2022-06-12 18:00:51 +00:00
# gridfinity-catalog
2022-06-12 18:13:08 +00:00
This is a Catalog of Gridfinity designs and other relevant resources. Your pull requests are welcome!
2022-06-12 18:06:09 +00:00
2022-06-12 18:11:15 +00:00
# Introduction
In April of 2022, [Zack Freedman ](https://www.youtube.com/c/ZackFreedman/about ) announced Gridfinity to the world in this video:
2022-06-12 18:06:09 +00:00
[](https://www.youtube.com/watch?v=ra_9zU-mnl8)
2022-06-12 18:11:15 +00:00
2022-10-01 04:51:49 +00:00
Using a design based on earlier work by [Alexandre Chappel ](https://www.youtube.com/channel/UCe1Aj6VEO299Yq4WkXdoD3Q ), Zack designed a modular system that uses a gridded baseplate that accomodates blocks (also referred to as boxes or bins) sized to fit into one or more grid cells. After the publication of Zack's video, other designers began to adopt existing designs and to create new ones. This page is an attempt to catalog as many Gridfinity resources as possible.
2022-06-12 18:11:15 +00:00
2022-10-01 04:51:49 +00:00
In July of 2022, Zack published a follow-on video to highlight a plethora of community designs:
2022-07-04 19:36:33 +00:00
[](https://www.youtube.com/watch?v=Bd4NnHvTRAY)
2022-06-12 19:34:58 +00:00
# Getting Started with Gridfinity
* Pick a baseplate
* Pick some boxes
* Print
* Use
* Share
* Learn about parameterization and customization
2022-06-12 18:19:42 +00:00
# Baseplates
2022-07-18 18:54:59 +00:00
| Description | Sizes | Variants |Format | Date Added |
| :--- | ---: | ---: | ---: | :--- |
2022-07-22 03:02:59 +00:00
| [Baseplate 3x3.5 ](https://www.printables.com/model/244502-gridfinity-3x35 ) | 3x3.5 | 1 | STL | 2022-07-21 |
2022-07-21 14:53:07 +00:00
| [Baseplates ](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Baseplates-60925 ) | 1x2 - 7x7| 55 | STL | 2022-06-12 |
2022-07-21 14:50:45 +00:00
| [Baseplates (OpenSCAD Customizable) ](https://github.com/vector76/gridfinity_openscad/blob/main/gridfinity_baseplate.scad ) | | - | OpenSCAD | 2022-06-12 |
2022-07-25 20:59:11 +00:00
| [Basic Gridfinity Baseplates (CadQuery Customizable) ](https://www.printables.com/model/170956-basic-gridfinity-baseplates-cadquery-customizable ) | 1x1 - 10x10 | 22 | CadQuery | 2022-06-12 |
2023-03-30 10:03:47 +00:00
| [Baseplates with Pressure Fit Magnets ](https://www.printables.com/model/432024 ) | 1x1 - 7x7 | 130 | STL,F360,STP | 2023-03-30 |
2023-03-30 10:09:58 +00:00
| [Base with Snap Connectors ](https://www.printables.com/model/430144-gridfinity-base-with-snap-connectors ) | 1x1 - 7x7 | 30 | STL,STP | 2023-03-30 |
2023-05-16 18:49:21 +00:00
| [ClickFinity Baseplate - No Magnets ](https://www.printables.com/model/452675-gridfinity-clickplates-no-magnets-universally-comp ) | 1x1 - 7x7 | 49 | STL,F3D | 2023-05-16 |
2023-07-17 20:27:59 +00:00
| [Clickfinity Refined Baseplate ](https://www.printables.com/model/506105-clickfinity-refined-baseplates ) | 1x1-5x7 | 30 | STL | 2023-07-17 |
2023-03-19 07:56:38 +00:00
| [ClickPlate ](https://github.com/jrymk/gridfinity-eco ) - Secure **any** existing Gridfinity block without costly neodymium magnets and thick bin bottoms for the magnet holes | F3D available | - | Fusion 360, STL | 2023-03-19 |
2022-07-25 20:59:11 +00:00
| [CR10-CR10S Printer-Mounted Baseplate ](https://thangs.com/designer/cynical89/3d-model/CR10-CR10S%2520%2523Gridfinity%2520Printer-Mounted%2520Baseplate-61213 ) | 1x1 | 1 | STL | 2022-07-25 |
2022-09-27 00:41:35 +00:00
| [DDD Wall Control System ](https://github.com/aderusha/DDD-Printable-Wall-Control-System/tree/main/Centerpieces/Gridfinity ) | 2x2-5x9 | 15 | STL |
2022-07-25 20:59:11 +00:00
| [Ender 3 Baseplate Sidecar ](https://thangs.com/designer/uigghjghjlghjghghj/3d-model/Gridfinity%2520Ender%25203%2520Baseplate%2520Sidecar-61668 ) | 1x1 | 1 | STL |
