* [cilium] Separate templates for cilium, cilium-operator, and hubble installations
Signed-off-by: necatican <necaticanyildirim@gmail.com>
* [cilium] Update cilium-operator templates
Signed-off-by: necatican <necaticanyildirim@gmail.com>
* [cilium] Allow using custom args and mounting extra volumes for the Cilium Operator
Signed-off-by: necatican <necaticanyildirim@gmail.com>
* [cilium] Update the cilium configmap to filter out the deprecated variables, and add the new variables
Signed-off-by: necatican <necaticanyildirim@gmail.com>
* [cilium] Add an option to use Wireguard encryption on Cilium 1.10 and up
Signed-off-by: necatican <necaticanyildirim@gmail.com>
* [cilium] Update cilium-agent templates
Signed-off-by: necatican <necaticanyildirim@gmail.com>
* [cilium] Bump Cilium version to 1.11.3
Signed-off-by: necatican <necaticanyildirim@gmail.com>
* [calico] make vxlan encapsulation the default
* don't enable ipip encapsulation by default
* set calico_network_backend by default to vxlan
* update sample inventory and documentation
* [CI] pin default calico parameters for upgrade tests to ensure proper upgrade
* [CI] improve netchecker connectivity testing
* [CI] show logs for tests
* [calico] tweak task name
* [CI] Don't run the provisioner from vagrant since we run it in testcases_run.sh
* [CI] move kube-router tests to vagrant to avoid network connectivity issues during netchecker check
* service proxy mode still fails connectivity tests so keeping it manual mode
* [kube-router] account for containerd use-case
* [calico] upgrade 3.19.x to 3.19.4
* [calico] upgrade 3.20.x to 3.20.4
* [calico] upgrade 3.21.x to 3.21.4 and make it the default
* [calico] add 3.22.0 checksums
* [calico] account for path changes in calico 3.21.4 crd archive and above
This fixes the following types of failures:
- empty-string-compare
- literal-compare
- risky-file-permissions
- risky-shell-pipe
- var-spacing
In addition, this changes .gitlab-ci/lint.yml to block the same issue
by using the same method at Kubespray CI.
When running ansible-lint directly, we can see a lot of warning
message like
risky-file-permissions File permissions unset or incorrect
This fixes the warning messages.
* Improve control plane scale flow (#13)
* Added version 1.20.10 of K8s
* Setting first_kube_control_plane to a existing one
* Setting first_kube_control_plane to a existing one
* change first_kube_master for first_kube_control_plane
* Ansible-lint changes
kube-bench scan outputs warning related to Calico like:
* text: "Ensure that the Container Network Interface file
permissions are set to 644 or more restrictive (Manual)"
* text: "Ensure that the Container Network Interface file
ownership is set to root:root (Manual)"
This fixes these warnings.
When using Calico with:
- `calico_network_backend: vxlan`,
- `calico_ipip_mode: "Never"`,
- `calico_vxlan_mode: "Always"`,
the `FelixConfiguration` object has `ipipEnabled: true`, when it should be false:
This is caused by an error in the `| bool` conversion in the install task:
when `calico_ipip_mode` is `Never`,
`{{ calico_ipip_mode != 'Never' | bool }}` evaluates to `true`:
* Ansible: move to Ansible 3.4.0 which uses ansible-base 2.10.10
* Docs: add a note about ansible upgrade post 2.9.x
* CI: ensure ansible is removed before ansible 3.x is installed to avoid pip failures
* Ansible: use newer ansible-lint
* Fix ansible-lint 5.0.11 found issues
* syntax issues
* risky-file-permissions
* var-naming
* role-name
* molecule tests
* Mitogen: use 0.3.0rc1 which adds support for ansible 2.10+
* Pin ansible-base to 2.10.11 to get package fix on RHEL8
* Calico: align manifests with upstream
* allow enabling typha prometheus metrics
* Calico: enable eBPF support
* manage the kubernetes-services-endpoint configmap
* Calico: document the use of eBPF dataplane
* Calico: improve checks before deployment
* enforce disabling kube-proxy when using eBPF dataplane
* ensure calico_version is supported
* Calico: add v3.19.1 hashes
* enable liveness probe for calico-kube-controllers
3.19.1
* Calico: drop support for v3.16.x
* Calico: promote v3.18.3 as default
* add initial MetalLB docs
* metallb allow disabling the deployment of the metallb speaker
* calico>=3.18 allow using calico to advertise service loadbalancer IPs
* Document the use of MetalLB and Calico
* clean MetalLB docs
Since K8S 1.21, BoundServiceAccountTokenVolume feature gate is in beta stage, thus activated by default (anyone who follows CSI guidelines has enabled AllAlpha and faced the issue before 1.21).
