autoscaler` template is deployed causes coredns to fail deployment. The error is caused by the variable `dns_prevent_single_point_failure` where an integer is being compared with a string. The resulting error:
```bash
'>' not supported between instances of 'int' and 'str'
```
prevents successful deployment of CoreDNS.
The change makes the comparison happen between integers and allows CoreDNS to succeed.
* Enable AutoScaler for CoreDNS
* Only use one template for dns autoscaler
* Rename a few variables for replicas and minimum pods
* Rename a few variables for replicas and minimum pods
* Remove replicas to make autoscale work
* Cleanup kubedns-autoscaler as it has been renamed
add prometheus annotations to calico-node if
calico_felix_prometheusmetricsenabled is enabled.
This will allow a kubernetes_sd to automaticly find the pods and start
scraping.
* Fix Failure talking to yum: Cannot find a valid baseurl for repo: base/7/x86_64 if Install packages in CentOS using proxy
* Add proxy to /etc/yum.conf if http_proxy is defined
* Added changes to clean up orphan containers and reload docker & kubelet directories.
* Added new files for cleaning up orphans and docker & kubelet directories
* Added new lines at the end of these files
* removed the trailing whitespaces from main.yml and clean-up.yml
* Updated as per the review comments
* Updated as per the review comments
* Removed service_facts and package_facts because they are not supported in ansible 2.4.0
* Corrected yaml syntax errors
* Removed the use of json_query filter and utilized selectattr
* Removed trailing spaces
* Changed the default value of docker_clean_up to false
* Added Changes to only include cleanup-docker-orphans.sh
* Reverted back changes done inside handler.
* Removed trailing spaces and made default value of docker_orphan_clean_up as true
* Reverted the default value of docker_orphan_clean_up as false
* Made the docker clean up as drop in
* Made the docker clean up as drop in
* Reverted the value of boolean docker_orphan_clean_up to false
* Converted ExecStop to ExecSTartPost. Removed the live restore check from the orphan script
* Adds support for Multus (multiple interfaces) CNI plugin
Multus is a latin word for "Multi". As the name suggests, it acts as a
Multi plugin in Kubernetes and provides multiple network interface
support in a pod. Multus uses the concept of invoking delegates by
grouping multiple plugins into delegates and invoking them in the
sequential order of the CNI configuration file provided in json format.
* Change CNI version (0.1.0->0.3.1) of Contiv to be compatible with Multus
When using resolvconf_mode host_resolvconf, there is an early DNS
config stage where Kubernetes cluster DNS is not injected for host
DNS intially. Later, the cluster DNS is enabled, but we do not
need to run every task from the kubernetes/preinstall role.
kube-router v0.2.1 highlights from changelog:
- IPv6 WIP but pretty close to full working functionality
- fully support network policy semantics with addition of support for
ipblock and except
* warning on meta flush_handlers
* avoid rm
* avoid "Module remote_tmp /root/.ansible/tmp did not exist and was created with a mode of 0700, this may cause issues when running as another user. To avoid this, create the remote_tmp dir with the correct permissions manually" warning on subsequent tasks using blockinfile
* is match
* failed
* version_compare
* succeeded
* skipped
* success
* version_compare becomes version since ansible 2.5
* ansible minimal version updated in doc and spec
* last version_compare
* [jjo] add kube-router support
Fixescloudnativelabs/kube-router#147.
* add kube-router as another network_plugin choice
* support most used kube-router flags via
`kube_router_foo` vars as other plugins
* implement replacing kube-proxy (--run-service-proxy=true) via
`kube_proxy_mode: none`, verified in a _non kubeadm_enabled_
install, should also work for recent kubeadm releases via
`skipKubeProxyInstall: true` config
* [jjo] address PR#3339 review from @woopstar
* add busybox image used by kube-router to downloads
* fix busybox download groups key
* rework kubeadm_enabled + kube_router_run_service_proxy
- verify it working ok w/the kubeadm_enabled and
kube_router_run_service_proxy true or false
- introduce `kube_proxy_remove` fact, to decouple logic
from kube_proxy_mode (which affects kubeadm configmap
settings, thus no-good to ab-use it to 'none')
* improve kube-router.md re: kubeadm_enabled and kube_router_run_service_proxy
* address @woopstar latest review
* add inventory/sample/group_vars/k8s-cluster/k8s-net-kube-router.yml
* fix kube_router_run_service_proxy conditional for kube-proxy removal
* fix kube_proxy_remove fact (w/ |bool), add some needed kube-proxy tags on my and existing changes
* update kube-router tolerations for 1.12 compatibility
* add PriorityClass to kube-router DaemonSet
The hosts(5) manpage clearly states that the first entry is the
"canonical name", or FQDN (Fully-Qualified Domain Name):
IP_address canonical_hostname [aliases...]
