Commit graph

689 commits

Author SHA1 Message Date
Matthew Mosesohn
741de6051c Fix nodeselectors for contiv and nginx-ingress (#4662)
* Fix nodeselectors for contiv and nginx-ingress

Change-Id: Ib3eb6bd87193c69a90ee944c9164a0b6792c79ba

* Set kube proxy mode to iptables for addons task

Change-Id: Iff71a71f672405c74b4708c71db15ddc4391a53a
2019-04-28 23:36:19 -07:00
MarkusTeufelberger
88d919337e ansible-lint: don't compare to empty string [E602] (#4665) 2019-04-28 23:00:20 -07:00
grialeyur
82119ca923 Add support calico kubernetes datastore and typha. (#4498)
* Add support calico kubernetes datastore and typha.

* Add typha_enabled to kubespray-defaults.
2019-04-25 05:00:48 -07:00
Matthew Mosesohn
fc072300ea Purge legacy cleanup tasks from older than 1 year (#4450)
We don't need to support upgrades from 2 year old installs,
just from the last major version.

Also changed most retried tasks to 1s delay instead of longer.
2019-04-24 00:08:05 -07:00
MarkusTeufelberger
424e59805f ansible-lint: Fix commands that are also available as module (#4619) 2019-04-23 22:18:00 -07:00
Andreas Krüger
d588532c9b Update probe timeouts, delays etc. (#4612)
* Fix merge conflict

* Add check delay

* Add more liveness and readiness options to metrics-server
2019-04-23 14:46:02 -07:00
Matthew Mosesohn
05dc2b3a09 Use K8s 1.14 and add kubeadm experimental control plane mode (#4514)
* Use K8s 1.14 and add kubeadm experimental control plane mode

This reverts commit d39c273d96.

* Cleanup kubeadm setup run on first master

* pin kubeadm_certificate_key in test

* Remove kubelet autolabel of kube-node, add symlink for pki dir

Change-Id: Id5e74dd667c60675dbfe4193b0bc9fb44380e1ca
2019-04-19 06:01:54 -07:00
Andreas Krüger
656633f784 YAMLLint everything (#4576) 2019-04-18 23:59:54 -07:00
Maxime Guyot
a6dc50e7cb Add host information for canal readiness probe (#4548) 2019-04-17 10:22:02 -07:00
Maxime Guyot
ec3daedf9e Revert "Fix for unknown 'kubernetes.io' or 'k8s.io' labels specified with --node-labels (#4320)" (#4553)
This reverts commit 586ad89d50.
2019-04-17 07:58:06 -07:00
andreyshestakov
78f6f6b889 Mark "Calico | Set global as_num" as "unchanged" (#4539)
This command executes with "--skip-exists" parameter, so it is idempotent
and should not be marked as "changed".
2019-04-16 09:31:11 -07:00
Matthew Mosesohn
c5fb734098 Switch calicoctl from a container to a binary (#4524) 2019-04-15 04:24:04 -07:00
Matthew Mosesohn
d39c273d96 Revert "Use K8s 1.14 and add kubeadm experimental control plane mode (#4317)" (#4510)
This reverts commit 316508626d.
2019-04-11 12:52:43 -07:00
Matthew Mosesohn
316508626d Use K8s 1.14 and add kubeadm experimental control plane mode (#4317)
* Use Kubernetes 1.14 and experimental control plane support

* bump to v1.14.0
2019-04-11 05:30:13 -07:00
Andreas Krüger
5e0249ae7c Add HAProxy as internal loadbalancer (#4480) 2019-04-10 05:56:18 -07:00
Maxime Guyot
353afa7cb0 Fix ipip: false in calico v3 (#4473) 2019-04-10 05:50:15 -07:00
Neven Miculinic
a30ad1e5a5 Added generic CNI network plugin (#4322)
* Added generic CNI network plugin

* Added CNI network plugin documentation

* added necessary fix
2019-04-10 04:16:15 -07:00
Robert Neumann
586ad89d50 Fix for unknown 'kubernetes.io' or 'k8s.io' labels specified with --node-labels (#4320)
* Fix the file path for all.yml and k8s-cluster.yml

* Fix --node-labels namespace error "unknown labels specified"

* Update templates and configs kubelet node-labels
2019-04-10 04:14:12 -07:00
Maxime Guyot
b15f3e182d add default routing to canal and disable bird checks (#4468)
Co-Author: Paweł Skrzyński
2019-04-09 02:45:07 -07:00
Matthew Mosesohn
4fe2aa6bf7 Use install_cni init container for cni copy for calico/canal (#4416) 2019-04-02 03:32:36 -07:00
ml
483f1d2ca0 Calico felix - Fix jinja2 boolean condition (#4348)
* Fix jinja2 boolean condition

* Convert all felix variable to booleans instead.
2019-03-29 16:07:09 -07:00
chadswilson
d469282f1c add blockSize to IPPool spec for Calico >= v3.3.0 (#4224)
* add blockSize to IPPool spec for Calico >= v3.3.0

* fix "cidr" spec in Calico IPPool resource for my PR
2019-03-06 12:42:48 -08:00
Matthew Mosesohn
acbf3db233 Remove hard dependence on facts for all nodes (#4304)
* Remove hard dependence on facts for all nodes

* Update main.yaml

* Update main.yaml
2019-03-05 03:04:39 -08:00
Anupam Basak
9e8e069b23 remove kube bridge on reset (#4250) 2019-02-26 00:32:00 -08:00
hikoz
67832aada9 changed_when:false (#4189) 2019-02-25 20:09:30 -08:00
Wong Hoi Sing Edison
1c12c19150 weave: Upgrade to 2.5.1 (#4248)
Upstream Changes:

  - weave 2.5.1 (https://github.com/weaveworks/weave/releases/tag/v2.5.1)

Our Changes:

  - Sync templates with upstream changes
2019-02-25 20:02:00 -08:00
Chad Swenson
8872b2e0c6 Fix calico when kube_override_hostname is set (#4235)
This fixes an issue where the `nodename` in calico's cni config json can fall out of sync with the k8s node name used by the calico pod if `kube_override_hostname` is set
2019-02-13 16:02:48 -08:00
hikoz
9a91ef8628 change permission after unarchive (#4191) 2019-02-11 14:21:38 -08:00
Danny Kulchinsky
226d5ed7de [Calico] Define FELIX_KUBENODEPORTRANGES when kube-proxy in ipvs mode (#4173)
* Define FELIX_KUBENODEPORTRANGES when kube-proxy in ipvs mode

* ensure kube_apiserver_node_port_range is defined
2019-02-04 12:42:40 -08:00
Sorin Sbarnea
316b73178d Add timeout to Get current version of calico cluster version (#4149)
Avoid waiting forever for this task that should be very quick.

Fixes: #4148
2019-02-01 20:09:04 -08:00
Erwan Miran
f6d60a7e89 Calico: Ability to define the default IPPool CIDR (instead of kube_pods_subnet) (#4131)
* Calico: Ability to define the default IPPool CIDR (instead of kube_pods_subnet)

* Documentation for calico_pool_cidr (and calico_advertise_cluster_ips which has been forgotten...)
2019-01-31 13:39:13 -08:00
wangxf
a096761306 [PR-Calico]Support calico 3.4.0 (#4102)
* Suport calico 3.4.0

Signed-off-by: wangxf1987 <xiaofeix.wang@gmail.com>

* Remove symlink + cni conflist template when 3.3.0+, handle Canal, addition of install-cni: sidecar(3.3.0) or initontainer(3.4.0), KUBECONFIG_FILEPATH, calico_cert_dir, advertise cluster ips

* scheduler.alpha.kubernetes.io/critical-pod deprecated since 1.12
2019-01-28 11:03:49 -08:00
Erwan Miran
556a8d68bc Set IP env var to autodetect when calico_ip_auto_method is defined (#4105) 2019-01-27 23:09:18 -08:00
Douglas Hellinger
4479cc48fe Introduce calico_upgrade_url var for Calico upgrade tool.
So that binary can be sourced from anywhere - not only github.
2019-01-23 16:19:27 +08:00
Danny Kulchinsky
257019d424 Mount host's xtable lock and enable calico lokcing for <v3.2.1 2019-01-14 17:16:29 -05:00
ihard
30a9149b52 add vars for cilium init container (#3893)
* add vars for cilium init container

* make yamllint happy

* add var cilium_init in downloads
2018-12-18 00:34:19 -08:00
Zohar Mamedov
456596710e kube-router manifest DSR adjustments (#3828) 2018-12-10 00:40:39 -08:00
Andreas Krüger
d5ce5874e8 Streamline path to certs dir (#3836)
* Streamline path to certs dir

* More fixes

* Set path to etcd certs in kubernetes defaults instead
2018-12-06 23:11:53 -08:00
Rong Zhang
225f765b56 Upgrade kubernetes to v1.13.0 (#3810)
* Upgrade kubernetes to v1.13.0

* Remove all precense of scheduler.alpha.kubernetes.io/critical-pod in templates

* Fix cert dir

* Use kubespray v2.8 as baseline for gitlab
2018-12-06 12:11:48 -08:00
Erwan Miran
2c1dd69891 Reset tasks specific to Calico (#3813) 2018-12-04 11:37:45 -08:00
Rong Zhang
e0781483fa Use download binary instead of copying from the container (#3786) 2018-12-03 02:22:17 -08:00
Joost Cassee
f2635776cd Make Calico Felix log level configurable (#3781) 2018-11-28 00:55:01 -08:00
Erwan Miran
d33434647b Fix node selector for contiv etcd proxy (#3765) 2018-11-27 00:10:33 -08:00
Oleg Dolya
2aefa25448 fix args peer router ips and asns (#3644) 2018-11-19 00:34:05 -08:00
Johnny Halfmoon
53bde23a5e fixed ansible include/import inheritance issue (#3716) 2018-11-16 04:33:23 -08:00
Wong Hoi Sing Edison
9ebdf0e3cf weave: Upgrade to 2.5.0 (#3660)
* weave: Upgrade to 2.5.0

Upstream Changes:

-   weave 2.5.0 (https://github.com/weaveworks/weave/releases/tag/v2.5.0)
-   Adds support for Kubernetes `hostPort` mapping
-   Adds support for Kubernetes `ipBlock` NetworkPolicy feature

Our Changes:

-   Templates sync with upstream manifests
-   Remove legacy nodePort fix

* BC for weave < 2.5.0
2018-11-14 23:38:51 -08:00
Mark Eisenblätter
7deb842030 calico-node: add prometheus annotations (#3645)
add prometheus annotations to calico-node if
calico_felix_prometheusmetricsenabled is enabled.