| [Ender 3 Power ledge Baseplate ](https://thangs.com/designer/matty.nurseus/3d-model/Gridfinity%2520Power%2520ledge-62697 ) | 2x1 | 1 | STL | 2022-07-25 |
| [Ender 3 Pro and V2 Baseplate double ](https://www.thingiverse.com/thing:5393982 ) | 2x1 | 1 | STL | 2022-07-25 |2022-07-25 |
2022-09-06 15:57:28 +00:00
| [Ikea Skadis Baseplate ](https://www.printables.com/model/171690-gridfinity-x-skadis-frames ) - baseplates that attach to Ikea Skadis pegboards |1x2 - 2x7 | 12 | STL | 2022-09-06 |
2022-07-21 20:29:08 +00:00
| [Improved Baseplate ](https://thangs.com/designer/christian.wilhelmsen2012/3d-model/Gridfinity%2520slightly%2520improved%2520frame%2520(no%2520rocking )-64672) | 2x2 - 6x6 | 8 | 3MF | 2022-06-12 |
2023-05-16 18:41:59 +00:00
| [Jesh Baseplates for Crappy Printers ](https://www.printables.com/model/471686-jesh-plates-gridfinty-for-crappy-printers ) | 1x1 - 6x6 | 19 | STEP | 2023-05-16 |
| [Lasercut Base ](https://myhub.autodesk360.com/ue29c81a3/g/shares/SH512d4QTec90decfa6e7f2938df1b06f971 ) | 7x12 | 1 | F3D | 2023-05-16 |
2022-10-31 00:17:08 +00:00
| [Magnet Light Baseplate ](https://www.printables.com/model/250550-gridfinity-magnet-light-baseplate ) | 1x1 - 8x8 | 36 | STL/F3D | 2022-10-30 |
2022-08-13 02:42:22 +00:00
| [Minimal Baseplate ](https://thangs.com/designer/Ace%20G/3d-model/Minimal%2520Baseplate%25204x4.stl-260576 ) | 4x4 + Customizable | 1 | STL, F3D | 2022-08-12 |
2023-03-30 10:03:47 +00:00
| [Parametric Wall Control Baseplates ](https://thangs.com/designer/pathartl007/3d-model/Gridfinity%20Parametric%20Wall%20Control%20Baseplates-107139 ) | 4x1 - 5x6 | 18 | 3MF | 2022-06-12 |
2022-07-21 20:29:08 +00:00
| [Pegboard ](https://thangs.com/designer/sincityscales/3d-model/gridfinity%2520pegboard-62612 ) | 1x4 - 3x4 | 3 | STL | 2022-06-12 |
| [Printer-Mounted Baseplates ](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Printer-Mounted%20Baseplates-60929 ) - Baseplates that mount on various 3D printers | 1x1 | 6 | STL | 2022-06-12 |
2022-10-31 00:15:23 +00:00
| [Screw Together Baseplate ](https://www.printables.com/model/300603-gridfinity-screw-together-baseplate/files ) | 1x1 - 7x7 | 28 | STL | 2022-10-27 |
2022-07-21 20:36:51 +00:00
| [Sideless Platforms ](https://www.printables.com/model/209998-gridfinity-sideless-bins-and-platforms ) | 1x1 - 5x5 | 15 | STL | 2022-06-18 |
2023-01-09 14:39:05 +00:00
| [Snap Together Baseplate with Captured Magnets ](https://www.printables.com/model/356890-gridfinity-snap-together-baseplate-with-captured-m ) | 2x1 - 5x5 | 20 | 3MF, F3D, STEP | 2023-01-09 |
2022-10-27 22:48:16 +00:00
| [Support-less Weighted Baseplates (CadQuery Customizable) ](https://thangs.com/designer/jdegs/3d-model/Support-less%20Weighted%20Gridfinity%20Baseplates%20(CadQuery%20Customizable )-65042) | 1x1 - 7x7 | 13 | STL | 2022-06-12 | 28 |
2022-10-27 22:40:39 +00:00
| [Thin Baseplate with Magnets ](https://www.printables.com/model/303923-gridfinity-thin-base-with-magnets ) | 2x2 - 6x6 | 15 | STL | 2022-10-27 |
2022-08-13 02:42:22 +00:00
| [Thinner Minimal Baseplate ](https://thangs.com/designer/Ace%20G/3d-model/Thinner%2520Minimal%2520Baseplate%25204x4.stl-260577 ) | 4x4 + Customizable | 1 | STL, F3D | 2022-08-12 |
2022-09-21 16:06:16 +00:00
| [Under-Desk Drawer ](https://www.printables.com/model/267929-gridfinity-under-desk-drawer ) | 4x4 | 1 | STL + STEP | 2022-09-21 |
2022-12-06 23:44:09 +00:00
| [VESA Shelf ](https://www.tinkercad.com/things/dx6BXXMHsrs-vesa-gridfinity-1x3-shelf ) and [VESA Shelf Back ](https://www.tinkercad.com/things/133jXDA6OXN-vesa-gridfinity-2-shelf-back ) | 1x3 | 1 | STL | 2022-12-06 |
2022-07-25 20:59:11 +00:00
