491e260d20
* feat(): Add wireguard backend to flannel cni As described in the flannel docs: https://github.com/flannel-io/flannel/blob/master/Documentation/backends.md#wireguard This does not support optional configuration methods like: - setting a psk (will be autogenerated by default) - chang listening ports - change mode (defaults to 'separate') - change PersistentKeepaliveInterval (defaults to 0) * Add supported backends to flannel docs * Fix markdown in docs
1.8 KiB
1.8 KiB
Flannel
Flannel is a network fabric for containers, designed for Kubernetes
Supported backends: vxlan
, host-gw
and wireguard
Warning: You may encounter this bug with VXLAN
backend, while waiting on a newer Flannel version the current workaround (ethtool --offload flannel.1 rx off tx off
) is showcase in kubespray networking test.
Verifying flannel install
- Flannel configuration file should have been created there
cat /run/flannel/subnet.env
FLANNEL_NETWORK=10.233.0.0/18
FLANNEL_SUBNET=10.233.16.1/24
FLANNEL_MTU=1450
FLANNEL_IPMASQ=false
- Check if the network interface has been created
ip a show dev flannel.1
4: flannel.1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UNKNOWN group default
link/ether e2:f3:a7:0f:bf:cb brd ff:ff:ff:ff:ff:ff
inet 10.233.16.0/18 scope global flannel.1
valid_lft forever preferred_lft forever
inet6 fe80::e0f3:a7ff:fe0f:bfcb/64 scope link
valid_lft forever preferred_lft forever
- Try to run a container and check its ip address
kubectl run test --image=busybox --command -- tail -f /dev/null
replicationcontroller "test" created
kubectl describe po test-34ozs | grep ^IP
IP: 10.233.16.2
kubectl exec test-34ozs -- ip a show dev eth0
8: eth0@if9: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1450 qdisc noqueue
link/ether 02:42:0a:e9:2b:03 brd ff:ff:ff:ff:ff:ff
inet 10.233.16.2/24 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::42:aff:fee9:2b03/64 scope link tentative flags 08
valid_lft forever preferred_lft forever