* Add support for Kubernetes 1.16.1
* Defaults to 1.16.1
* add 1.16.2 checksums and set new version as default
* correct 1.16.2 checksums and add 1.15.5 checksums
Update README.md to link to the open issue that shows Ansible 2.8.x doesn't work with Kubespray. The requirements.txt file is already fixed to 2.7.8 so only the README needed updating, I think.
* Use K8s 1.15
* Use Kubernetes 1.15 and use kubeadm.k8s.io/v1beta2 for
InitConfiguration.
* bump to v1.15.0
* Remove k8s 1.13 checksums.
* Update README kubernetes version 1.15.0.
* Update metrics server 0.3.3 for k8s 1.15
* Remove less than k8s 1.14 related code
* Use kubeadm with --upload-certs instead of --experimental-upload-certs due to depricate
* Update dnsautoscaler 1.6.0
* Skip certificateKey if it's not defined
* Add kubeadm-conftolplane.v2beta2 for k8s 1.15 or later
* Support kubeadm control plane for k8s 1.15
* Update sonobuoy version 0.15.0 for k8s 1.15
* add macvlan cni to kubespray
* macvlan: lint yaml files and fix sample config file
* macvlan: add OWNERS file
* add macvlan to README
* macvlan : CI first shoot
* macvlan : CI add full masquerade
* delegate retrive pod cidr to master only
* macvlan: add config for CI
* macvlan: add netchecker deployment
* Require minimum version of Kubernetes
* Remove checksums for kubernetes version 1.12
* Add kube_version to precheck output and add min required version to README
* Fix merge
* Fix defaults
* Fix typo in precheck
Long option --become was used in the example but in the comment describing it the short option -b was used.
Use same option in description and example to avoid confusion.
* Use K8s 1.14 and add kubeadm experimental control plane mode
This reverts commit d39c273d96.
* Cleanup kubeadm setup run on first master
* pin kubeadm_certificate_key in test
* Remove kubelet autolabel of kube-node, add symlink for pki dir
Change-Id: Id5e74dd667c60675dbfe4193b0bc9fb44380e1ca
- Creates and defaults an ansible variable for every configuration option in the `kubeproxy.config.k8s.io/v1alpha1` type spec
- Fixes vars that were orphaned by removing non-kubeadm
- Fixes previously harcoded kubeadm values
- Introduces a `main` directory for role default files per component (requires ansible 2.6.0+)
- Split out just `kube-proxy.yml` in this first effort
- Removes the kube-proxy server field patch task
We should continue to pull out other components from `main.yml` into their own defaults files as I did here for `defaults/main/kube-proxy.yml`. I hope for and will need others to join me in this refactoring across the project until each component config template has a matching role defaults file, with shared defaults in `kubespray-defaults` or `downloads`
* Upgrade kubernetes to v1.13.0
* Remove all precense of scheduler.alpha.kubernetes.io/critical-pod in templates
* Fix cert dir
* Use kubespray v2.8 as baseline for gitlab
* Adds support for Multus (multiple interfaces) CNI plugin
Multus is a latin word for "Multi". As the name suggests, it acts as a
Multi plugin in Kubernetes and provides multiple network interface
support in a pod. Multus uses the concept of invoking delegates by
grouping multiple plugins into delegates and invoking them in the
sequential order of the CNI configuration file provided in json format.
* Change CNI version (0.1.0->0.3.1) of Contiv to be compatible with Multus
* failed
* version_compare
* succeeded
* skipped
* success
* version_compare becomes version since ansible 2.5
* ansible minimal version updated in doc and spec
* last version_compare
* [jjo] add kube-router support
Fixescloudnativelabs/kube-router#147.