| [Vertical Baseplate ](https://www.printables.com/model/229566-gridfinity-vertical-baseplate/files ) | 4x3 | 1 | STL/F3D | 2022-07-25 |
| [Voron printer (2020 extrusion) Baseplate ](https://www.printables.com/model/175108-gridfinity-holder-for-voron-printers-2020-extrusio/files ) | 1x1 | 1 | STL/F3D | 2022-07-25 |
2022-07-21 20:36:51 +00:00
| [Wall Rack ](https://thangs.com/designer/ashleyi100/3d-model/Gridfinity%2520Wall%2520Rack-62669?part=3080e1c0-6ce6-4cd3-a17e-1b8e37b7f676 ) | 1x4 | 1 | STL | 2022-06-17 |
2022-07-22 11:16:12 +00:00
| [Weighted Baseplate 5x7.stl ](https://social.thangs.com/m/187707 ) | 5x7 | 1 | STL | 2022-07-22 |
| [Weighted Baseplate 7x7.stl ](https://social.thangs.com/m/187945 ) | 7x7 | 1 | STL | 2022-07-22 |
2022-07-25 20:14:28 +00:00
2022-06-12 18:19:42 +00:00
# Blocks
2022-07-19 13:35:32 +00:00
| Description | Sizes | Variants |Format | Date Added |
| :--- | ---: | ---: | ---: | :--- |
2022-07-25 20:54:11 +00:00
| [18650 holder ](https://thangs.com/designer/paxtoncoghlin/3d-model/Gridfinity%25201x1%252018650%2520holder-62043 ) | 1x1 | 1 | 3MF | 2022-07-25 |
2022-10-26 19:41:45 +00:00
| [42mm Bottle Holder ](https://thangs.com/designer/LengAwaits/3d-model/Gridfinity%25201x1%252042mm%2520Bottle%2520Holder%2520-%2520Fits%2520120ml%2520Chubby%2520Gorilla%2520e-Liquid%2520Bottles-196488 ) | 1x1 | 1 | STL | 2022-09-26 |
2022-07-21 20:36:51 +00:00
| [3D Printing Accessories ](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%203D%20Printing%20Bundle%20for%20Nerds-60741 ) | 1x1, 1x3 | 7 | STL | 2022-06-16 |
2022-07-25 20:54:11 +00:00
| [8 AA batteries storage ](https://thangs.com/designer/anime_reference/3d-model/Gridfinity%2520-%25202x1%25208%2520AA%2520batteries%2520storage-66292 ) | 2x1 | 1 | STL/F3D | 2022-07-25 |
2022-07-21 20:40:38 +00:00
| [9V Battery Holder ](https://www.printables.com/model/225989-gridfinity-9v-battery-holder ) | 1x1, 1x2 | 2 | 3MF | 2022-07-01 |
2022-07-21 20:29:08 +00:00
| [AA Battery Holder ](https://thangs.com/designer/Pestilence204/3d-model/Gridfinity%25202x1%252010xAA%2520Battery%2520Holder-103178 ) | 1x2 | 1 | STL | 2022-06-12 |
2022-07-21 20:40:38 +00:00
| [AAA Battery Container ](https://www.printables.com/model/219701-gridfinity-aaa-battery-containers ) | 1x1, 1x2 | 2 | STL | 2022-07-01 |
2022-07-22 03:02:59 +00:00
| [Acrylic Paint Holder ](https://www.printables.com/model/245563-gridfinity-acrylic-paint-holder ) | 1x3 | 1 | STL | 2022-07-21 |
2022-07-25 20:54:11 +00:00
| [Adjustable Jumper Wire Comb ](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Adjustable%2520Jumper%2520Wire%2520Comb-174402 ) | 1x1 | 2 elements | STL | 2022-07-25 |
2023-01-06 16:22:03 +00:00
| [Adjustable Light ](https://www.printables.com/en/model/273727-adjustable-light ) | 2x2 | 1 | STL | 2023-01-06 |
2022-07-21 20:29:08 +00:00
| [Allen Key Metric ](https://thangs.com/designer/gregbutorin/3d-model/Gridfinity%201x1%20Allen%20Key%20Metric.stl-66340 ) | 1x1 | 1 | STL | 2022-06-12 |
2022-09-04 11:57:46 +00:00
| [Angled Bin ](https://thangs.com/designer/Machenna56k/3d-model/Gridfinity%20%7C%20Angled%20Bin-267623 ) | 4x2 | 1 + 4 inserts | STL | 2022-09-04 |
2022-07-21 21:01:42 +00:00
| [Audio Jack Holder (3.5mm & 6.35mm) ](https://thangs.com/designer/terra_blocks/3d-model/Gridfinity%25201x1x1%25203.5mm%2520and%25206.35mm%2520Audio%2520Jack%2520Holder-190314 ) | 1x1 | 1 | STL | 2022-07-11 |
2022-09-04 11:57:46 +00:00
| [Bambu X1C Nozzles ](https://thangs.com/designer/endolux/3d-model/Gridfinity%2520Bambu%2520X1C%2520Nozzles.stl-306832 ) | 1x1 | 1 | STL | 2022-09-04 |
2022-07-21 20:29:08 +00:00
| [Basic Undivided Gridfinity Boxes ](https://www.printables.com/model/174715-basic-undivided-gridfinity-boxes-cadquery-customiz ) | 1x1 - 5x5 | 28 | CadQuery | 2022-06-12 |
2022-07-25 20:54:11 +00:00