This will allow a kubernetes_sd to automaticly find the pods and start
scraping.
2018-11-14 15:01:35 -08:00
Ryler Hockenbury
e8901a2422 Apply linux node selector to coreDNS deployment (#3688)
* Apply linux node selector to coreDNS deployment

* Remove comment before linux node selector on manifests

* mend
2018-11-13 04:54:15 -08:00
Egor
5c7eef70b4 Fix kube-router annotations: add conditions (#3670) 2018-11-09 08:15:27 -08:00
Louis Woods
bc9e14a762 Adds support for Multus (multiple interfaces) CNI plugin (#3166)
* Adds support for Multus (multiple interfaces) CNI plugin

Multus is a latin word for "Multi". As the name suggests, it acts as a
Multi plugin in Kubernetes and provides multiple network interface
support in a pod. Multus uses the concept of invoking delegates by
grouping multiple plugins into delegates and invoking them in the
sequential order of the CNI configuration file provided in json format.

* Change CNI version (0.1.0->0.3.1) of Contiv to be compatible with Multus
2018-11-04 01:07:38 -08:00
Robert Liotta
2a00c931e4 Added the missing environment for proxy for get_url (#3603)
* Added the missing environment for proxy for get_url

* Update upgrade.yml

* Fixed spaces

* Fixed spaces

* Update upgrade.yml
2018-11-01 06:20:57 -07:00
Erwan Miran
4f12ba00d1 Fix calico peering with router(s) (#3547) 2018-10-23 22:19:50 -07:00
Egor
ccc3f89060 Add kube-router annotations (#3533) 2018-10-21 00:35:52 -07:00
Matthew Mosesohn
127969d65f Align node-role value for kubeadm compatibility (#3558)
kubeadm sets node label node-role.kubernetes.io/master=''
and this is not configurable. We should use it everywhere.
2018-10-20 07:12:54 -07:00
Erwan Miran
87193fd270 Fix ansible syntax to avoid ansible warnings (one more) (#3536)
* warning on meta flush_handlers

* avoid rm

* avoid "Module remote_tmp /root/.ansible/tmp did not exist and was created with a mode of 0700, this may cause issues when running as another user. To avoid this, create the remote_tmp dir with the correct permissions manually" warning on subsequent tasks using blockinfile

* is match
2018-10-17 12:27:11 -07:00
Erwan Miran
4d2b6b71f2 Fix contiv api certificate generation (#3531) 2018-10-16 15:34:33 -07:00
Erwan Miran
7bec169d58 Fix ansible syntax to avoid ansible deprecation warnings (#3512)
* failed

* version_compare

* succeeded

* skipped

* success

* version_compare becomes version since ansible 2.5

* ansible minimal version updated in doc and spec

* last version_compare
2018-10-16 15:33:30 -07:00
Erwan Miran
bfd4ccbeaa Calico: Ability to define global peers (#3493) 2018-10-16 15:32:26 -07:00
JuanJo Ciarlante
a5edd0d709 [jjo] add kube-router support (#3339)
* [jjo] add kube-router support

Fixes cloudnativelabs/kube-router#147.

* add kube-router as another network_plugin choice
* support most used kube-router flags via
  `kube_router_foo` vars as other plugins
* implement replacing kube-proxy (--run-service-proxy=true) via
  `kube_proxy_mode: none`, verified in a _non kubeadm_enabled_
  install, should also work for recent kubeadm releases via
  `skipKubeProxyInstall: true` config

* [jjo] address PR#3339 review from @woopstar

* add busybox image used by kube-router to downloads

* fix busybox download groups key

* rework kubeadm_enabled + kube_router_run_service_proxy

- verify it working ok w/the kubeadm_enabled and
  kube_router_run_service_proxy true or false

- introduce `kube_proxy_remove` fact, to decouple logic
  from kube_proxy_mode (which affects kubeadm configmap
  settings, thus no-good to ab-use it to 'none')

* improve kube-router.md re: kubeadm_enabled and kube_router_run_service_proxy

* address @woopstar latest review

* add inventory/sample/group_vars/k8s-cluster/k8s-net-kube-router.yml

* fix kube_router_run_service_proxy conditional for kube-proxy removal

* fix kube_proxy_remove fact (w/ |bool), add some needed kube-proxy tags on my and existing changes

* update kube-router tolerations for 1.12 compatibility

* add PriorityClass to kube-router DaemonSet
2018-10-16 07:15:05 -07:00
Erwan Miran
6549b8f8ae Ability to define the asNumber on a per node basis when route reflectors are not used in order to peer directly with routers (#3492) 2018-10-15 23:44:49 -07:00
Anupam Basak
3ce933051a calico CALICO_IPV4POOL_IPIP overriding variable (#3507) 2018-10-12 00:09:36 -07:00
Erwan Miran
2ab2f3a0a3 Ability to define SSL certificates duration and SSL key size (#3482)
* Ability to specify ssl certificate duration and ssl key size - etcd/secrets

* Ability to specify ssl certificate duration and ssl key size - helm/contiv + fix contiv missing copy certs generation script
2018-10-09 04:43:30 -07:00
Luke Seelenbinder
3cfbc1a79a Add Pod IP to Flannel manifest. (#3379) 2018-10-01 00:06:13 -07:00
Cédric de Saint Martin
53d87e53c5 All CNIs: support ANY toleration. (#3391)
Before, Nodes tainted with NoExecute policy did not have calico/weave Pod.
Network pod should run on all nodes whatever happens on a specific node.

Also always set the Pods to be critical.
Also remove deprecated scheduler.alpha.kubernetes.io/tolerations annotations.
2018-09-27 05:28:54 -07:00
Erwan Miran
232020ef96 skip-exists is an flag for create command, not for calicoctl (#3401) 2018-09-27 04:57:02 -07:00
arzarif
6b71229d3f Resolve issues associated with Calico deployment in policy-only mode. (#3392) 2018-09-27 03:31:14 -07:00
Kuldip Madnani
36898a2c39 Adding pod priority for all the components. (#3361)
* Changes to assign pod priority to kube components.

* Removed the boolean flag pod_priority_assignment

* Created new priorityclass k8s-cluster-critical

* Created new priorityclass k8s-cluster-critical

* Fixed the trailing spaces

* Fixed the trailing spaces

* Added kube version check while creating Priority Class k8s-cluster-critical

* Moved k8s-cluster-critical.yml

* Moved k8s-cluster-critical.yml to kube_config_dir
2018-09-25 07:50:22 -07:00
Rui Cao
02de35cfc3 Fix some typos (#3382)
Signed-off-by: Rui Cao <ruicao@alauda.io>
2018-09-23 06:33:17 -07:00
Kevin Schuck
639010b3df Uses environment vars for etcd cert paths 2018-09-19 12:32:16 -05:00
Kevin Schuck
6f9f80acee Uses etcdv3 for calico 3 rr_v4 resources 2018-09-19 09:22:52 -05:00
k8s-ci-robot
b796226869
Merge pull request #3325 from firaxis/configurable_felix_healthhost
Make Felix healthhost configurable
2018-09-19 06:02:29 -07:00
Kevin Schuck
fb1678d425 Ensures BGPPeer resource names are unique 2018-09-18 10:48:30 -05:00
Alex Yakovenko
884053aaa7
Make Felix healthhost configurable 2018-09-18 15:48:29 +03:00
Kevin Schuck
d3adf09bde Fixes BGPPeer resource for calico >= 3.0.0 2018-09-17 15:22:28 -05:00
Erwan Miran
afa2a5f1c4 enhanced reset for contiv 2018-09-17 16:46:19 +02:00
Erwan Miran
bcaf2f9ea3 contiv 1.2.1 2018-09-17 16:45:05 +02:00
Wong Hoi Sing Edison
a544e54578 weave: Upgrade to 2.4.1
Upstream Changes:

-   weave 2.4.1 (https://github.com/weaveworks/weave/releases/tag/v2.4.1)

Our Changes:

-   Templates sync with upstream manifests
2018-09-17 17:09:19 +08:00
k8s-ci-robot
f1403493df
Merge pull request #3296 from rabi/fix_cilium_crio
Add volume and volumeMount for crio-socket
2018-09-15 03:23:02 -07:00
Matthew Mosesohn
c83350e597 refactor to base on calico_version 2018-09-13 18:05:10 +03:00
Matthew Mosesohn
55d76ea3d8
Update install.yml 2018-09-13 12:04:53 +03:00
rabi
1df0b67ec1 Add volume and volumeMount for crio-socket
This commit fixes #3295
2018-09-13 14:34:44 +05:30
Matthew Mosesohn
1091e82327
Update install.yml 2018-09-12 22:15:46 +03:00
Matthew Mosesohn
cc79125d3e
Update install.yml 2018-09-12 17:03:55 +03:00
Matthew Mosesohn
d91f9e14e6 Put back legacy support for calico ippools and bgp settings 2018-09-11 16:40:11 +03:00
mlushpenko
ea2c9d8f57 Fix yaml checks 2018-09-06 16:26:57 +02:00
mlushpenko
f958b32c83 Fix calico health checks 2018-09-06 15:57:21 +02:00
Matthew Mosesohn
dc3e317d20 Fix backward compatibility with calico 2.6 2018-09-06 15:54:20 +03:00
Luis Nunez
6569180654 remove capitalize filter 2018-09-04 14:56:53 +02:00
k8s-ci-robot
db11394711
Merge pull request #3200 from pablodav/feature/k8s_win_v1.11
Required support to start working on windows node support
2018-09-03 04:51:23 -07:00
Pablo Estigarribia
7cbe3c2171 ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version
ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version

remove empty when line

ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version

force kubeadm upgrade due to failure without --force flag

ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version

added nodeSelector to have compatibility with hybrid cluster with win nodes, also fix for download with missing container type

fixes in syntax and LF for newline in files

fix on yamllint check

ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version

some cleanup for innecesary lines

remove conditions for nodeselector
2018-09-02 12:47:06 -03:00
Antoine Legrand
2f1fe44762 update images to use arch 2018-08-31 13:45:08 +02:00
Fernando Crespo Grávalos
ac4ef719cc canal should mount xtables.lock to share the lock with other processes like kube-proxy 2018-08-29 13:08:51 +02:00
Aivars Sterns
23fd3461bc calico upgrade to v3 (#3086)
* calico upgrade to v3

