* Update hashes and set default version to 1.19.5
Signed-off-by: anthr76 <hello@anthonyrabbito.com>
* Reorder hashes
1.19.5 hashes should be near 1.19.x
* Added back blank line
* Allow the eventRecordQPS setting to be set.
The eventRecordQPS parameter controls rate limiting for event recording. When zero, unlimited events can cause denial-of-service situations. For my situation, I don't need more than a setting of "5". This change allows me to configure the setting before creating the cluster.
* Allow the eventRecordQPS setting to be set.
The default settings (see types.go) is five. So, this change does not affect the cluster provisioning. However, it does allow for the setting to be changed.
* Enable Kata Containers for CRI-O runtime
Kata Containers is an OCI runtime where containers are run inside
lightweight VMs. This runtime has been enabled for containerd runtime
thru the kata_containers_enabled variable. This change enables Kata
Containers to CRI-O container runtime.
Signed-off-by: Victor Morales <v.morales@samsung.com>
* Set appropiate conmon_cgroup when crio_cgroup_manager is 'cgroupfs'
* Set manage_ns_lifecycle=true when KataContainers is enabed
* Add preinstall check for katacontainers
Signed-off-by: Victor Morales <v.morales@samsung.com>
Co-authored-by: Pasquale Toscano <pasqualetoscano90@gmail.com>
* calico: add constant calico_min_version_required
and verify current deployed version against it.
* calico: remove upgrade support with data migration
The tool was used pre v3.0.0 and is no longer needed.
* calico: remove old version support from tasks
* calico: remove old ver support from policy ctrl
* calico: remove old ver support from node
* canal: remove old ver support
* remove unused calicoctl download checksums
calico_min_version_required is the oldest version that can be installed
Older versions can be removed.
* Add comment from roles/kubespray-defaults/defaults/main.yaml clarifying network allocation and sizes
Signed-off-by: Mikael Johansson <mik.json@gmail.com>
* Rewrite of the comment and added new examples
Signed-off-by: Mikael Johansson <mik.json@gmail.com>
* Update the cilium svc proxy test to HA mode
Signed-off-by: Arthur Outhenin-Chalandre <arthur@cri.epita.fr>
* Fix cilium strict kube-proxy in HA
Signed-off-by: Arthur Outhenin-Chalandre <arthur@cri.epita.fr>
* Add a single global endpoint variable
Signed-off-by: Arthur Outhenin-Chalandre <arthur@cri.epita.fr>
* Add cilium docs about kube-proxy replacement
Signed-off-by: Arthur Outhenin-Chalandre <arthur@cri.epita.fr>
* Fix issues in docs
Signed-off-by: Arthur Outhenin-Chalandre <arthur@cri.epita.fr>
This changes MetalLB contrib to one of addons for deploying MetalLB with
Kubernetes cluster deployment. By the default, Kubespray doesn't deploy
MetalLB addon.
Support for Ambassador OSS as an Ingress Controller when
settings `ingress_ambassador_enabled: true`.
Signed-off-by: Alvaro Saurin <alvaro.saurin@gmail.com>
* Install Kata Containers as additional container runtime
* Create RuntimeClasses for Kata Containers
* Updated Vagrant to optionally run without Docker as container manager
* Updated Vagrant to optionally use Libvirt nested virtualization
* Add Kata Containers documentation
* Fix lint errors
* Add kata_containers_enabled to kubespray-defaults
* Fixed typo error
* Fixed typo error
* Add additional network configuration options to external Openstack CCM (#6083)
* Change the default version of external openstack cloud controller image to v1.18.1 since there was an issue in v1.18.0 where some IPs of the private network were ignored
* Change Network section in external-openstack-cloud-config.j2 to Networking
* Add networking customization information in the openstack documentation
* assembly fallback_ips and no_proxy var only one time on localhost and populate result on all hosts
* add tag always, fix ansible lint errors
* workaround to mitogen issue dw/mitogen#663
* do not gather fact before install python on coreos like distros
* try to pass docker molecule test
* Fix chicken and egg problem with proxy_env not defined on the first envinronment usage.