By using the alias as a first entry, `hostname -f` does not return the
correct domain which breaks all sorts of unrelated functionality (it
has impact over email server configuration, for example).
* [jjo] add DIND support to contrib/
- add contrib/dind with ansible playbook to
create "node" containers, and setup them to mimic
host nodes as much as possible (using Ubuntu images),
see contrib/dind/README.md
- nodes' /etc/hosts editing via `blockinfile` and
`lineinfile` need `unsafe_writes: yes` because /etc/hosts
are mounted by docker, and thus can't be handled atomically
(modify copy + rename)
* dind-host role: set node container hostname on creation
* add "Resulting deployment" section with some CLI outputs
* typo
* selectable node_distro: debian, ubuntu
* some fixes for node_distro: ubuntu
* cpu optimization: add early `pkill -STOP agetty`
* typo
* add centos dind support ;)
* add kubespray-dind.yaml, support fedora
- add kubespray-dind.yaml (former custom.yaml at README.md)
- rework README.md as per above
- use some YAML power to share distros' commonality
- add fedora support
* create unique /etc/machine-id and other updates
- create unique /etc/machine-id in each docker node,
used as seed for e.g. weave mac addresses
- with above, now netchecker 100% passes WoHooOO!
🎉🎉🎉
- updated README.md output from (1.12.1, verified
netcheck)
* minor typos
* fix centos node creation, needs earlier udevadm removal to avoid flaky facts, also verified netcheck Ok \o/
* add Q&D test-distros.sh, back to manual /etc/machine-id hack
* run-test-distros.sh cosmetics and minor fixes
* run-test-distros.sh: $rc fix and minor formatting changes
* run-test-distros.sh output cosmetics
* Added Priority class to tiller installation and also fixed tiller override implementation.
* Added changes to handle priority classes separately in tiller, instead of using the variable tiller_override
* Added changes to clean up orphan containers and reload docker & kubelet directories.
* Added new files for cleaning up orphans and docker & kubelet directories
* Added new lines at the end of these files
* removed the trailing whitespaces from main.yml and clean-up.yml
* Updated as per the review comments
* Updated as per the review comments
* Removed service_facts and package_facts because they are not supported in ansible 2.4.0
* Corrected yaml syntax errors
* Removed the use of json_query filter and utilized selectattr
* Removed trailing spaces
* Changed the default value of docker_clean_up to false
* Added Changes to only include cleanup-docker-orphans.sh
* Reverted back changes done inside handler.
* Removed trailing spaces and made default value of docker_orphan_clean_up as true
* Reverted the default value of docker_orphan_clean_up as false
* Made the docker clean up as drop in
* Made the docker clean up as drop in
* Reverted the value of boolean docker_orphan_clean_up to false
* #3475 - make dnsmasq to send queries to all servers in upstream. Make dnsmasq config file customizable.
* Code style fixes. Return current behaviour for dnsmasq strict-order flag.
* Fix DNS loop when resolvconf_mode is set to host_resolvconf
* Make sure upstream_dns_servers is defined when using resolvconf_mode == 'host_resolvconf'
* Only set upstream dns servers on KubeDNS and CoreDNS if they are defined
* Only set upstream dns servers on KubeDNS and CoreDNS if they are defined
- Local Volume StorageClass configuration is now manged by `local_volume_provisioner_storage_classes`, a list of maps that specifies local storage classes with `name` `host_dir` and `mount_dir` keys per entry
- Tasks and templates updated to loop through local volume storage classes
- Previous defaults for path/class names were not changed
- Fixed an issue where a `kubernetes/preinstall` was creating directories inconsistently with the `kubernetes-apps/external_provisioner/local_volume_provisioner` task
* Fix the jinja expression for openstack_tenant_id
OS_PROJECT_ID is obsolete in keystone v3 and jinja expression
doesn't set openstack_tenant_id as expected because of
undefined env var. Fixed the expression.