| [Battery Box: CR2032/CR2016, 357/303/SR44 and A23/MN21/AAA slots ](https://www.printables.com/model/208053-gridfinity-battery-box-cr2032cr2016-357303sr44-and ) | 1x1 | 1 | 3MF/F3D | 2022-07-25 |
2022-07-21 20:40:38 +00:00
| [Big Storage Boxes ](https://www.printables.com/model/176917-gridfinity-big-storage-boxes ) | 4x1 - 5x5 | 36 | STL | 2022-06-25 |
2023-03-30 10:03:47 +00:00
| [Bins with Pressure Fit Magnets ](https://www.printables.com/model/432024 ) | 1x1 - 7x7 | 1508 | STL,F360,STP | 2023-03-30 |
| [Bolt Sorter ](https://www.thingiverse.com/thing:5402658 ) | 1x2 | 1 | STL | 2022-09-04 |
2022-07-21 20:36:51 +00:00
| [Bottle ](https://thangs.com/designer/NKCVic/3d-model/Gridfinity%2520Bottle-62763 ) | 1x1 | 4 | STL | 2022-06-17 |
2022-07-25 21:00:14 +00:00
| [Bottle Cap ](https://thangs.com/designer/kkobold/3d-model/Gridfinity%2520Bottle%2520Cap-67096 ) | 1x1 | 1 | STL | 2022-07-25 |
2023-04-10 04:30:23 +00:00
| [Bowls ](https://www.printables.com/model/447389-gridfinity-bowls ) | 1x1,1x2,1x4,2x2 | 4 | STL | 2023-04-09 |
2022-09-04 11:57:46 +00:00
| [Breadboard Holders ](https://www.printables.com/model/248418 ) | 1x2, 2x2, 2x4 | 3 | F3D + STL | 2022-09-04 |
2022-08-16 20:22:08 +00:00
| [Cable Tray ](https://www.printables.com/model/247724-gridfinity-cable-tray ) | 1x3 | 1 | STL | 2022-08-16 |
2022-07-21 20:36:51 +00:00
| [Caliper Holder ](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Caliper%20Holder-62216 ) | 1x2 | 1 | STL | 2022-06-16 |
2022-07-22 03:02:59 +00:00
| [Can Holder ](https://www.printables.com/model/245372-gridfinity-can-holder ) | 2x2 | 1 | STL | 2022-07-21 |
2022-09-04 11:57:46 +00:00
| [Case for Scalpels ](https://www.printables.com/model/241400 ) | 4x2 | 1 | F3D + STL | 2022-09-04 |
2023-03-15 17:49:15 +00:00
| Celtic Knot Bin | 1x1 ([std](https://social.thangs.com/m/733950), [ext ](https://social.thangs.com/m/733951 )), 1x2 ([std](https://social.thangs.com/m/733953), [ext ](https://social.thangs.com/m/733956 )), 2x2 ([std](https://social.thangs.com/m/733962), [ext ](https://social.thangs.com/m/733965 )) | 1 | STL | 2023-03-15 |
2022-09-04 11:57:46 +00:00
| [Chalk Holder ](https://thangs.com/designer/doubleyuhtee/3d-model/Gridfinity%25201x1%2520chalk%2520holder-65847 ) | 1x1 | 1 | STL | 2022-09-04 |
| [Chisel Holder ](https://thangs.com/designer/pussyNugget/3d-model/Gridfinity%2520Chisel%2520Holder.stl-67081 ) | 4x7 | 1 | STL | 2022-09-04 |
| [Cigfinity Pack Dispenser ](https://thangs.com/designer/Machenna56k/3d-model/Gridfinity%20%7C%20Cigfinity%20Pack%20Dispenser-212826 ) | 3x2 | 2 | STL | 2022-09-04 |
2022-07-21 20:54:04 +00:00
| [CNC Tool Holders ](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20CNC%20Tool%20Holders-60739 ) | 1x2, 2x2, 3x3 | 4 | STL | 2022-07-19 |
2022-07-21 20:29:08 +00:00
| [Coin Cell Battery Holder ](https://thangs.com/designer/bcsmithies/3d-model/Gridfinity%20Coin%20Cell%20Battery%20Holders-72538 ) | 1x1, 1x2 | 1 | STL | 2022-06-12 |
2022-07-21 20:54:04 +00:00
| [Collet Holder ](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Collet%20Holder%20Collet-ction-60743 ) | 1x3, 2x3 | 1 | STL | 2022-07-19 |
| [Collet Holder for CNC ](https://www.printables.com/model/175705-gridfinity-collet-holder-cnc ) | 2x2, 2x3 | 2 | STL | 2022-07-19 |
2022-07-19 13:43:26 +00:00
| [Credit Cards ](https://thangs.com/designer/Alex%20Dresko/3d-model/Gridfinity%2520credit%2520cards%25202x2-7-192951 ) |2x2 | 1 | STL | 2022-07-18 |
2022-07-20 18:05:08 +00:00
| [Deburring Tool, countersink, and spare blades ](https://www.printables.com/model/244752-gridfinity-deburring-tool ) | 1x2 | 1 | STL | 2022-07-20 |
2022-07-25 20:54:11 +00:00