* update calico_rr version

* add missing file

* change contents of main.yml as it was left old version

* enable network policy by default

* remove unneeded task

* Fix kubelet calico settings

* fix when statement

* switch back to node-kubeconfig.yaml
2018-08-23 17:17:18 +03:00
Erwan Miran
80cfeea957 psp, roles and rbs for PodSecurityPolicy when podsecuritypolicy_enabled is true 2018-08-22 18:16:13 +02:00
Wong Hoi Sing Edison
c3b3572025 Always create service account even rbac_enabled = false 2018-08-22 11:41:29 +08:00
Erwan Miran
7f16b46ed5 Reset tasks specific to a network_plugin moved inside its role directory + Reset tasks specific to cilium 2018-08-16 17:34:33 +02:00
Chad Swenson
001cae5894
Merge pull request #3028 from Kami-no/cilium
cilium v1.1.2
2018-08-09 10:35:29 -05:00
Zinin D.A
22b89edbbc cilium v1.1.2
Update all configs to current upstream state.
Add more resources (unable to pass tests now)...
2018-08-08 22:42:50 +03:00
Wong Hoi Sing Edison
538cb3b1bd weave: Upgrade to 2.4.0
Upstream Changes:

-   weave 2.4.0 (https://github.com/weaveworks/weave/releases/tag/v2.4.0)
-   Support `externalTrafficPolicy: Local` (https://github.com/weaveworks/weave/issues/2924)
-   Make the ipset list size bigger (https://github.com/weaveworks/weave/pull/3305)
-   Break out of kube rm-peers loop if nothing changes (https://github.com/weaveworks/weave/pull/3317)

Our Changes:

-   Revamp weave-net.yml.j2 with upstream changes
-   Add more variables for customization
-   Replace WEAVE_PASSWORD with k8s secret
-   Remove hard-corded seed mode support, in favor of variables customization
2018-08-07 18:34:51 +08:00
Aivars Sterns
72f053d9bb
Merge pull request #2972 from mattymo/force_cni_cp
Force copy cni files
2018-07-10 09:40:10 +03:00
Matthew Mosesohn
1a3b9dd864 Force copy cni files 2018-07-06 16:39:42 +03:00
elementyang
8fee1ab102 change create to apply 2018-07-06 19:36:19 +08:00
Aivars Sterns
73a2a18006
Merge pull request #2795 from gfkse/baremetal-override-calico-hostname
Make Calico nodename overridable on bare metal
2018-06-25 08:45:09 +03:00
Erwan Miran
11d87ecc37 removed surnumerary definition of contiv_etcd_init_image_* (already in download role) 2018-05-31 00:02:11 +02:00
Erwan Miran
2a4fc70e1c contiv-etcd-init image as default instead hardcoded 2018-05-28 11:11:18 +02:00
Daniel Mohr
476b14b06e Make Calico nodename overridable on bare metal
Signed-off-by: Daniel Mohr <daniel.mohr@supercrunch.io>
2018-05-14 14:13:51 +02:00
Matthew Mosesohn
02cd5418c2
Weave limits (#2660)
* Raise limits for weave

* Adjust weave limits
2018-04-15 18:32:49 +03:00
Wong Hoi Sing Edison
195d6d791a Integrate jetstack/cert-manager 0.2.3 to Kubespray 2018-03-31 19:29:11 +08:00
Matthew Mosesohn
03bcfa7ff5
Stop templating kube-system namespace and creating it (#2545)
Kubernetes makes this namespace automatically, so there is
no need for kubespray to manage it.
2018-03-30 14:29:13 +03:00
Wong Hoi Sing Edison
848fc323db Fixup for #2523:
- Rename template for /etc/cni/net.d/00-weave.conflist to 00-weave.conflist.j2
- Apply resources requests/limits to both container weave and weave-npc
2018-03-28 11:16:42 +08:00
Brad Beam
015ea62e92
Merge pull request #2262 from tmjd/calico-canal-v2-6-7
Update Calico and Canal
2018-03-27 21:07:28 -05:00
Andreas Krüger
f7dc73b830
Merge pull request #2521 from f84anton/patch-1
optional calico_ip_auto_method variable with IP_AUTODETECTION_METHOD
2018-03-24 18:37:03 +01:00
Wong Hoi Sing Edison
3f5c60886b Upgrade Weave to 2.2.1
- Fix #2414, so namespace isolation should now works
- Update weave-net.yml.j2 as per latest https://cloud.weave.works/k8s/net
- Other minor fixup
2018-03-24 17:27:12 +08:00
Anton Fayzrahmanov
a75598b3f4
IP_AUTODETECTION_METHOD docs 2018-03-24 01:54:17 +03:00
Anton Fayzrahmanov
60a057cace
Update calico-node.yml.j2 2018-03-24 01:46:26 +03:00
Anton Fayzrahmanov
dd9d0c0530
optional calico_ip_auto_method variable with IP_AUTODETECTION_METHOD
can be set to one of
first-found
can-reach 
interface
2018-03-23 16:33:20 +03:00
Erik Stidham
60bfc56e8e Update Calico and Canal
- Updating to use calico-node v2.6.7
- A few updates to their manifests too
2018-03-22 12:30:23 -05:00
Chad Swenson
bbb6e7b3da
Merge pull request #2508 from melkosoft/cilium
Cilium v.1.0.0-rc8
2018-03-21 20:25:43 -05:00
Chad Swenson
a6b918c1a1
Merge pull request #2485 from LuckySB/flannel_iface_regexp
Add --iface-regex options to flannel
2018-03-20 21:18:01 -05:00
melkosoft
ae30009fbc changed version to 1.0.0-rc8 2018-03-20 14:18:56 -07:00
melkosoft
158d775306 changed cilium to 1.0.0-rc7. Set CI to use coreos for cilium test 2018-03-20 12:43:26 -07:00
Sergey Bondarev
b7e6dd0dd4 Add --iface-regex options to flannel
Flannel use interface for inter-host communication setted on --iface options
Defaults to the interface for the default route on the machine.

flannel config set via daemonset, and flannel config on all nodes is the same.
But different nodes can have different interface names for the inter-host communication network

The option --iface-regex allows the flannel to find the interface on which the address is set from the inter-host communication network
2018-03-16 21:44:36 +03:00
Sergey Bondarev
f8fed0f308 change expirations period for generated certificate from 10 years to 100 years 2018-03-14 13:33:36 +03:00
rong.zhang
d264da8f08 Fix yamllint roles error for #2188 commit 2018-03-13 14:28:49 +08:00
Aivars Sterns
973cc12ca9
Merge pull request #2188 from cornelius-keller/fix_weave
fix nodePort for weave
2018-03-12 10:55:41 +02:00
Matthew Mosesohn
9837b7926f
Use proper lookup of etcd host for calico (#2408)
Fixes #2397
2018-03-02 15:36:52 +03:00
Brad Beam
afb6e7dfc3
Merge pull request #2362 from mattymo/calico_ignore_extra_pools_again
Use CNI to assign kube_pods_subnet for calico
2018-02-28 12:36:50 -06:00
Matthew Mosesohn
bc0fc5df98
Use node cert for etcd tasks instead of delegating to first etcd (#2386)
For etcdctl commands, use admin cert instead of node because this file
doesn't exist on etcd only hosts.
2018-02-27 22:23:51 +03:00
Brad Beam
89ade65ad6 Fixing etcd certs for calico rr (#2374) 2018-02-27 17:34:07 +03:00
Brad Beam
31659efe13 Fixing cert name in calico/canal for etcd check (#2358) 2018-02-22 17:37:07 +03:00
Andreas Krüger
d84ff06f73 Set filemode to 0640 (#2315)
* Set filemode to 0640

weave-net.yml file is readable by all users on the host. It however contains the weave_password to encrypt all pod communication. It should only be readable by root.