* Disable fact gathering for the first proxy_env evaluation.
* Move proxy_env var set up from the role defaults to the root playbooks as fact.
The variable is defined in `kubernetes/preinstall` role and used in several roles. Since `kubernetes/preinstall` is not always included when `ansible-playbook` is run with tag selectors (see #5734 for reason), they will fail, or individual roles must copy the same fact definitions (as in #3846). Moving the definition to the always-included `kubespray-defaults` role will resolve the dependency problem.
* fedora coreos support
- bootstrap and new fact for
* fedora coreos support
- fix bootstrap condition
* fedora coreos support
- allow customize packages for fedora coreos bootstrap
* fedora coreos support
- prevent install ptyhon3 and epel via dnf for fedora coreos
* fedora coreos support
- handle all ostree like os in same way
* fedora coreos support
- handle all ostree like os in same way for crio
* fedora coreos support
- add fcos documentations
* download file
* download containers
* fix push image to nodes
* pull if none image on host
* fix
* improve docker image tag checks.
do not pull already cached images
* rebase fix merge conflict
* add support download_run_once when upgrade and scale cluster
add some test with download_run_once
* set default values to temp flag for every download cycle
* add save,load abilty for containerd and crio when download_run_once=true
* return redefine image save/load command to set_docker_image_facts.yml
* move set command to set_container_facts
* ctr in containerd_bin_dir
* fix order of ctr image export arguments
* temporary disable download_run_once for containerd and crio
due https://github.com/containerd/containerd/issues/4075
* remove unused files
* fix strict yaml linter warning and errors
* refactor logical conditions to pull and cache container images
* remove comment due lint check
* document role
* remove image_load_on_localhost, because cached images are always loaded to docker on remote sites
* remove XXX from debug output
* External OpenStack Cloud Controller Manager implementation
* Adding controller image tag
* Minor fixes
* Restructuring the external cloud controller to work with KubeADM
* containerd: add proxy support
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* kubespray-defaults: add kube_service_addresses / kube_pods_subnet to no_proxy
CIDR notation in no_proxy is supported by a lot of programs/languages,
including go: https://github.com/golang/go/issues/16704
Without that containerd cannot talk the the API server (kube_apiserver_ip),
but it should not go through an external proxy for the nodes/pods/services
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Add support for Kubernetes 1.16.1
* Defaults to 1.16.1
* add 1.16.2 checksums and set new version as default
* correct 1.16.2 checksums and add 1.15.5 checksums
8080 is a pretty common port, using nodelocaldns_ip:8080 still
prevents node processes or hostNetwork=true processes to bind to *:8080
so switch to 9254 by default (prometheus port is 9253)
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Use K8s 1.15
* Use Kubernetes 1.15 and use kubeadm.k8s.io/v1beta2 for
InitConfiguration.
* bump to v1.15.0
* Remove k8s 1.13 checksums.
* Update README kubernetes version 1.15.0.
* Update metrics server 0.3.3 for k8s 1.15
* Remove less than k8s 1.14 related code
* Use kubeadm with --upload-certs instead of --experimental-upload-certs due to depricate
* Update dnsautoscaler 1.6.0
* Skip certificateKey if it's not defined
* Add kubeadm-conftolplane.v2beta2 for k8s 1.15 or later
* Support kubeadm control plane for k8s 1.15
* Update sonobuoy version 0.15.0 for k8s 1.15
* Add limited containerd support
Containerd support for Ubuntu + Calico
* Added CRI-O support for ubuntu
* containerd support.
* Reset containerd support.
* fix lint.
* implemented feedback
* Change task name cri xx instead of cri-o in reset task and timeout condition.
* set crictl to fixed version
* Use docker-ce's container.io package for containerd.
* Add check containerd is installable or not.