| [Dense 9 Full SD & 9 Micro SD Card Storage ](https://thangs.com/designer/thingymaker9000/3d-model/Gridfinity%25201x1%2520Dense%25209%2520Full%2520SD%2520%2526%25209%2520Micro%2520SD%2520Card%2520Storage-66001 ) | 1x1 | 1 | STL | 2022-07-25 |
2022-07-20 18:05:08 +00:00
| [Diamond Needle File kit ](https://www.printables.com/model/244748-gridfinity-diamond-needle-file-set ) | 1x1 | 1 | STL | 2022-07-20 |
2022-10-26 19:51:43 +00:00
| [Dice Holder for DnD and other TTRPG ](https://www.printables.com/model/295485-gridfinity-dice-holder-for-dnd-and-other-ttrpg ) | 1x3 | 7 | STL | 2022-10-26 |
2022-07-21 14:53:07 +00:00
| [Divider Bins ](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Divider%2520Bins-60721 ) | 1x1 - 5x1 | 51 variants | STL | 2022-06-12 |
2022-07-21 20:36:51 +00:00
| [Divided Boxes (CadQuery Customizable) ](https://thangs.com/designer/jdegs/3d-model/Divided%20Gridfinity%20Boxes%20(CadQuery%20Customizable )-64757) | 1x1 - 5x5 | 37 | STL | 2022-06-13 |
2022-07-21 17:36:02 +00:00
| [Divider Box for Breadboard Jumper Wires ](https://thangs.com/designer/whoistobias/3d-model/Gridfinity%2520Divider%2520Box%2520for%2520Breadboard%2520Jumper%2520Wires-186348?s=09 ) | 2x5 | 1 | STL | 2022-07-21 |
2023-02-26 21:15:03 +00:00
| [Divided Vase Bins with Labels ](https://www.printables.com/model/389300 ) | 1x1-1x5 | 120 | STL | 2023-02-26 |
2022-07-19 13:48:43 +00:00
| [Door'ed Container ](https://thangs.com/designer/Machenna56k/3d-model/Gridfinity%2520%257C%2520Door%27d%2520Container-200852 ) | 2x2 | 1 | STL | 2022-07-18 |
2022-07-21 17:37:34 +00:00
| [Drawers ](https://thangs.com/designer/Machenna56k/3d-model/Gridfinity%2520Drawers-188528?s=09 ) | 2x3,4x6 | 6 | STL | 2022-07-21 |
2022-07-21 20:36:51 +00:00
| [Dremel Bit ](https://thangs.com/designer/ash.westawizard/3d-model/gridfinity%20dremel%20bit%203x2-62856 ) | 3x2 | 1 | STL | 2022-06-19 |
2022-07-25 20:54:11 +00:00
| [Dremel Box Organizer ](https://www.printables.com/model/217722-dremel-box-organiser-gridfinity-based ) | - | 17 elements | STL | 2022-07-19 |
2022-09-04 11:57:46 +00:00
| [Drill Caddy ](https://thangs.com/designer/Zwierzak%252C%2520Does%2520a%2520Thing/3d-model/Gridfinity%2520Drill%2520Caddy-65743 ) | 2x2 | 1 | STEP | 2022-09-04
2022-07-25 20:54:11 +00:00
| [Engineer SS-02 Solder Sucker ](https://www.printables.com/en/model/217839-gridfinity-engineer-ss-02-solder-sucker ) | 1x1 | 1 | STL | 2022-07-25 |
2022-07-20 15:04:48 +00:00
| [Epson Label Cartridge Holder ](https://social.thangs.com/m/201086 ) | 2x2, 2x4 | 4 | STL | 2022-07-20 |
2023-03-30 10:09:58 +00:00
| [Filled Bins Full Height No Lip ](https://www.printables.com/model/410744-gridfinity-filled-bins-full-height-no-lip ) | 0.5x0x5 - 7x7 | 3MF | 2023-03-23 |
2023-03-20 17:01:09 +00:00
| [Filled-In Boxes for Customization ](https://www.printables.com/model/210548-filled-in-gridfinity-boxes-for-customization ) | 1x1-7x7 | 39 | STL | 2023-03-20 |
2022-07-19 13:52:36 +00:00
| [Flip-Top Container ](https://thangs.com/designer/Machenna56k/3d-model/Gridfinity%2520Flip-Top%2520Container-192949 ) | 1x3 | 1 | STL | 2022-07-18 |
2022-07-21 21:00:32 +00:00
| [Funnel ](https://www.printables.com/model/188075-gridfinity-funnel ) | 1x1 | 1 | STL | 2022-07-19 |
2022-09-27 00:30:43 +00:00
| [Fusion360 Templates ](https://thangs.com/designer/KptnAutismus/3d-model/Gridfinity%2520Templates%2520%28Filled%2520in%2520and%2520Hollow%29%2520for%2520Fusion360-202057 ) | Varies | 3 | F3D | 2022-09-26 |
2022-07-22 18:03:30 +00:00
| [Glasses (3x) Stand ](https://www.printables.com/model/245600-gridfinity-glasses-3x-stand ) | 1x3 | 1 | STL | 2022-07-22 |
2022-07-21 14:50:45 +00:00
| [Glue Stick ](https://github.com/vector76/gridfinity_openscad/blob/main/gridfinity_glue_stick.scad ) | 1x1 | 1 | OpenSCAD | 2022-06-12 |
2022-07-21 20:40:38 +00:00