* Set mode 0640 on users_file with basic auth
2018-02-21 23:13:46 +03:00
Matthew Mosesohn
87f33a4644 Use CNI to assign kube_pods_subnet for calico
Now calico can be deployed if there are other existing pools
and not confuse IPAM and end up with pods in the wrong pools.
2018-02-21 20:32:28 +03:00
melkosoft
f13e76d022 Added cilium support (#2236)
* Added cilium support

* Fix typo in debian test config

* Remove empty lines

* Changed cilium version from <latest> to <v1.0.0-rc3>

* Add missing changes for cilium

* Add cilium to CI pipeline

* Fix wrong file name

* Check kernel version for cilium

* fixed ci error

* fixed cilium-ds.j2 template

* added waiting for cilium pods to run

* Fixed missing EOF

* Fixed trailing spaces

* Fixed trailing spaces

* Fixed trailing spaces

* Fixed too many blank lines

* Updated tolerations,annotations in cilium DS template

* Set cilium_version to iptables-1.9 to see if bug is fixed in CI

* Update cilium image tag to v1.0.0-rc4

* Update Cilium test case CI vars filenames

* Add optional prometheus flag, adjust initial readiness delay

* Update README.md with cilium info
2018-02-16 21:37:47 -06:00
Aivars Sterns
c70c44b07b
Merge pull request #2257 from rzenker/tb/baremetal-tweaks
baremetal tweaks
2018-02-08 15:48:55 +00:00
Wong Hoi Sing Edison
1a1d154e14 Support multiple inventory files under individual inventory directory 2018-02-08 08:08:15 +08:00
Brad Beam
7928cd20fb
Merge pull request #2037 from tiewei/contiv-etcd-split
Split contiv etcd and etcd-proxy into two daemonsets
2018-02-06 15:37:16 -06:00
Ryan Zenker
ad9049a49e baremetal tweaks
* allow installs to not have hostname overriden with fqdn from inventory
* calico-config no longer requires local as and will default to global
* when cloudprovider is not defined, use the inventory_hostname for cni-calico
* allow reset to not restart network (buggy nodes die with this cmd)
* default kube_override_hostname to inventory_hostname instead of ansible_hostname
2018-02-06 13:52:22 -05:00
Andreas Krüger
5cd6b0c753
Adding missing defaults for weave
The PR #2203 add's missing defaults for weave, but no signed CLA. So this PR fixes it.
2018-02-06 14:25:07 +01:00
woopstar
3289472e31 Added option to set MTU on Weave 2018-02-05 10:23:48 +01:00
Matthew Mosesohn
dc6a17e092
Use include/import tasks (#2192)
import_tasks will consume far less memory, so it should be
used whenever it is compatible.
2018-01-29 14:37:48 +03:00
Matthew Mosesohn
d2935ffed0
Optionally ignore the presence of extra calico pools (#2190) 2018-01-25 18:44:20 +03:00
Chad Swenson
c6e0fcea31
Merge pull request #1948 from sgmitchell/secured-etcd
Enable etcd secure client to prevent etcdctl access without cert and key
2018-01-25 09:35:51 -06:00
Chad Swenson
5d014d986b
Merge pull request #1992 from manics/flannel-hairpin
Enable flannel hairpin mode
2018-01-24 21:20:03 -06:00
Cornelius Keller
e22759d8f0 fix nodePort for weave 2018-01-24 10:31:51 +01:00
Steve Mitchell
e45b30d033 Add etcd key and cert environment variables for use with client auth 2018-01-02 13:52:17 -05:00
Wei Tie
3bb505d43f Remove unrequired mounts 2017-12-14 14:59:40 -08:00
Wei Tie
4e97225424 Add quote for etcd endpoints 2017-12-13 18:35:12 -08:00
Wei Tie
dad95c873b Remove templating for etcd members
Use a etcd-initer init container to generate etcd args, it determines
etcd name by comparing its ip and etcd cluster ips. This way will
make etcd configuration independent to the ansible templating so
that could be easier on adding master nodes.
2017-12-07 23:33:29 -08:00
Wei Tie
5881ba43f8 Split contiv etcd and etcd-proxy into two daemonsets
Putting contiv etcd and etcd-proxy into the same daemonset and manage
the difference by a env file is not good for scaling (adding nodes).
This commit split them into two daemonsets so that when adding nodes,
k8s could automatically starting a etcd-proxy on new nodes without need
to run related play that putting env file.
2017-12-06 22:21:50 -08:00
unclejack
e5d353d0a7 contiv network support (#1914)
* Add Contiv support

Contiv is a network plugin for Kubernetes and Docker. It supports
vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies,
multiple networks and bridging pods onto physical networks.

* Update contiv version to 1.1.4

Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config.

* Load openvswitch module to workaround on CentOS7.4

* Set contiv cni version to 0.1.0

Correct contiv CNI version to 0.1.0.

* Use kube_apiserver_endpoint for K8S_API_SERVER

Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks
to a available endpoint no matter if there's a loadbalancer or not.

* Make contiv use its own etcd

Before this commit, contiv is using a etcd proxy mode to k8s etcd,
this work fine when the etcd hosts are co-located with contiv etcd
proxy, however the k8s peering certs are only in etcd group, as a
result the etcd-proxy is not able to peering with the k8s etcd on
etcd group, plus the netplugin is always trying to find the etcd
endpoint on localhost, this will cause problem for all netplugins
not runnign on etcd group nodes.
This commit make contiv uses its own etcd, separate from k8s one.
on kube-master nodes (where net-master runs), it will run as leader
mode and on all rest nodes it will run as proxy mode.

* Use cp instead of rsync to copy cni binaries

Since rsync has been removed from hyperkube, this commit changes it
to use cp instead.

* Make contiv-etcd able to run on master nodes

* Add rbac_enabled flag for contiv pods

* Add contiv into CNI network plugin lists

* migrate contiv test to tests/files

Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>

* Add required rules for contiv netplugin

* Better handling json return of fwdMode

* Make contiv etcd port configurable

* Use default var instead of templating

* roles/download/defaults/main.yml: use contiv 1.1.7

Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 14:24:16 +00:00
Matthew Mosesohn
ec54b36e05
add retries for calico/canal etcd commands (#2007) 2017-11-28 16:39:55 +00:00
Simon Li
7be2521a31 Add flannel hairping mode 2017-11-21 10:43:50 +00:00
Spencer Smith
bc1a4e12ad fix broken variable in ansible 2.4.1.0 and ensure tasks for calico-rr (#1982) 2017-11-16 18:44:15 +00:00
Aivars Sterns
5e558c361b update weave-net to 2.0.5 version (#1877) 2017-11-13 16:11:47 +00:00
Hyunsun Moon
37125866ca Make calico_node_ignorelooserpf have an effect (#1945) 2017-11-13 09:35:13 +00:00
Chad Swenson
16ae2c1809 Flannel RBAC Fix
Fixes a bug that can occur if `cni-flannel-rbac.yml` was written but the playbook failed before it was applied. Uses the same approach as calico.
2017-11-02 23:20:23 -05:00
Matthew Mosesohn
86fb669fd3 Idempotency fixes (#1838) 2017-10-25 21:19:40 +01:00
Matthew Mosesohn
fc9a65be2b Refactor downloads to use download role directly (#1824)
* Refactor downloads to use download role directly

Also disable fact delegation so download delegate works acros OSes.

* clean up bools and ansible_os_family conditionals
2017-10-19 09:17:11 +01:00
Matthew Mosesohn
d4b10eb9f5 Fix path for calico get node names (#1816) 2017-10-17 10:54:48 +01:00
Kevin Lefevre
6ec45b10f1 Update network-plugins to use portmap plugin (#1763)
Portmap allow to use hostPort with CNI plugins. Should fix #1675
2017-10-16 07:11:38 +01:00
Matthew Mosesohn
10dd049912 Revert "Security fixes for etcd (#1778)" (#1786)
This reverts commit 4209f1cbfd.
2017-10-12 14:02:51 +01:00
Matthew Mosesohn
4209f1cbfd Security fixes for etcd (#1778)
* Security fixes for etcd

* Use certs when querying etcd
2017-10-12 13:32:54 +01:00
Brad Beam
b81c0d869c Adding calico/node env vars for prometheus configuration 2017-10-05 08:46:01 -05:00
Matthew Mosesohn
f14f04c5ea Upgrade to kubernetes v1.8.0 (#1730)
* Upgrade to kubernetes v1.8.0

hyperkube no longer contains rsync, so now use cp

* Enable node authorization mode

* change kube-proxy cert group name
2017-10-05 10:51:21 +01:00
Aivars Sterns
9c86da1403 Normalize tags in all places to prepare for tag fixing in future (#1739) 2017-10-05 08:43:04 +01:00
Matthew Mosesohn
a56738324a Move set_facts to kubespray-defaults defaults
These facts can be generated in defaults with a performance
boost.

Also cleaned up duplicate etcd var names.
2017-10-04 14:02:47 +01:00
Matthew Mosesohn
d94e3a81eb Use api lookup for kubelet hostname when using cloudprovider (#1686)
The value cannot be determined properly via local facts, so
checking k8s api is the most reliable way to look up what hostname
is used when using a cloudprovider.
2017-09-24 09:22:15 +01:00
Matthew Mosesohn
b294db5aed fix apply for netchecker upgrade (#1659)
* fix apply for netchecker upgrade and graceful upgrade

* Speed up daemonset upgrades. Make check wait for ds upgrades.
2017-09-15 13:19:37 +01:00
Matthew Mosesohn
6744726089 kubeadm support (#1631)
* kubeadm support

* move k8s master to a subtask
* disable k8s secrets when using kubeadm
* fix etcd cert serial var
* move simple auth users to master role
* make a kubeadm-specific env file for kubelet
* add non-ha CI job

* change ci boolean vars to json format

* fixup

* Update create-gce.yml

* Update create-gce.yml

* Update create-gce.yml
2017-09-13 19:00:51 +01:00
Brad Beam
69fac8ea58 Merge pull request #1634 from bradbeam/calico_cni
fix for calico cni plugin node name
2017-09-11 22:18:06 -05:00
Matthew Mosesohn
5d99fa0940 Purge old upgrade hooks and unused tasks (#1641) 2017-09-09 23:41:20 +03:00
Brad Beam
eeffbbb43c Updating calicocni.hostname to calicocni.nodename 2017-09-08 12:47:40 +00:00
Brad Beam
aaa0105f75 Flexing calicocni.hostname based on cloud provider 2017-09-08 12:47:40 +00:00
Chad Swenson
e26aec96b0 Consolidate kube-proxy module and sysctl loading (#1586)
This sets br_netfilter and net.bridge.bridge-nf-call-iptables sysctl from a single play before kube-proxy is first ran instead of from the flannel and weave network_plugin roles after kube-proxy is started
2017-09-06 15:11:51 +03:00
Matthew Mosesohn
660282e82f Make daemonsets upgradeable (#1606)
Canal will be covered by a separate PR
2017-09-04 11:30:01 +03:00
Matthew Mosesohn
77602dbb93 Move calico to daemonset (#1605)
* Drop legacy calico logic

* add calico as a daemonset
2017-09-04 11:29:51 +03:00
Matthew Mosesohn
a3e6896a43 Add RBAC support for canal (#1604)
Refactored how rbac_enabled is set
Added RBAC to ubuntu-canal-ha CI job
Added rbac for calico policy controller
2017-09-04 11:29:40 +03:00
Matthew Mosesohn
13d08af054 Fix upgrade for canal and apiserver cert
Fixes #1573
2017-08-29 22:08:30 +01:00
Chad Swenson
a39e78d42d Initial version of Flannel using CNI (#1486)
* Updates Controller Manager/Kubelet with Flannel's required configuration for CNI
* Removes old Flannel installation
* Install CNI enabled Flannel DaemonSet/ConfigMap/CNI bins and config (with portmap plugin) on host
* Uses RBAC if enabled
* Fixed an issue that could occur if br_netfilter is not a module and net.bridge.bridge-nf-call-iptables sysctl was not set
2017-08-25 10:07:50 +03:00
Brad Beam
71dca67ca2 Merge pull request #1508 from tmjd/update-calico-2-4-0
Update Calico to 2.4.1 release.
2017-08-24 14:57:29 -05:00
Yuki KIRII
a98b866a66 Verify if br_netfilter module exists (#1492) 2017-08-24 17:47:32 +03:00
Matthew Mosesohn
6bb3463e7c Enable scheduling of critical pods and network plugins on master
Added toleration to DNS, netchecker, fluentd, canal, and
calico policy.

