Smaine Kahlouch fd0e5e756e Update README, new versions

2015-12-12 19:37:08 +01:00

6.5 KiB

Raw Blame History

kubernetes-ansible

Install and configure a kubernetes cluster including network plugin and optionnal addons. Based on CiscoCloud work.

Requirements

Tested on Debian Jessie and Ubuntu (14.10, 15.04, 15.10). The target servers must have access to the Internet in order to pull docker imaqes. The firewalls are not managed, you'll need to implement your own rules the way you used to.

Ansible v1.9.x

Components

kubernetes v1.1.2
etcd v2.2.2
calicoctl v0.12.0
flanneld v0.5.5
docker v1.9.1

Ansible

Download binaries

A role allows to download required binaries. They will be stored in a directory defined by the variable 'local_release_dir' (by default /tmp). Please ensure that you have enough disk space there (about 1G).

Note: Whenever you'll need to change the version of a software, you'll have to erase the content of this directory.

Variables

The main variables to change are located in the directory environments/[env_name]/group_vars/k8s-cluster.yml.

Inventory

Below is an example of an inventory. Note : The bgp vars local_as and peers are not mandatory if the var 'peer_with_router' is set to false By default this variable is set to false and therefore all the nodes are configure in 'node-mesh' mode. In node-mesh mode the nodes peers with all the nodes in order to exchange routes.

[downloader]
10.99.0.26

[kube-master]
10.99.0.26

[etcd]
10.99.0.26

[kube-node]
10.99.0.4
10.99.0.5
10.99.0.36
10.99.0.37

[paris]
10.99.0.26
10.99.0.4 local_as=xxxxxxxx
10.99.0.5 local_as=xxxxxxxx

[usa]
10.99.0.36 local_as=xxxxxxxx
10.99.0.37 local_as=xxxxxxxx

[k8s-cluster:children]
kube-node
kube-master

[paris:vars]
peers=[{"router_id": "10.99.0.2", "as": "65xxx"}, {"router_id": "10.99.0.3", "as": "65xxx"}]

[usa:vars]
peers=[{"router_id": "10.99.0.34", "as": "65xxx"}, {"router_id": "10.99.0.35", "as": "65xxx"}]

Playbook

---
- hosts: downloader
  sudo: no
  roles:
    - { role: download, tags: download }

- hosts: k8s-cluster
  roles:
    - { role: etcd, tags: etcd }
    - { role: docker, tags: docker }
    - { role: network_plugin, tags: ['calico', 'flannel', 'network'] }
    - { role: dnsmasq, tags: dnsmasq }

- hosts: kube-master
  roles:
    - { role: kubernetes/master, tags: master }

- hosts: kube-node
  roles:
    - { role: kubernetes/node, tags: node }

Run

It is possible to define variables for different environments. For instance, in order to deploy the cluster on 'dev' environment run the following command.

ansible-playbook -i environments/dev/inventory cluster.yml -u root

Kubernetes

Network Overlay

You can choose between 2 network plugins. Only one must be chosen.

flannel: gre/vxlan (layer 2) networking. (official docs)
calico: bgp (layer 3) networking. (official docs)

The choice is defined with the variable 'kube_network_plugin'

Expose a service

There are several loadbalancing solutions. The ones i found suitable for kubernetes are Vulcand and Haproxy

My cluster is working with haproxy and kubernetes services are configured with the loadbalancing type 'nodePort'. eg: each node opens the same tcp port and forwards the traffic to the target pod wherever it is located.

Then Haproxy can be configured to request kubernetes's api in order to loadbalance on the proper tcp port on the nodes.

Please refer to the proper kubernetes documentation on Services

Check cluster status

Kubernetes components

Master processes : kube-apiserver, kube-scheduler, kube-controller, kube-proxy Nodes processes : kubelet, kube-proxy, [calico-node|flanneld]

Check the status of the processes

systemctl status [process_name]

Check the logs

journalctl -ae -u [process_name]

Check the NAT rules

iptables -nLv -t nat

Available apps, installation procedure

There are two ways of installing new apps

Ansible galaxy

Additionnal apps can be installed with ansible-galaxy.

ou'll need to edit the file 'requirements.yml' in order to chose needed apps. The list of available apps are available there

For instance it is strongly recommanded to install a dns server which resolves kubernetes service names. In order to use this role you'll need the following entries in the file 'requirements.yml' Please refer to the k8s-kubdns readme for additionnal info.

- src: https://github.com/ansibl8s/k8s-common.git
  path: roles/apps
  # version: v1.0

- src: https://github.com/ansibl8s/k8s-kubedns.git
  path: roles/apps
  # version: v1.0

Note: the role common is required by all the apps and provides the tasks and libraries needed.

And empty the apps directory

rm -rf roles/apps/*

Then download the roles with ansible-galaxy

ansible-galaxy install -r requirements.yml

Git submodules

Alternatively the roles can be installed as git submodules. That way is easier if you want to do some changes and commit them.

You can list available submodules with the following command:

grep path .gitmodules | sed 's/.*= //'

In order to install the dns addon you'll need to follow these steps

git submodule init roles/apps/k8s-common roles/apps/k8s-kubedns
git submodule update

Finally update the playbook apps.yml with the chosen roles, and run it

...
- hosts: kube-master
  roles:
    - { role: apps/k8s-kubedns, tags: ['kubedns', 'apps']  }
...

ansible-playbook -i environments/dev/inventory apps.yml -u root

Calico networking

Check if the calico-node container is running

docker ps | grep calico

The calicoctl command allows to check the status of the network workloads.

Check the status of Calico nodes

calicoctl status

Show the configured network subnet for containers

calicoctl pool show

Show the workloads (ip addresses of containers and their located)

calicoctl endpoint show --detail

Flannel networking

Congrats ! now you can walk through kubernetes basics

6.5 KiB Raw Blame History