| [Gorilla Glue Holder ](https://www.printables.com/model/185876-gridfinity-gorilla-glue-holder ) | 1x1 | 1 | STL | 2022-07-01 |
2022-09-04 11:57:46 +00:00
| [GoPro Holder ](https://thangs.com/designer/martinwew/3d-model/Gridfinity%202x1%20gopro%20holder.STL-313028 ) | 1x2 | 1 | STL | 2022-09-04 |
2022-09-19 23:29:35 +00:00
| [Half Boxes ](https://www.printables.com/model/241907-gridfinity-half-box ) | 0.5x1 - 0.5x3 | 10 | STL | 2022-09-19 |
2023-03-15 18:03:06 +00:00
| [Height Tool ](https://thangs.com/designer/myway2build3d/3d-model/Gridfinity%20Height%20Tool%20-666915 ) | 1x1 | 1 | STP + 3MF | 2023-03-15 |
2022-07-25 20:54:11 +00:00
| [Helping Hand ](https://thangs.com/designer/dangerclose35/3d-model/%2523Gridfinity%2520helping%2520hand-61040 ) | 1x1 | 1 | STL | 2022-07-25 |
2022-09-27 00:44:51 +00:00
| [Helping Hands Base ](https://thangs.com/designer/faalzin/3d-model/Gridfinity%2520Helping%2520Hands%2520Base-260671 ) | 1x1 | 1 | STL | 2022-09-08 |
2022-07-21 20:29:08 +00:00
| [Hex Baskets ](https://thangs.com/designer/bigbrisco/3d-model/%2523Gridfinity%2520UPDATED%25204%252F18%252F22!%2520Hex%2520Baskets-61207 ) | 1x1-3x5 | 21 | STL | 2022-06-12 |
2022-07-19 13:58:22 +00:00
| [Hex Bit Holder ](https://www.printables.com/model/236793-gridfinity-hex-bit-holder )| 1x3 | 2 | STL | 2022-07-08 |
2022-07-21 20:29:08 +00:00
| [Hex Bit Storage with Tray, 2x2 ](https://thangs.com/designer/beakerz/3d-model/Gridfinity%202x2%20Hex%20Bit%20Storage%20with%20Tray-62484 ) | 2x2 | 2 | STL | 2022-06-12 |
2022-07-21 20:36:51 +00:00
| [Hex Bit Storage with Tray, 2x4 ](https://thangs.com/designer/beakerz/3d-model/Gridfinity%204x2%20Hex%20Bit%20Storage%20with%20Tray-62472 ) | 2x4 | 1 | STL | 2022-06-18 |
2022-09-06 17:57:05 +00:00
| [Hobby Knife Stand ](https://thangs.com/designer/anonym_xxl/3d-model/2x1GridfinityHobbyKnifeStand.stl-321683 ) | 1x2 | 1 | STL | 2022-09-06 |
2023-05-31 03:38:57 +00:00
| [Hyper Tough 20-piece Ratchet Holder ](https://www.printables.com/model/494188-gridfinity-ratchet-holder-hyper-tough-14-20-piece- ) | 4x3 | 1 | STL,F3D | 2023-05-29 |
2022-07-21 21:00:32 +00:00
| [iFixit Mako + ES121 Screwdriver Holders ](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20iFixit%20Mako%20%2B%20ES121%20Screwdriver%20Holders-60744 ) | 1x4,2x4 | 3 | STL | 2022-07-19 |
2022-07-21 20:29:08 +00:00
| [Jumbo Glue Stick Holder ](https://thangs.com/designer/kc0rpm/3d-model/Jumbo%20Glue%20Stick%20Holder.stl-74462 ) | 1x1 | 1 | STL | 2022-06-12 |
2022-07-21 21:00:32 +00:00
| [Jumper Wire Holder ](https://www.printables.com/model/193846-gridfinity-jumper-wire-holder ) | 1x1 | 1 | STL | 2022-07-19 |
2022-09-04 11:57:46 +00:00
| [Kitchen Caddy Jr. ](https://thangs.com/designer/Machenna56k/3d-model/Gridfinity%20%7C%20Kitchen%20Caddy%20Jr.-217330 ) | 2x1 | 1 | STL | 2022-09-04 |
| [Kitchen Caddy Sr. ](https://thangs.com/designer/Machenna56k/3d-model/Gridfinity%2520%257C%2520Kitchen%2520Caddy%2520Sr.-217328 ) | 4x3 | 1 + 3 trays | STL | 2022-09-04 |
| [LCD Display Holder ](https://thangs.com/designer/jeman/3d-model/Gridfinity%202x%20lcd%20display%20Holder.stl-201107 ) | 2x1 | 1 | STL | 2022-09-04 |
| [Lid ](https://thangs.com/designer/noelboettcher2004/3d-model/Gridfinity%2520lid-194358 ) | 1x1 | 1 | STL | 2022-09-04 |
2023-05-16 18:49:21 +00:00
| [Lite Ultra Boxes ](https://www.printables.com/model/435429-gridfinity-lite-ultra-boxes-improved-version-with- ) | 168 | 1x1 - 5x5 | STL,F3D | 2023-05-16 |
2022-07-20 15:11:21 +00:00
| [Lithium Button Battery Beast ](https://www.printables.com/model/244721-gridfinity-lithium-button-battery-beast ) | 1x3 | 1 | STL | 2022-07-20 |
2022-09-04 11:57:46 +00:00
| [Long n' Tall Drawer ](https://thangs.com/designer/Machenna56k/3d-model/Gridfinity%20%7C%20Long%20n'%20Tall%20Drawer-228161 ) | 1x3 | 2 parts | STL | 2022-09-04 |