Also small fixes to make yamllint pass.
2017-08-24 10:41:17 +01:00
Brad Beam
8b151d12b9 Adding yamllinter to ci steps (#1556)
* Adding yaml linter to ci check

* Minor linting fixes from yamllint

* Changing CI to install python pkgs from requirements.txt

- adding in a secondary requirements.txt for tests
- moving yamllint to tests requirements
2017-08-24 12:09:52 +03:00
Erik Stidham
9f9f70aade Update Calico to 2.4.1 release.
- Switched Calico images to be pulled from quay.io
- Updated Canal too
2017-08-21 09:33:12 -05:00
Vijay Katam
c92506e2e7 Add calico variable that enables ignoring Kernel's RPF Setting (#1493) 2017-08-20 14:01:09 +03:00
timtoum
3e457e4edf Enable weave seed mode for kubespray (#1414)
* Enable weave seed mode for kubespray

* fix task Weave seed | Set peers if existing peers

* fix mac address variabilisation

* fix default values

* fix include seed condition

* change weave var to default values

* fix Set peers if existing peers
2017-07-26 19:09:34 +03:00
AtzeDeVries
e160018826 Fixed conflicts, ipip:true as defualt and added ipip_mode 2017-07-08 14:36:44 +02:00
Kevin Jing Qiu
a742d10c54 Allow calico ipPool to be created with mode "cross-subnet" 2017-07-04 19:05:16 -04:00
AtzeDeVries
61b74f9a5b updated to direct control over ipip 2017-06-23 09:16:05 +02:00
AtzeDeVries
7332679678 Give more control over IPIP, but with same default behaviour 2017-06-20 14:50:08 +02:00
Brad Beam
780308c194 Merge pull request #1174 from jlothian/atomic-docker-restart
Fix docker restart in atomic
2017-06-07 12:05:32 -05:00
Justin Hunthrop
af55e179c7 adding --skip-exists flag for peer_with_router 2017-05-25 14:29:18 -05:00
Josh Lothian
7ae5785447 Removed the other unused handler
With live-restore: true, we don't need a special docker restart
2017-05-19 09:50:10 -05:00
Josh Lothian
ef8d3f684f Remove unused handler
Previous patch removed the step that sets live-restore
back to false, so don't try to notify that handler any more
2017-05-19 09:45:46 -05:00
Josh Lothian
6f67367b57 Leave 'live-restore' false
Leave live-restore false to updates always pick
up new network configuration
2017-05-17 14:31:49 -05:00
Josh Lothian
9ee0600a7f Update handler names and explanation 2017-05-17 14:31:49 -05:00
Josh Lothian
30cc7c847e Reconfigure docker restart behavior on atomic
Before restarting docker, instruct it to kill running
containers when it restarts.

Needs a second docker restart after we restore the original
behavior, otherwise the next time docker is restarted by
an operator, it will unexpectedly bring down all running
containers.
2017-05-17 14:31:49 -05:00
Josh Lothian
a5bb24b886 Fix docker restart in atomic
In atomic, containers are left running when docker is restarted.
When docker is restarted after the flannel config is put in place,
the docker0 interface isn't re-IPed because docker sees the running
containers and won't update the previous config.

This patch kills all the running containers after docker is stopped.
We can't simply `docker stop` the running containers, as they respawn
before we've got a chance to stop the docker daemon, so we need to
use runc to do this after dockerd is stopped.
2017-05-17 14:31:49 -05:00
Sergii Golovatiuk
674b71b535 Ansible 2.3 support
- Fix when clauses in various places
- Update requirements.txt
- Fix README.md

Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-04-26 15:22:10 +02:00
Matthew Mosesohn
e9a294fd9c Significantly reduce memory requirements
Canal runs more pods and upgrades need a bit of extra
room to load new pods in and get the old ones out.
2017-03-27 13:28:37 +03:00
Matthew Mosesohn
e1faeb0f6c Fix weave on RHEL deployment
Reduce retry delay checking weave
Always load br_netfilter module
2017-03-17 18:17:47 +03:00
Aleksandr Didenko
3a39904011 Move calico-policy-controller into separate role
By default Calico CNI does not create any network access policies
or profiles if 'policy' is enabled in CNI config. And without any
policies/profiles network access to/from PODs is blocked.

K8s related policies are created by calico-policy-controller in
such case. So we need to start it as soon as possible, before any
real workloads.

This patch also fixes kube-api port in calico-policy-controller
yaml template.

Closes #1132
2017-03-17 11:21:52 +01:00
Matthew Mosesohn
a422ad0d50 More idempotency fixes
Fixed sync_tokens fact
Fixed sync_certs for k8s tokens fact
Disabled register docker images changability
Fixed CNI dir permission
Fix idempotency for etcd pre upgrade checks
2017-03-15 19:06:39 +03:00
Artem Panchenko
fa05d15093 Allow connections from pods to local endpoints
By default Calico blocks traffic from endpoints
to the host itself by using an iptables DROP
action. It could lead to a situation when service
has one alive endpoint, but pods which run on
the same node can not access it. Changed the action
to RETURN.
2017-03-01 09:21:02 +02:00
Brad Beam
56664b34a6 Lower default memory requests
This is to address out of memory issues on CI as well as help
fit deployments for people starting out with kargo on smaller
machines
2017-02-27 10:53:43 -06:00
Bogdan Dobrelya
712872efba Rework inventory all by real groups' vars
* Leave all.yml to keep only optional vars
* Store groups' specific vars by existing group names
* Fix optional vars casted as mandatory (add default())
* Fix missing defaults for an optional IP var
* Relink group_vars for terraform to reflect changes

Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
2017-02-23 09:43:42 +01:00
Ivan Shvedunov
0006e5ab45 Fix shell special vars 2017-02-21 22:22:40 +03:00
Andrew Greenwood
ca9ea097df Cleanup legacy syntax, spacing, files all to yml
Migrate older inline= syntax to pure yml syntax for module args as to be consistant with most of the rest of the tasks
Cleanup some spacing in various files
Rename some files named yaml to yml for consistancy
2017-02-17 16:22:34 -05:00
Sergii Golovatiuk
e91e58aec9 Fix fact tags
Ansible playbook fails when tags are limited to "facts,etcd" or to
"facts". This patch allows to run ansible-playbook to gather facts only
that don't require calico/flannel/weave components to be verified. This
allows to run ansible with 'facts,bootstrap-os' or just 'facts' to
gether facts that don't require specific components.

Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-02-17 12:32:33 +01:00
Vladimir Rutsky
09847567ae set "check_mode: no" for read-only "shell" steps that registers result
"shell" step doesn't support check mode, which currently leads to failures,
when Ansible is being run in check mode (because Ansible doesn't run command,
assuming that command might have effect, and no "rc" or "output" is registered).

Setting "check_mode: no" allows to run those "shell" commands in check mode
(which is safe, because those shell commands doesn't have side effects).
2017-02-13 18:53:41 +03:00
Matthew Mosesohn
6ae70e03cb fixup upgrades for canal and weave 2017-02-10 13:27:41 +03:00
Matthew Mosesohn
29fd957352 Enable weave upgrade from previous versions
Raise readiness probe initial time to 60 (was 30)
2017-02-09 21:39:31 +03:00
Matthew Mosesohn
0a7c6eb9dc Merge pull request #998 from mattymo/fix_upgrade_daemonsets
Fix upgrade for all daemonset type resources
2017-02-09 20:02:21 +03:00
Sergii Golovatiuk
4124d84c00 Lower weave RAM settings.
- Since Weave 1.8.x was rewritten in Golang we may decrease RAM settings
  to continue using g1-small for CI
2017-02-08 18:50:36 +01:00
Matthew Mosesohn
3c713a3f53 Fix upgrade for all daemonset type resources
Daemonsets cannot be simply upgraded through a single API call,
regardless of any kubectl documentation. The resource must be
purged and then recreated in order to make any changes.
2017-02-08 18:16:00 +03:00
Matthew Mosesohn
fd30131dc2 Revert "Drop linux capabilities and rework users/groups" 2017-02-06 15:58:54 +03:00
Bogdan Dobrelya
cae2982d81 Merge pull request #911 from bogdando/DROP_CAPS
Drop linux capabilities and rework users/groups
2017-02-06 12:05:51 +01:00
Sergii Golovatiuk
f2e4ffcac2 Fix weave-net after upgrade to 1.82
- Set recommended CPU settings
- Cleans up upgrade to weave 1.82. The original WeaveWorks
daemonset definition uses weave-net name.
- Limit DS creation to master
- Combined 2 tasks into one with better condition
2017-02-02 10:31:58 +01:00
Matthew Mosesohn
39d87a96aa Rename weave-kube to weave-net
Cleans up upgrade to weave 1.82. The original WeaveWorks
daemonset definition uses weave-net name.
2017-01-31 18:47:27 +03:00
Brad Beam
a11b9d28bd Upgrading weave to weave-kube 2017-01-27 17:05:25 -06:00
Aleksandr Didenko
46c177b982 Switch to ansible_hostname in calico
For consistancy with kubernetes services we should use the same
hostname for nodes, which is 'ansible_hostname'.