* Fix the dic iteration method in the kubelet template
Kubelet template rendering errors when additional Node lables are
added and using Python3. Update the method to be compatible to both
python2/3
Node lables doesn't work
According to the documentation, container images are described
by vars like `foo_image_repo` and `foo_image_tag`.
The variables netcheck_{agent,server}_{img_repo,tag} do not
follow that convention.
Before, Nodes tainted with NoExecute policy did not have calico/weave Pod.
Network pod should run on all nodes whatever happens on a specific node.
Also always set the Pods to be critical.
Also remove deprecated scheduler.alpha.kubernetes.io/tolerations annotations.
* Changes to assign pod priority to kube components.
* Removed the boolean flag pod_priority_assignment
* Created new priorityclass k8s-cluster-critical
* Created new priorityclass k8s-cluster-critical
* Fixed the trailing spaces
* Fixed the trailing spaces
* Added kube version check while creating Priority Class k8s-cluster-critical
* Moved k8s-cluster-critical.yml
* Moved k8s-cluster-critical.yml to kube_config_dir
When enable_network_policy is set to True with Calico 3 kubectl
apply fails with the error:
The Deployment "calico-kube-controllers" is invalid:
spec.strategy.rollingUpdate: Forbidden: may not be specified when
strategy type is 'Recreate'
See
https://github.com/kubernetes-incubator/kubespray/issues/3267
Changing the update strategy to RollingUpdate avoids this error.
OS_PROJECT_ID is obsolete in keystone v3 and jinja expression
doesn't set openstack_tenant_id as expected because of
undefined env var. Fixed the expression.
ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version
remove empty when line
ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version
force kubeadm upgrade due to failure without --force flag
ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version
added nodeSelector to have compatibility with hybrid cluster with win nodes, also fix for download with missing container type
fixes in syntax and LF for newline in files
fix on yamllint check
ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version
some cleanup for innecesary lines
remove conditions for nodeselector
* calico upgrade to v3
* update calico_rr version
* add missing file
* change contents of main.yml as it was left old version
* enable network policy by default
* remove unneeded task
* Fix kubelet calico settings
* fix when statement
* switch back to node-kubeconfig.yaml
Upgrade Kubernetes to V1.11.2
The kubeadm configuration file version has been upgraded from v1alpha1 to v1alpha2
Add bootstrap kubeadm-config.yaml with external etcd
The post-remove action fails during the kubectl delete node action because with rc: 2, command not found. The kubectl is not in the system PATH and the full path to the binary is required
* Update local-volume-provisioner-ds.yml.j2
After v1.10.2 default mountPropagation is "None"
* local_volume_provisioner version bump
v2.1.0 uses the beta nodeAffinity API by default which is available starting 1.10
* Update local-volume-provisioner-ds.yml.j2
MY_NAMESPACE env
* Update README.md
Raw block devices docs.
* kubedns & kubedns-autoscaler: Stick to master nodes.
- Tolerate only master nodes and not any NoSchedule taint
- Pods are on different nodes
- Pods are required to be on a master node.
* kubedns: use soft nodeAffinity.
Prefer to be on a master node, don't require.
* coredns: Stick to (different) master nodes.
- Pods are on different nodes
- Pods are preferred to be on a master node.
According to cluster/binary.yml vault binary will be placed to `{{ bin_dir }}` and according to `inventory/sample/group_vars/all.yml` that is
`inventory/sample/group_vars/all.yml`
ingress-nginx 0.16.2 (https://github.com/kubernetes/ingress-nginx/releases/tag/nginx-0.16.2)
This patch simplify ingress-nginx deployment by default deploy on
master, with customizable options; on the other hand, remove the
additional Ansible group "kube-ingress" and its k8s node label
injection.