| [Mechanical Keyboard Keycap Storage Trays ](https://thangs.com/designer/LengAwaits/3d-model/Gridfinity%2520Mechanical%2520Keyboard%2520Keycap%2520Storage%2520Trays%2520(5x5%2520and%25205x7 )-238569) | 5x5, 5x7 | 4 | STL | 2022-09-04 |
2023-06-05 02:08:27 +00:00
| [Mechanical Pencil (Staedtler Micro 775) Holder ](https://www.printables.com/model/498295-gridfinity-mechanical-pencil-holder-mars-staedtler ) | 2x1 | 1 | STL, F3D | 2023-06-04 |
2022-09-04 11:57:46 +00:00
| [M6 Washer Holder ](https://thangs.com/designer/Jonathan%2520Anderson/3d-model/Gridfinity%2520-%2520M6%2520washer%2520holder-65094 ) | 1x1 | 1 | F3D + STL | 2022-09-04 |
2023-03-08 01:25:57 +00:00
| [Minifig Display Base ](https://www.printables.com/model/284008-gridfinity-minifig-display-base ) | 1xx, 3x4 | 2 | STL, STEP | 2023-01-09 |
2022-08-16 20:25:11 +00:00
| [Minifinity Bin Collection ](https://www.printables.com/model/247815-gridfinity-minifinity-bin-collection ) | 1x1-4x2 | 9 | STL | 2022-07-29 |
2022-07-25 20:54:11 +00:00
| [Mintion Beagle Cam Mount ](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Mintion%2520Beagle%2520Cam%2520Mount-174265 ) | 2x2 | 2 elements | STL | 2022-07-25 |
2022-09-04 11:57:46 +00:00
| [Model Paint Holder ](https://thangs.com/designer/pussyNugget/3d-model/Gridfinity%20model%20paint%20organiser-75049 ) | 3x3 | 1 | STL | 2022-09-04 |
2022-12-06 23:41:45 +00:00
| [Modular Drawer System ](https://www.printables.com/model/300896-gridfinity-modular-drawer-system ) | 3x5 | 1 | STL | 2022-12-06 |
2022-07-25 20:54:11 +00:00
| [Mounted Hanging Trash Can ](https://thangs.com/designer/thing3dyer/3d-model/%2523Gridfinity%2520Mounted%2520Hanging%2520Trash%2520Can-64964 ) | 2x2 | 2 elements | STL | 2022-07-25 |
2022-07-21 20:29:08 +00:00
| [Nippers, Strippers, Pliers Rack ](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Nippers%20%2B%20Strippers%20%2B%20Pliers%20Racks-61120 ) | 1x4,2x4,1x5 | 3 | STL | 2022-06-12 |
2022-09-27 00:39:25 +00:00
| [OpenSCAD Templates ](https://github.com/kennetek/gridfinity-rebuilt-openscad ) | Varies | 2 | OpenSCAD | 2022-09-26 |
2022-07-28 18:36:04 +00:00
| [Open Ended Holders ](https://thangs.com/designer/atucom/3d-model/Gridfinity%2520Open%2520Ended%2520Holders-62240 ) | 1x5 - 4x5 | 10 | STL | 2022-07-21 |
2022-09-04 11:57:46 +00:00
| [Paint Shelf ](https://thangs.com/designer/bigbrisco/3d-model/%23Gridfinity%20Paint%20Shelf-62255 ) | 2x3, 3x3, 4x3 | 3 | F3D + STL | 2022-09-04 |
2022-07-20 15:04:48 +00:00
| [Paper Towel Roll ](https://social.thangs.com/m/201112 ) | 3x4 | 1 | STL | 2022-07-20 |
2022-09-27 00:50:45 +00:00
| [Parametric Bottle with Cap ](https://www.printables.com/model/278947-gridfinity-parametric-bottle-with-knurled-cap ) | 1x1-4x4 | 7 | STL,F3D | 2022-09-26 |
2022-07-26 03:44:53 +00:00
| [Pelican 3310 Flashlight Holder ](https://www.printables.com/model/248122-gridfinity-1x1-holder-for-pelican-3310-flashlight ) | 1x1 | 1 | STL | 2022-07-25 |
2022-07-21 20:29:08 +00:00
| [Pen, Pencil, Marker Holder ](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Pen%252C%2520Pencil%252C%2520and%2520Marker%2520Holders-60745 ) | 1x2 | 3 | STL | 2022-06-12 |
2022-07-21 20:40:38 +00:00
| [Phone Stand ](https://www.printables.com/model/177160-gridfinity-phone-stand ) | 1x1 | 1 | STL | 2022-07-01 |
2022-07-21 20:29:08 +00:00
| [Pic + Tweezers Rack ](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Pick%20%2B%20Tweezer%20Racks-60742 ) | 2x2 | 1 | STL | 2022-06-12 |
2022-07-25 20:54:11 +00:00
| [Pinecil Solder iron Holder ](https://thangs.com/designer/markh018/3d-model/Gridfinity%2520Pinecil%2520Solder%2520iron%2520Holder-73357 ) | 1x1 | 1 | STL | 2022-07-25 |
2022-12-06 23:41:45 +00:00