Also fixing missed 'kube-node' in templates, Calico is installed
on 'k8s-cluster' roles, not only 'kube-node'.
2017-01-25 11:49:58 +01:00
Aleksandr Didenko
f05aaeb329 Fix calico-rr peering with k8s masters
Calico-rr is broken for deployments with separate k8s-master and
k8s-node roles. In order to fix it we should peer k8s-cluster
nodes with calico-rr, not just k8s-node. The same for peering
with routers.

Closes #925
2017-01-23 10:19:09 +01:00
Bogdan Dobrelya
cb2e5ac776 Drop linux capabilities and rework users/groups
* Drop linux capabilities for unprivileged containerized
  worlkoads Kargo configures for deployments.
* Configure required securityContext/user/group/groups for kube
  components' static manifests, etcd, calico-rr and k8s apps,
  like dnsmasq daemonset.
* Rework cloud-init (etcd) users creation for CoreOS.
* Fix nologin paths, adjust defaults for addusers role and ensure
  supplementary groups membership added for users.
* Add netplug user for network plugins (yet unused by privileged
  networking containers though).
* Grant the kube and netplug users read access for etcd certs via
  the etcd certs group.
* Grant group read access to kube certs via the kube cert group.
* Remove priveleged mode for calico-rr and run it under its uid/gid
  and supplementary etcd_cert group.
* Adjust docs.
* Align cpu/memory limits and dropped caps with added rkt support
  for control plane.

Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
2017-01-20 08:50:42 +01:00
Bogdan Dobrelya
79aeb10431 Merge pull request #858 from bradbeam/calicoctl-canal
Misc updates for canal
2017-01-10 12:24:59 +01:00
Aleksandr Didenko
d9539e0f27 Fix etcd cert generation for calico-rr role
"etcd_node_cert_data" variable is undefinded for "calico-rr" role.
This patch adds "calico-rr" nodes to task where "etcd_node_cert_data"
variable is registered.
2017-01-09 12:06:25 +01:00
Brad Beam
cf042b2a4c Create network policy directory for canal 2017-01-05 10:54:27 -06:00
Brad Beam
65c86377fc Adding calicoctl to canal deployment 2017-01-05 10:54:27 -06:00
Bogdan Dobrelya
5af2c42bde Better fix for different CoreOS os family facts
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
2017-01-05 16:32:08 +01:00
Bogdan Dobrelya
f7447837c5 Rename CoreOS fact
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
2017-01-05 14:02:29 +01:00
Bogdan Dobrelya
d8a2941e9e Fix cert paths for flannel/calico policy apps
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
2017-01-03 16:12:54 +01:00
Bogdan Dobrelya
58062be2a3 Drop non systemd OS types support
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
2017-01-02 12:14:03 +01:00
Bogdan Dobrelya
a56d9de502 Systemd units, limits, and bin path fixes
* Add restart for weave service unit
* Reuse docker_bin_dir everythere
* Limit systemd managed docker containers by CPU/RAM. Do not configure native
  systemd limits due to the lack of consensus in the kernel community
  requires out-of-tree kernel patches.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-12-28 15:49:42 +01:00
Matthew Mosesohn
e7a1949d85 Merge pull request #818 from mattymo/calico-rr-certs
Fix calico-rr to use etcd certs instead of kube certs
2016-12-28 08:47:16 +03:00
Matthew Mosesohn
6d9cd2d720 Fix calico-rr to use etcd certs instead of kube certs 2016-12-27 17:04:50 +03:00
Bogdan Dobrelya
79996b557b Rework ignore_errors to report no reds
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
2016-12-27 13:00:50 +01:00
Matthew Mosesohn
a4bce333a3 Merge pull request #760 from genti-t/issue-748-flannel-options
Fix Flannel network on CoreOS
2016-12-22 19:02:31 +03:00
Genti Topija
7c2785e083 Fix Flannel network on CoreOS
Resolves: #748
2016-12-22 16:50:04 +01:00
Matthew Mosesohn
ad796d188d Individual etcd ssl certs
Includes hooks for triggering calico, kubelet, and kube-apiserver restarts
if etcd certs changed.
2016-12-22 13:31:11 +03:00
Spencer Smith
8d9f207836 create systemd drop-in path if not existent 2016-12-21 13:06:12 -05:00
Bogdan Dobrelya
92f542938c Merge pull request #745 from kubernetes-incubator/fix_weave_start
Fix weave restart after docker daemon restart
2016-12-16 14:06:48 +01:00
Matthew Mosesohn
495d0b659a Fix weave restart after docker daemon restart 2016-12-16 14:15:22 +03:00
Bogdan Dobrelya
114ab5e4e6 Merge pull request #721 from adidenko/calico-add-rr
Add calico/routereflector support
2016-12-14 17:22:00 +01:00
Smaine Kahlouch
29874baf8a Merge pull request #708 from vwfs/cloud_network
Add support for cloud-provider based networking
2016-12-14 16:23:20 +01:00
Aleksandr Didenko
d57c27ffcf Add calico/routereflector support
Add BGP route reflectors support in order to optimize BGP topology
for deployments with Calico network plugin.

Also bump version of calico/ctl for some bug fixes.
2016-12-14 13:44:10 +01:00
Alexander Block
d20d5e648f Add pseudo network plugin called "cloud" to use cloud provider for network
Allow to let the cloud provider configure proper routing for nodes.
2016-12-13 17:30:10 +01:00
Bogdan Dobrelya
c75f394707 Address standalone kubelet config case
Also place in global vars and do not repeat the kube_*_config_dir
and kube_namespace vars for better code maintainability and UX.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-12-13 16:35:53 +01:00
Bogdan Dobrelya
a15d626771 Preconfigure DNS stack and docker early
In order to enable offline/intranet installation cases:
* Move DNS/resolvconf configuration to preinstall role. Remove
  skip_dnsmasq_k8s var as not needed anymore.

* Preconfigure DNS stack early, which may be the case when downloading
  artifacts from intranet repositories. Do not configure
  K8s DNS resolvers for hosts /etc/resolv.conf yet early (as they may be
  not existing).

* Reconfigure K8s DNS resolvers for hosts only after kubedns/dnsmasq
  was set up and before K8s apps to be created.

* Move docker install task to early stage as well and unbind it from the
  etcd role's specific install path. Fix external flannel dependency on
  docker role handlers. Also fix the docker restart handlers' steps
  ordering to match the expected sequence (the socket then the service).

* Add default resolver fact, which is
  the cloud provider specific and remove hardcoded GCE resolver.

* Reduce default ndots for hosts /etc/resolv.conf to 2. Multiple search
  domains combined with high ndots values lead to poor performance of
  DNS stack and make ansible workers to fail very often with the
  "Timeout (12s) waiting for privilege escalation prompt:" error.

* Update docs.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-12-09 17:30:55 +01:00
Bogdan Dobrelya
8cc84e132a Add tags
Add tags to allow more granular tasks filtering.
Add generator script for MD formatted tags found.
Add docs for tags how-to.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-12-09 12:14:28 +01:00
Bogdan Dobrelya
710d5ae48e Merge pull request #691 from adidenko/calico-old-cni-fix
Fix possible problems with legacy calicoctl
2016-12-08 12:00:08 +01:00
Matthew Mosesohn
bfc9bcb8c7 Force hardlink for calico/canal certs
Fixes: #669
2016-12-07 19:03:22 +03:00
Aleksandr Didenko
c9290182be Fix possible problems with legacy calicoctl
When running legacy calicoctl we do not specify calico hostname in
calico-node container thus we should not specify it in CNI config.

Also move 'legacy_calicoctl' set_fact task to the top.
2016-12-07 12:26:44 +01:00
Bogdan Dobrelya
36fe2cb5ea Merge pull request #584 from chadswen/docker-options-refactor
Docker Options Refactor
2016-12-07 07:57:53 +01:00
Aleksandr Didenko
b0079ccd77 Calico: fix peering with routers for new version
In new `calicoctl` version nodes peering with routers is broken.
We need to use predictable node names for calico-node and the
same names in calico `bgpPeer` resources and CNI.
2016-12-06 17:17:39 +01:00
Aleksandr Didenko
f1d7af11ee Update calico-node systemd unit
New calicoctl does not support --detach=false option, so we should
use a recommended way to run calico-node service:
http://docs.projectcalico.org/v2.0/usage/configuration/as-service

Closes #674, #675
2016-12-06 11:34:12 +01:00
Chad Swenson
8b5b27bb51 Docker Options Refactor 2016-12-02 15:07:51 -06:00
Aleksandr Didenko
ff7d489f2d Update calico/ctl image tag
We no longer need to use v0.22.0 for calicoctl since Kargo has
support for new calicoctl CLI format.

Also fixing condition logic for calico pool task.
2016-11-25 11:23:27 +01:00
Artem Panchenko
2c4b11f321 Fix Calico jinja template (systemd) 2016-11-23 11:43:53 +02:00
Bogdan Dobrelya
dff78f616e Allow pre-downloaded images to be used effectively
According to http://kubernetes.io/docs/user-guide/images/ :
By default, the kubelet will try to pull each image from the
specified registry. However, if the imagePullPolicy property
of the container is set to IfNotPresent or Never, then a local\
image is used (preferentially or exclusively, respectively).