* Avoid stop docker when use containerd and optimize retry for reset.
* Add config.toml.
* Fixed containerd for kubelet.env.
* Merge PR #4629
* Remove unused ubuntu variable for containerd
* Polish code for containerd and cri-o
* Refactoring cri socket configuration.
* Configurable conmon.
* Remove unused crictl/runc download
* Now crictl and runc is downloaded by common crictl.yml.
* fixed yamllint error
* Fixed brokenfiles by conflict.
* Remove commented line in config.toml
* Remove readded v1.12.x version
* Fixed broken set_docker_image_facts
* Fix yamllint errors.
* Remove unused apt source
* Fix crictl could not be installed
* Add containerd config from skolekonov's PR #4601
* Require minimum version of Kubernetes
* Remove checksums for kubernetes version 1.12
* Add kube_version to precheck output and add min required version to README
* Fix merge
* Fix defaults
* Fix typo in precheck
* Make local volume provisioner dir mode a variable
I need to change this for Nagios monitoring. Others may
need to as well. Had to close previous commits, sorry for
the spam.
* Make local volume provisioner dir mode a variable
I need to change this for Nagios monitoring. Others may
need to as well. Had to close previous commits, sorry for
the spam.
* Use K8s 1.14 and add kubeadm experimental control plane mode
This reverts commit d39c273d96.
* Cleanup kubeadm setup run on first master
* pin kubeadm_certificate_key in test
* Remove kubelet autolabel of kube-node, add symlink for pki dir
Change-Id: Id5e74dd667c60675dbfe4193b0bc9fb44380e1ca
* Enable nodelocaldns by default
* Enable nodelocaldns by default
* nodelocaldns is now default
* Disable enable_nodelocaldns for the addons CI jobs
Disable enable_nodelocaldns for the addons CI jobs to make sure things still work without nodelocaldns
* Vagrantfile: Bump openSUSE to Leap 15.0
* roles: container-engine: Add 'containerd' package for openSUSE
The 'containerd' package contains the docker-containerd and
docker-containerd-shim binaries. We also need to ensure that the latest
version is installed since an older version may already be present (eg GCE
images)
* Remove docker log-opts for opensuse
* roles: bootstrap-os: Use lowercase 'o' for openSUSE
OpenSUSE is not a valid family name. The correct one is openSUSE
* roles: bootstrap-os: Update zypper cache before first installation
The zypper cache may be outdated so ensure that it's fully updated
before we try and install the bootstrap packages.
Both kubedns and dnsmasq modes are long not maintained.
We should run dns_late steps at the end because sshd
makes DNS lookups during Ansible run and has 2s timeouts
for each failed lookup trying to connect to coredns before
it is ready.
values from inventory in roles/kubespray-defaults/defaults/main.yml
hardcoded values in roles/container-engine/defaults/main.yml
dns_servers set empty in roles/container-engine/defaults/main.yml and skydns_server not set in docker_dns_servers variables
also set default value for manual_dns_serve
another variables in roles/container-engine/defaults not need to set
* Set cluster DNS correctly in case of nodelocal dns cache
* Pass in cluster_ip based on dns mode
* Disable nodelocaldns by default
* Fix syntax error
* Fix syntax issue
* Add nodelocadns ip to vars of node installation
* Change location of nodelocaldns_ip
* Try to remove newlines from jinja template
* Add debug for config file
* Move parameter logic outside of template
* Adapt templates after feedback
* Remove debugging
Looks like `epel_enabled` was not configured for the epel install in `bootstrap-centos.yml`. Also, there were no conditionals that would trigger bootstrap for RHEL.