* add kube-router as another network_plugin choice
* support most used kube-router flags via
`kube_router_foo` vars as other plugins
* implement replacing kube-proxy (--run-service-proxy=true) via
`kube_proxy_mode: none`, verified in a _non kubeadm_enabled_
install, should also work for recent kubeadm releases via
`skipKubeProxyInstall: true` config
* [jjo] address PR#3339 review from @woopstar
* add busybox image used by kube-router to downloads
* fix busybox download groups key
* rework kubeadm_enabled + kube_router_run_service_proxy
- verify it working ok w/the kubeadm_enabled and
kube_router_run_service_proxy true or false
- introduce `kube_proxy_remove` fact, to decouple logic
from kube_proxy_mode (which affects kubeadm configmap
settings, thus no-good to ab-use it to 'none')
* improve kube-router.md re: kubeadm_enabled and kube_router_run_service_proxy
* address @woopstar latest review
* add inventory/sample/group_vars/k8s-cluster/k8s-net-kube-router.yml
* fix kube_router_run_service_proxy conditional for kube-proxy removal
* fix kube_proxy_remove fact (w/ |bool), add some needed kube-proxy tags on my and existing changes
* update kube-router tolerations for 1.12 compatibility
* add PriorityClass to kube-router DaemonSet
Internet access is not mandatory as long as the user configures all container image repositories to point to internal container registries, in case of on-premises installation with firewall rules preventing direct Internet access.
* calico upgrade to v3
* update calico_rr version
* add missing file
* change contents of main.yml as it was left old version
* enable network policy by default
* remove unneeded task
* Fix kubelet calico settings
* fix when statement
* switch back to node-kubeconfig.yaml
Upgrade Kubernetes to V1.11.2
The kubeadm configuration file version has been upgraded from v1alpha1 to v1alpha2
Add bootstrap kubeadm-config.yaml with external etcd
ingress-nginx 0.16.2 (https://github.com/kubernetes/ingress-nginx/releases/tag/nginx-0.16.2)
This patch simplify ingress-nginx deployment by default deploy on
master, with customizable options; on the other hand, remove the
additional Ansible group "kube-ingress" and its k8s node label
injection.
Reference to https://kubernetes.io/docs/concepts/services-networking/ingress/#prerequisites:
GCE/Google Kubernetes Engine deploys an ingress controller on the master.
By changing `ingress_nginx_nodeselector` plus custom k8s node
label, user could customize the DaemonSet deployment target.
If `ingress_nginx_nodeselector` is empty, will deploy DaemonSet on
every k8s node.
- cephfs-provisioner 06fddbe2 (https://github.com/kubernetes-incubator/external-storage/tree/06fddbe2/ceph/cephfs)
Noteable changes from upstream:
- Added storage class parameters to specify a root path within the backing cephfs and, optionally, use deterministic directory and user names (https://github.com/kubernetes-incubator/external-storage/pull/696)
- Support capacity (https://github.com/kubernetes-incubator/external-storage/pull/770)
- Enable metrics server (https://github.com/kubernetes-incubator/external-storage/pull/797)
Other noteable changes:
- Clean up legacy manifests file naming
- Remove legacy manifests, namespace and storageclass before upgrade
- `cephfs_provisioner_monitors` simplified as string
- Default to new deterministic naming
- Add `reclaimPolicy` support in StorageClass
With legacy non-deterministic naming style (where $UUID are generated ramdonly):
- cephfs_provisioner_claim_root: /volumes/kubernetes
- cephfs_provisioner_deterministic_names: false
- Generated CephFS volume: /volumes/kubernetes/kubernetes-dynamic-pvc-$UUID
- Generated CephFS user: kubernetes-dynamic-user-$UUID
With new default deterministic naming style (where $NAMESPACE and $PVC are predictable):
- cephfs_provisioner_claim_root: /volumes
- cephfs_provisioner_deterministic_names: true
- Generated CephFS volume: /volumes/$NAMESPACE/$PVC
- Generated CephFS user: k8s.$NAMESPACE.$PVC
The README says to check if Python and pip are installed type:
```
python -v && pip -v
```
Lowercase `-v` is `--verbose`, uppercase `-V` is `--version`. The
command should be:
```
python -V && pip -V
```