Use IfNotPresent value to allow images prepared by the download
role dependencies to be effectively used by kubelet without pull
errors resulting apps to stay blocked in PullBackOff/Error state
even when there are images on the localhost exist.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-11-22 16:16:04 +01:00
Bogdan Dobrelya
dc58159d16 Merge pull request #621 from xenolog/calico_network_backend
Add ability to define network backend for Calico.
2016-11-22 14:55:47 +01:00
Bogdan Dobrelya
66f27ed1f3 Download images as dependencies of roles
Pre download all required container images as roles' deps.
Drop unused flannel-server-helper images pre download.
Improve pods creation post-install test pre downloaded busybox.
Improve logs collection script with kubectl describe, fix sudo/etcd/weave
commands.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-11-22 11:13:57 +01:00
Sergey Vasilenko
f6d69d0a00 Add ability to define network backend for Calico.
This patch introduce `calico_network_backend` global variable,
which allow to describe alternative network backend.
Default behavior is unchanged.
2016-11-18 16:38:18 +03:00
Aleksandr Didenko
e3470b28c5 Move CNI config and add MTU support for calico-cni
- Move CNI configuration creation for Calico to appropriate
network_plugin role from kubernetes/node.
- Add support for MTU configuration in Calico.
2016-11-15 18:05:11 +01:00
Bogdan Dobrelya
e587e82f7f Merge pull request #600 from adidenko/calico-cni-container-support
Replace calico-cni binaries with calico/cni container
2016-11-15 15:40:13 +01:00
Bogdan Dobrelya
876c4df1b6 Fix mountflags and kubelet config
Add missing --require-kubeconfig to the if..else stanza.
Make sure certs dirs mounted in RO.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-11-15 11:22:23 +01:00
Aleksandr Didenko
caa81f3ac2 Fix etcd ssl for canal
- Move CNI configuration from `kubernetes/node` role to
`network_plugin/canal`
- Create SSL dir for Canal and symlink etcd SSL files
- Add needed options to `canal-config` configmap
- Run flannel and calico-node containers with proper configuration
2016-11-14 14:49:17 +01:00
Aleksandr Didenko
965a1234d3 Replace calico-cni binaries with calico/cni container
Calico CNI binaries are also released/shipped in calico/cni
container. This patch replaces download of calico CNI binaries with
calico/cni container.
2016-11-14 12:19:58 +01:00
Artem Panchenko
c58bd33af7 Support new version of 'calicoctl' (>=v1.0.0)
Since version 'v1.0.0-beta' calicoctl is written
in Go and its API differs from old Python based
utility. Added support of both old and new version
of the utility.
2016-11-10 17:11:29 +02:00
Matthew Mosesohn
fe16fecd8f Fix canal's calico networking config for ETCD TLS
Also fixes kube-apiserver upgrade that was erroneously
deleted in a previous commit.
2016-11-10 12:49:47 +03:00
Matthew Mosesohn
9ea9604b3f Merge pull request #591 from kubernetes-incubator/etcdtls
Add etcd tls support
2016-11-10 12:32:13 +03:00
Matthew Mosesohn
a32cd85eb7 Add etcd TLS support 2016-11-09 18:38:28 +03:00
Matthew Mosesohn
95b460ae94 Remove etcd-proxy from all nodes and use etcd multiaccess 2016-11-09 13:31:12 +03:00
Aleksandr Didenko
60a217766f Add ConfigMap for basic configuration options
Container settings moved from deamonset yaml to a separate
configmap.
2016-11-08 12:57:34 +01:00
Aleksandr Didenko
309240cd6f Adding support for canal network plugin
This patch provides support for Canal network plugin installation
as a self-hosted app, see the following link for details:

https://github.com/tigera/canal/tree/master/k8s-install
2016-11-08 11:04:01 +01:00
Smana
056f4b6c00 upgrade to kubernetes version 1.4.0
test to change the machine type

Revert "test to change the machine type"

This reverts commit 7a91f1b5405a39bee6cb91940b09a0b0f9d3aee1.

use google dns server when no upstream dns are defined

comment upstream_dns_servers

update documentation

remove deprecated kubelet flags

Revert "remove deprecated kubelet flags"

This reverts commit 21e3b893c896d0291c36a07d0414f4cb88b8d8ac.
2016-10-10 22:44:47 +02:00
Smaine Kahlouch
9ca374a88d Merge pull request #491 from kubespray/calicopools
Allow calico to configure pool if tree exists, but no pools defined
2016-10-05 17:12:26 +02:00
Aleksandr Didenko
2b6866484e Allow to use custom "canalized" calico cni
- Allow to overwrite calico cni binaries copied from hyperkube
  by the custom ones.
- Fix calico-ipam deployment (it had wrong source in rsync)
- Make copy from hyperkube idempotent (use rsync instead of cp)
- Remove some orphaned comments
2016-09-28 18:09:20 +02:00
Anthony Haussmann
550bda951e Change method to set use_hyperkube_cni var bool
The precedent method returb a string "True\n" or "False\n", it seems to be an Ansible bug.
New method return a boolean
2016-09-27 16:41:09 +02:00
Matthew Mosesohn
a3fe1e78df Copy hyperkube CNI plugins when using weave 2016-09-26 12:02:19 +03:00
Matthew Mosesohn
a93639650f Allow calico to configure pool if tree exists, but no pools defined 2016-09-19 15:27:47 +03:00
Bogdan Dobrelya
5ed3916f82 Fix use_hyperkube_cni logic
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-09-16 13:07:04 +02:00
Bogdan Dobrelya
390764c2b4 Add retry_stagger var for failed download/pushes.
* Add the retry_stagger var to tweak push and retry time strategies.
* Add large deployments related docs.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-09-15 16:43:58 +02:00
Bogdan Dobrelya
422428908a Download containers and save all
Move version/repo vars to download role.
Add container to download params, which overrides url/source_url,
if enabled.
Fix networking plugins download depending on kube_network_plugin.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-09-15 16:43:56 +02:00
Matthew Mosesohn
b69d5f6e6e Fix logic handling for use_hyperkube_cni 2016-09-15 16:09:40 +03:00
Smaine Kahlouch
125cb0aa64 Merge pull request #481 from bogdando/issue/479
Add retries for copying binaries from containers and packages
2016-09-14 10:04:32 +02:00
Bogdan Dobrelya
6fdcaa1a63 Add retries for copying binaries from containers
Closes issue: https://github.com/kubespray/kargo/issues/479

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-09-13 15:09:34 +02:00
Anthony Haussmann
d47a2d03b4 Delete default variable use_hyperkube_cni
The variable is now set via a task depending of the version of kube
2016-09-13 14:59:50 +02:00
Anthony Haussmann
739cf59953 Determine hyperkube cni to use
Starting from version 1.3.4 of hyperkube, calico is "canalized" which requires flannel and hostonly cni plugins.So we let hyperkube ship necessary cni
2016-09-13 14:58:29 +02:00
Smaine Kahlouch
69f09e0f18 Merge pull request #461 from kubespray/issue-369
Issue 369
2016-08-31 15:09:33 +02:00
Matthew Mosesohn
26a0406669 Disable calicoctl from creating a default pool
Sometimes invoking calicoctl to create a pool also
creates a default pool, which causes errors in deploy.
2016-08-31 12:54:05 +03:00
Spencer Smith
a746d63177 ensure docker.service.d exists 2016-08-30 09:34:34 -07:00
Spencer Smith
0fc5e70c18 incorrect file name 2016-08-30 09:26:14 -07:00
Spencer Smith
b74c2f89f0 lay down a systemd dropin instead of the /run/flannel_docker_opts.env symlink 2016-08-30 09:17:41 -07:00
Matthew Mosesohn
b92404fd0a Enable customization of calico-node docker image
New vars: calico_node_image_repo and claico_node_image_tag
Defaults: calico/node and {{ calico_version }}, respectively
2016-08-27 16:25:39 +04:00
Bogdan Dobrelya
8168689caa Refactor roles and hosts
Shorten deployment time with:
- Remove redundand roles if duplicated by a dependency and vice versa
- When a member of k8s-cluster, always install docker as a dependency
  of the etcd role and drop the docker role from cluster.yaml.
- Drop etcd and node role dependencies from master role as they are
  covered by the node role in k8s-cluster group as well. Copy defaults
  for master from node role.
- Decouple master, node, secrets roles handlers and vars to be used w/o
  cross references.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-08-25 13:27:57 +02:00
Matthew Mosesohn
f073ee91ea Copy hyperkube cni plugins optionally for calico deployment
Hyperkube from CoreOS now ships with all binaries required for
calico and flannel (but not weave). It simplifies deployment for
some network plugin scenarios to not download CNI images.

TODO: Optionally disable downloading calico to /opt/cni/bin
2016-08-10 15:35:53 +03:00
Bogdan Dobrelya
d2c57142d3 Fix calico-node service unit
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-08-08 12:06:32 +02:00
Matthew Mosesohn
e8a1c7a53f Move docker systemd unit creation to docker role
Creating the unit using default settings early on
and then changing it during network_plugin section
leads to too many docker restarts and duplicated code.