* Makes local volume provisioner more dynamic
* Correct variable name in local storage provisioner defaults
* Updates external-provisioner readme
* Updates variable naming to be more clear, more documentation, fixes sample inventory
* Variable refactor, untangled some jinja2 loops
* Corrects variable name
* No variable substitution in dict keys, replaced with anchor
* Fixes default storage_classes dict, inline docs
* Fixes spelling in inline docs
* Addresses comments in review
* Updates all the defaults
* Fix failing CI task
* Fixes external provisioner daemonset
- Creates and defaults an ansible variable for every configuration option in the `kubeproxy.config.k8s.io/v1alpha1` type spec
- Fixes vars that were orphaned by removing non-kubeadm
- Fixes previously harcoded kubeadm values
- Introduces a `main` directory for role default files per component (requires ansible 2.6.0+)
- Split out just `kube-proxy.yml` in this first effort
- Removes the kube-proxy server field patch task
We should continue to pull out other components from `main.yml` into their own defaults files as I did here for `defaults/main/kube-proxy.yml`. I hope for and will need others to join me in this refactoring across the project until each component config template has a matching role defaults file, with shared defaults in `kubespray-defaults` or `downloads`
* Add support for running a nodelocal dns cache
After encountering dns issues in a cluster I was recently working on I
noticed Kubernetes 1.13 introduced support for running a nodelocal dns
cache.
I believe this can usefull for more people.
73b548db06https://github.com/kubernetes/enhancements/blob/master/keps/sig-network/0030-nodelocal-dns-cache.md
* Add requested changes
* Add additional requested changes + documentation
* Add requested changes after review
* Replace incorrect variable
* Upgrade kubernetes to v1.13.0
* Remove all precense of scheduler.alpha.kubernetes.io/critical-pod in templates
* Fix cert dir
* Use kubespray v2.8 as baseline for gitlab
* Remove non-kubeadm deployment
* More cleanup
* More cleanup
* More cleanup
* More cleanup
* Fix gitlab
* Try stop gce first before absent to make the delete process work
* More cleanup
* Fix bug with checking if kubeadm has already run
* Fix bug with checking if kubeadm has already run
* More fixes
* Fix test
* fix
* Fix gitlab checkout untill kubespray 2.8 is on quay
* Fixed
* Add upgrade path from non-kubeadm to kubeadm. Revert ssl path
* Readd secret checking
* Do gitlab checks from v2.7.0 test upgrade path to 2.8.0
* fix typo
* Fix CI jobs to kubeadm again. Fix broken hyperkube path
* Fix gitlab
* Fix rotate tokens
* More fixes
* More fixes
* Fix tokens
* Update defaults to match k8s 1.12 suggestions
* Test if Netchecker works with node ip instead of localhost
* Update defaults to ipvs and coredns
* Update defaults for kube_apiserver_insecure_port
* Update main.yaml
* Support Metrics Server as addon (#3560).
* Update metrics server v0.3.1.
* Add metrics server test.
* Replace metrics server manifests with kubernetes/cluster/addons's.
* Modify metrics server manifests for kubespray.
* Follow PR#3558 node label node-role.kubernetes.io/master change
* Fix metrics server parameters base_metrics_server_... to metrics_server_...
* Fix too hard corded metrics_server_memory_per_node
* Add configurable insecure tls for metrics-apiservice
* Downloadable addon-resizer and extract parameter as variables
* Remove metrics server version from deployment name
* Metrics Server work when all masters has node role
* Download metrics-server and add-resizer container only on master
* ServiceAccount and ConfigMap is separated and fix application name
* Remove old metrics server clusterrole template
* Fix addon-resizer image specify
* Make InternalIP default for metrics_server_kubelet_preferred_address_types
Make InternalIP default because multiple preferrred address types does not work.
* Adds support for Multus (multiple interfaces) CNI plugin
Multus is a latin word for "Multi". As the name suggests, it acts as a
Multi plugin in Kubernetes and provides multiple network interface
support in a pod. Multus uses the concept of invoking delegates by
grouping multiple plugins into delegates and invoking them in the
sequential order of the CNI configuration file provided in json format.
* Change CNI version (0.1.0->0.3.1) of Contiv to be compatible with Multus