With this feature, SA tokens are regenerated every hour.
As a consequence for Calico CNI, token in /etc/cni/net.d/calico-kubeconfig copied from /var/run/secrets/kubernetes.io/serviceaccount in install-cni initContainer expires after one hour and any pod creation fails due to unauthorization.
Calico pods need to be restarted so that /etc/cni/net.d/calico-kubeconfig is updated with the new SA token.
* rename ansible groups to use _ instead of -
k8s-cluster -> k8s_cluster
k8s-node -> k8s_node
calico-rr -> calico_rr
no-floating -> no_floating
Note: kube-node,k8s-cluster groups in upgrade CI
need clean-up after v2.16 is tagged
* ensure old groups are mapped to the new ones
* calico: drop support for version 3.15
* drop check for calico version >= 3.3, we are at 3.16 minimum now
* we moved to calico 3.16+ so we can default to /opt/cni/bin/install
* AlmaLinux: ansible>2.9.19 is needed to know about AlmaLinux
* AlmaLinux: identify as a centos derrivative
* AlmaLinux: add AlmaLinux to checks for CentOS
* Use ansible_os_family to compare family and not distribution
This PR is to move the cilium kvstore options to the configmap
rather than specifying them in the deployment as args. This
is not technically necessary but keeping all the options in
one place is probably not a bad idea.
Tested with cilium 1.9.5.
When attempting a fresh install without cilium_ipsec_enabled I ran
into the following error:
failed: [k8m01] (item={'name': 'cilium', 'file': 'cilium-secret.yml', 'type': 'secret', 'when': 'cilium_ipsec_enabled'}) =>
{"ansible_loop_var": "item", "changed": false, "item": {"file": "cilium-secret.yml", "name": "cilium", "type": "secret",
"when": "cilium_ipsec_enabled"},"msg": "AnsibleUndefinedVariable: 'cilium_ipsec_key' is undefined"}
Moving the when condition from the item level to the task level solved
the issue.
Starting with Cilium v1.9 the default ipam mode has changed to "Cluster
Scope". See:
https://docs.cilium.io/en/v1.9/concepts/networking/ipam/
With this ipam mode Cilium handles assigning subnets to nodes to use
for pod ip addresses. The default Kubespray deploy uses the Kube
Controller Manager for this (the --allocate-node-cidrs
kube-controller-manager flag is set). This makes the proper ipam mode
for kubespray using cilium v1.9+ "kubernetes".
Tested with Cilium 1.9.5.
This PR also mounts the cilium-config ConfigMap for this variable
to be read properly.
In the future we can probably remove the kvstore and kvstore-opt
Cilium Operator args since they can be in the ConfigMap. I will tackle
that after this merges.
When upgrading cilium from 1.8.8 to 1.9.5 I ran into the following
error:
level=error msg="Unable to update CRD" error="customresourcedefinitions.apiextensions.k8s.io
\"ciliumnodes.cilium.io\" is forbidden: User \"system:serviceaccount:kube-system:cilium-operator\"
cannot update resource \"customresourcedefinitions\" in API group \"apiextensions.k8s.io\" at the
cluster scope" name=CiliumNode/v2 subsys=k8s
The fix was to add the update verb to the clusterrole. I also added
create to match the clusterrole created by the cilium helm chart.
This replaces kube-master with kube_control_plane because of [1]:
The Kubernetes project is moving away from wording that is
considered offensive. A new working group WG Naming was created
to track this work, and the word "master" was declared as offensive.
A proposal was formalized for replacing the word "master" with
"control plane". This means it should be removed from source code,
documentation, and user-facing configuration from Kubernetes and
its sub-projects.
NOTE: The reason why this changes it to kube_control_plane not
kube-control-plane is for valid group names on ansible.
[1]: https://github.com/kubernetes/enhancements/blob/master/keps/sig-cluster-lifecycle/kubeadm/2067-rename-master-label-taint/README.md#motivation
* Download Calico KDD CRDs
* Replace kustomize with lineinfile and use ansible assemble module
* Replace find+lineinfile by sed in shell module to avoid nested loop
* add condition on sed
* use block for kdd tasks + remove supernumerary kdd manifest apply in start "Start Calico resources"
On CentOS 8 they seem to be ignored by default, but better be extra safe
This also make it easy to exclude other network plugin interfaces
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
By default Ansible stat module compute checksum, list extended attributes and find mime type
To find all stat invocations that really use one of those:
git grep -F stat. | grep -vE 'stat.(islnk|exists|lnk_source|writeable)'
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