Reversed Wants= dependence on docker.service so it does not
restart docker when reloading systemd

Consolidated all docker restart handlers.
2016-08-02 17:56:24 +03:00
Bogdan Dobrelya
2af71f31b4 Rework systemd service units
* Add for docker system units:
    ExecReload=/bin/kill -s HUP $MAINPID
    Delegate=yes
    KillMode=process.
* Add missed DOCKER_OPTIONS for calico/weave docker systemd unit.
* Change Requires= to a less strict and non-faily Wants=, add missing
  Wants= for After=.
* Align wants/after in a wat if Wants=foo, After= has foo as well.
* Make wants/after docker.service to ask for the docker.socket as well.
* Move "docker rm -f" commands from ExecStartPre= to ExecStopPost=.
  hooks to ensure non-destructive start attempts issued by Wants=.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-08-02 10:55:42 +02:00
Matthew Mosesohn
c7fef6cb76 Fix weave deployment task names 2016-07-30 23:12:41 +04:00
Antoine Legrand
6a7308d5c7 Merge pull request #372 from adidenko/calico-ipip-support
Support --ipip option for calico pool
2016-07-29 08:05:00 -07:00
Antoine Legrand
4419662fa0 Merge pull request #330 from jonbec/master
Add settable flannel image tag & image repo
2016-07-29 08:02:18 -07:00
Matthew Mosesohn
5668e5f767 Fix etcd restart and handler systemd tasks
Changed Wants=docker.service to docker.socket

Renamed handlers for reloading systemd to contain role in task name.
2016-07-29 16:32:35 +03:00
Aleksandr Didenko
c52c5f5056 Add run_once to define calico pool task name 2016-07-27 15:55:41 +02:00
Bogdan Dobrelya
731d32afda Add HA/LB endpoints for kube-apiserver
* Add HA docs for API server.
* Add auto-evaluated internal endpoints and clarify the loadbalancer_apiserver
vars and usecases.
* Use facts for kube_apiserver to not repeat code and enable LB endpoints use.
* Use /healthz check for the wait-for apiserver.
* Use the single endpoint for kubelet instead of the list of apiservers
* Specify kube_apiserver_count to for HA layout

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-07-25 17:25:45 +02:00
Matthew Mosesohn
d0a1e15ef3 Deploy kubelet and kube-apiserver as containers
kubelet via docker
kube-apiserver as a static pod

Fixed etcd service start to be more tolerant of slow start.

Workaround for kube_version to stay in download role, but not
download an files by creating a new "nothing" download entry.
2016-07-22 16:42:34 +03:00
Aleksandr Didenko
f94eb0b997 Support --ipip option for calico pool
Adds new boolean configuration variable for calico network plugin
`ipip`. When it's enabled calico pool is created with '--ipip'
option (IP-over-IP encapsulation across hosts).

Also refactor pool creation tasks to simplify logic and make tasks
more readable.
2016-07-21 13:05:40 +02:00
Matthew Mosesohn
7a86b6c73e Set default etcd deployment to docker
Improved docker reload command to wait for etcd to be
up before proceeding. Switched reload to run restart
because it can't reload if it is not guaranteed to be
in running state.
2016-07-20 18:26:16 +03:00
Bogdan Dobrelya
32cd6e99b2 Add etcd proxy support
* Enforce a etcd-proxy role to a k8s-cluster group members. This
provides an HA layout for all of the k8s cluster internal clients.
* Proxies to be run on each node in the group as a separate etcd
instances with a readwrite proxy mode and listen the given endpoint,
which is either the access_ip:2379 or the localhost:2379.
* A notion for the 'kube_etcd_multiaccess' is: ignore endpoints and
loadbalancers and use the etcd members IPs as a comma-separated
list. Otherwise, clients shall use the local endpoint provided by a
etcd-proxy instances on each etcd node. A Netwroking plugins always
use that access mode.
* Fix apiserver's etcd servers args to use the etcd_access_endpoint.
* Fix networking plugins flannel/calico to use the etcd_endpoint.
* Fix name env var for non masters to be set as well.
* Fix etcd_client_url was not used anywhere and other etcd_* facts
evaluation was duplicated in a few places.
* Define proxy modes only in the env file, if not a master. Del
an automatic proxy mode decisions for etcd nodes in init/unit scripts.
* Use Wants= instead of Requires= as "This is the recommended way to
hook start-up of one unit to the start-up of another unit"
* Make apiserver/calico Wants= etcd-proxy to keep it always up

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Co-authored-by: Matthew Mosesohn <mmosesohn@mirantis.com>
2016-07-19 14:09:40 +02:00
Jonathan Beckman
d4dfdf68a6 Add settable flannel image tag & image repo
New settings with defaults:
flannel_server_helper_image_repo: "gcr.io/google_containers/"
flannel_server_helper_image_tag: "0.1"
flannel_image_repo: "quay.io/coreos/flannel"
flannel_image_tag: "0.5.5"
2016-07-11 13:18:20 +08:00
Smaine Kahlouch
83da5d7657 Merge pull request #335 from mattymo/calicoctl
Change calicoctl deployment to use container
2016-07-07 21:47:40 +02:00
Alexandre Bourget
3b7eaf66b6 flanneld: don't redirect logs to an unreadable location, let docker/k8s see
and aggregate them.
2016-07-06 16:25:11 -04:00
Matthew Mosesohn
baf80b7d7e Change calicoctl deployment to use container
Improves upgradability of calicoctl by leveraging docker tags.
2016-07-05 13:49:03 +03:00
Chris Bell
9e59c74c24 Maintain backwards compatibility with EL6 2016-06-22 09:51:49 -04:00
Chris Bell
d94253ff6a Modify calico docker.service 2016-06-22 09:44:31 -04:00
Matthew Mosesohn
153b82a803 Add docker_options to calico networking 2016-06-14 19:33:44 +03:00
Smana
4a7d8c6fea clean conditions into docker templates 2016-06-02 21:01:41 +02:00
Spencer Smith
87757d4fcf provides initial docker options support 2016-05-25 12:56:45 -04:00
Paul Czarkowski
7de87d958e turn adduser/download roles into meta roles
This should make things a little more composable,
by making these roles meta roles that perform no
actions by default we allow each role to own its own
resources.
2016-05-22 17:25:52 -05:00
Smana
ae5ff890d4 fix flannel deployment, remove docker bridge before restarting 2016-05-13 18:10:00 +02:00
Paul Czarkowski
bd064e8094 fix flannel's cross vm networking for vagrant
* set flannel backend type to `host-gw`
* set flannel interface to be eth1 ip
2016-05-08 23:42:42 -05:00
Smaine Kahlouch
68fafd030d choose between gce and aws cloud providers 2016-03-23 17:27:06 +01:00
Smana
ede3aad2ab flannel backend type option 2016-03-04 14:55:04 +01:00
Smana
152c409022 calico: enabling nat outgoing by default 2016-02-21 17:11:49 +01:00
Smana
fca384e24c first version of CoreOS on GCE
Please enter the commit message for your changes. Lines starting
2016-02-21 00:06:36 +01:00
Smana
a649aa8b7e use ansible_service_mgr to detect init system 2016-02-13 11:46:53 +01:00
Smana
91fca69aa0 generate secrets on deployment machine
test travis with sudo=true instead of required
2016-02-13 06:51:54 +01:00
Smana
793d665db4 specify weave version 2016-02-10 18:19:03 +01:00
Smana
ab007e4ab8 weave network plugin 2016-02-09 17:55:12 +01:00
Smaine Kahlouch
4f92417a5d split network plugins into distinct roles 2016-02-09 11:42:00 +01:00
Smaine Kahlouch
779299de15 calico uses --ip option 2016-02-01 15:53:23 +01:00
Smaine Kahlouch
3bb6066558 add option '--nat-outgoing' for calico on clouds 2016-02-01 10:47:34 +01:00
Greg Althaus
6163fe166e Update docker for CentOS issues in AWS and general
variables.

1. AWS has issues with ext4 (use xfs instead for CentOS only)
2. Make sure all the centos config files are include in the systemd config
3. Make sure that network options are set in the correct file by os family

This allows downstream items like opencontrail and others change variables
in expected locations.
2016-01-30 21:46:32 -06:00
Antoine Legrand
b33713da4a Change calico condition --ipip 2016-01-29 14:07:21 +01:00
Antoine Legrand
83c1bd516d Update calico.yml 2016-01-29 12:23:29 +01:00
Antoine Legrand
5d24cabc83 Merge pull request #116 from ansibl8s/calico_on_cloud
Add --ipip to calico if on cloud_proivder
2016-01-28 20:28:15 +01:00
Antoine Legrand
7127e6de54 Add --ipip to calico if on cloud_proivder 2016-01-28 20:13:50 +01:00
Greg Althaus
bedcca922c Add variables and defaults for multiple types of ip addresses.
Each node can have 3 IPs.
1. ansible_default_ip4 - whatever ansible things is the first IPv4 address
   usually with the default gw.
2. ip - An address to use on the local node to bind listeners and do local
   communication.  For example, Vagrant boxes have a first address that is the
   NAT bridge and is common for all nodes.  The second address/interface should
   be used.
3. access_ip - An address to use for node-to-node access.  This is assumed to
   be used by other nodes to access the node and may not be actually assigned
   on the node.  For example, AWS public ip that is not assigned to node.

This updates the places addresses are used to use either ip or access_ip and walk
up the list to find an address.
2016-01-27 16:05:39 -06:00
Smaine Kahlouch
a323335d36 use 'kube_pods_subnet' var for flannel conf 2016-01-27 22:00:12 +01:00
ant31
fd6ac61afc Use local etcd/etcdproxy for calico 2016-01-26 17:28:30 +01:00
Antoine Legrand
b9781fa7c2 Symlink dnsmasq conf 2016-01-26 00:30:29 +01:00
Smaine Kahlouch
90ffb8489a fix some handlers 2016-01-25 22:49:24 +01:00
ant31
56b92812fa Fix systemd reload and calico unit 2016-01-25 10:54:07 +01:00
Greg Althaus
bcd6ecb7fb Add flannel vars to enable vagrant and amazon environments 2016-01-24 16:18:35 +01:00
Smaine Kahlouch
4984b57aa2 use rsync instead of command 2016-01-23 18:26:07 +01:00
Smaine Kahlouch
cb59559835 use command instead of synchronize 2016-01-22 16:37:07 +01:00
Antoine Legrand
078b67c50f Remove downloader host 2016-01-22 09:59:39 +01:00
Antoine Legrand
859f6322a0 Merge branch 'master' into add_set_remote_user 2016-01-19 21:08:52 +01:00
Antoine Legrand
f68d8f3757 Add seT_remote_user in synchronize 2016-01-19 14:20:05 +01:00
Smaine Kahlouch
7cab7e5fef restarting kubelet is sometimes required after docker restart 2016-01-19 13:47:07 +01:00
Smaine Kahlouch
8415634016 use google hyperkube image 2016-01-16 22:55:49 +01:00