Reference to https://kubernetes.io/docs/concepts/services-networking/ingress/#prerequisites:
GCE/Google Kubernetes Engine deploys an ingress controller on the master.
By changing `ingress_nginx_nodeselector` plus custom k8s node
label, user could customize the DaemonSet deployment target.
If `ingress_nginx_nodeselector` is empty, will deploy DaemonSet on
every k8s node.
- cephfs-provisioner 06fddbe2 (https://github.com/kubernetes-incubator/external-storage/tree/06fddbe2/ceph/cephfs)
Noteable changes from upstream:
- Added storage class parameters to specify a root path within the backing cephfs and, optionally, use deterministic directory and user names (https://github.com/kubernetes-incubator/external-storage/pull/696)
- Support capacity (https://github.com/kubernetes-incubator/external-storage/pull/770)
- Enable metrics server (https://github.com/kubernetes-incubator/external-storage/pull/797)
Other noteable changes:
- Clean up legacy manifests file naming
- Remove legacy manifests, namespace and storageclass before upgrade
- `cephfs_provisioner_monitors` simplified as string
- Default to new deterministic naming
- Add `reclaimPolicy` support in StorageClass
With legacy non-deterministic naming style (where $UUID are generated ramdonly):
- cephfs_provisioner_claim_root: /volumes/kubernetes
- cephfs_provisioner_deterministic_names: false
- Generated CephFS volume: /volumes/kubernetes/kubernetes-dynamic-pvc-$UUID
- Generated CephFS user: kubernetes-dynamic-user-$UUID
With new default deterministic naming style (where $NAMESPACE and $PVC are predictable):
- cephfs_provisioner_claim_root: /volumes
- cephfs_provisioner_deterministic_names: true
- Generated CephFS volume: /volumes/$NAMESPACE/$PVC
- Generated CephFS user: k8s.$NAMESPACE.$PVC
Red Hat has this theory that binaries in sbin are too dangerous to be on
the default path, but we need them anyway.
RH7 has /sbin and /usr/sbin as symlinks, so that is no longer important.
I'm adding it to the `PATH` instead of making the path to `modinfo`
absolute because I am worried about breaking support for other
distributions.
Currently all the gcr.io images used in kubespray can only run on x86.
Also gcr.io has not fully support multi-arch docker images.
Add extra var "image_arch" (default is amd64) to support running other
platforms, like arm64.
Change-Id: I8e1c9af533c021cb96ade291a1ce58773b40e271
On Aarch64, the default cgroup driver for docker is systemd
instead of cgroupfs. Should conform kubelet to use systemd
as cgroup driver as well to keep it consistent with docker.
Without this change, below exception will be raised.
/usr/bin/docker-current: Error response from daemon: shim
error: docker-runc not installed on system.
Change-Id: Id496ec9eaac6580e4da2f3ef1a386c9abc2a5129
The number of pods on a given node is determined by the --max-pods=k
directive. When the address space is exhausted, no more pods can be
scheduled even if from the --max-pods-perspective, the node still has
capacity.
The special case that a pod is scheduled and uses the node IP in the
host network namespace is too "soft" to derive a guarantee.
Comparing kubelet_max_pods with kube_network_node_prefix when given
allows to assert that pod limits match the CIDR address space.
* Move front-proxy-client certs back to kube mount
We want the same CA for all k8s certs
* Refactor vault to use a third party module
The module adds idempotency and reduces some of the repetitive
logic in the vault role
Requires ansible-modules-hashivault on ansible node and hvac
on the vault hosts themselves
Add upgrade test scenario
Remove bootstrap-os tags from tasks
* fix upgrade issues
* improve unseal logic
* specify ca and fix etcd check
* Fix initialization check
bump machine size
* sysctl file should be in defaults so that it can be overriden
* Change sysctl_file_path to be consistent with roles/kubernetes/preinstall/defaults/main.yml
pip was always being downloaded on subsequent runs, This PR always runs the pip command, and checks the rc of it before downloading pip
Fix in favor of #2582
Kubespray should not install any helm charts. This is a task
that a user should do on his/her own through ansible or another
tool. It opens the door to wrapping installation of any helm
chart.