| [Bin - Vase Mode ](https://www.tinkercad.com/things/eGFlfBAA6Jx-1x4x77-vase-mode ) | 1x4 | 1 | Tinkercad | 2022-12-06 |
2022-07-21 20:29:08 +00:00
| [Plain Bin ](https://thangs.com/designer/pmcquay/3d-model/gridfinity%20plain%20bins-61698 ) | 1x1-3x4 | 26 | 3MF | 2022-06-12 |
2022-07-25 20:54:11 +00:00
| [Plain Bins ](https://thangs.com/designer/robert.j.paisley/3d-model/Plain%2520Bins-73750 ) | 3x6 | 2 | STL | 2022-07-25 |
| [(Plain Bin) Dispenser lids ](https://thangs.com/designer/robert.j.paisley/3d-model/Dispenser%2520lids-73748 ) | 3x6 | 2 | STL | 2022-07-25 |
2022-08-16 20:24:05 +00:00
| [Post-It Stack Container ](https://www.printables.com/model/251977-gridfinity-post-it-stack-container ) | 2x2 | 1 | STL | 2022-08-16 |
2022-09-04 11:57:46 +00:00
| [Prusa Pliers and Flat Cuts ](https://www.printables.com/model/240253 ) | 1x1 | 1 | 3MF + STL | 2022-09-04 |
2022-07-25 20:54:11 +00:00
| [Raspberry Pi Case ](https://thangs.com/designer/bigbrisco/3d-model/%2523Gridfinity%2520Raspberry%2520Pi%2520Case-61718 ) | 2x2 | 1 | STL | 2022-07-25 |
2022-09-04 11:57:46 +00:00
| [Raspberry Pi Pico Holder ](https://thangs.com/designer/jeman/3d-model/Gridfinity%2520Raspberry%2520Pi%2520Pico%2520Holder.stl-198518 ) | 2x1 | 1 | STL | 2022-09-04 |
| [Raspberry Pi Zero Holder ](https://thangs.com/designer/jeman/3d-model/Gridfinity%2520Raspberry%2520Pi%2520Zero%2520Holder.stl-198515 ) | 2x1 | 1 | STL | 2022-09-04 |
2022-09-27 00:26:13 +00:00
| [Ratchet Holder ](https://www.printables.com/model/282674-gridfinity-ratchet-holder-1x4 ) | 1x4 | 1 | STL | 2022-09-26 |
2022-07-21 17:36:53 +00:00
| [Ratchet Screwdriver Holder ](https://thangs.com/designer/jrsunday/3d-model/Gridfinity%20Ratchet%20Screwdriver%20Holder-74638 ) | 1x3 | 1 | STL | 2022-07-11 |
2022-07-21 21:00:32 +00:00
| [Ratchet + Socket Holders ](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Ratchet%20%2B%20Socket%20Holders-60906 ) | 1x3,1x4,1x5 | 5 | STL | 2022-07-19 |
2022-07-21 17:36:53 +00:00
| [Ruler & Pen Pot ](https://thangs.com/designer/obscuresausage/3d-model/%2523Gridfinity%2520-%2520Ruler%2520%2526%2520Pen%2520Pot-75753 ) | 1x2 | 1 | STL | 2022-07-11 |
2022-09-04 11:57:46 +00:00
| [Ruler Holder ](https://thangs.com/designer/atrimbletlr/3d-model/Gridfinity%2520Ruler%2520Holder-74621 ) | 1x1 | 1 | STL | 2022-09-04 |
2022-07-19 14:22:31 +00:00
| [Screwdriver Rack ](https://www.printables.com/model/237438-gridfinity-screwdriver-rack ) | 1x2 | 1 | STL | 2022-07-08 |
| [Sharpie Holder ](https://thangs.com/mythangs/file/191487 ) | 1x1 | 1 | STL | 2022-07-18 |
2022-07-21 20:36:51 +00:00
| [Sideless Bins ](https://www.printables.com/model/209998-gridfinity-sideless-bins-and-platforms ) | 1-5x5 | 27 | STL | 2022-06-18 |
2022-09-04 11:57:46 +00:00
| [Slide-Up Drawer ](https://thangs.com/designer/Machenna56k/3d-model/Gridfinity%20%7C%20Slide-Up%20Drawer-303350 ) | 2x1x2 | 2 parts | STL | 2022-09-04 |
2022-07-21 14:50:45 +00:00
| [Socket Holder ](https://github.com/vector76/gridfinity_openscad/blob/main/gridfinity_socket_holder.scad ) | ? | ? | OpenSCAD | 2022-06-12 |
2022-07-21 20:36:51 +00:00
| [Solder and Wire Spool Holder ](https://thangs.com/designer/cogspace/3d-model/Gridfinity%20Solder%20and%20Wire%20Spool%20Holder-73624 ) | 2x3 | 1 | STL | 2022-06-19 |
2022-07-25 20:54:11 +00:00
| [Solder Reel Stand ](https://www.printables.com/model/196782-gridfinity-solder-reel-stand ) | 2x2 | 1 | STL | 2022-07-25 |
2022-08-16 20:24:05 +00:00
| [Small Part Sort and Storage ](https://www.printables.com/model/218364-sortfinity-gridfinity-small-part-sort-and-storage ) | 2x2 | 1 | STL | 2022-08-16 |
2022-09-04 11:57:46 +00:00
| [Spade Bit Holder ](https://thangs.com/designer/rbarbrow/3d-model/Spade%2520Bit%2520Holder%2520Gridfinity-216505 ) | 4x3 | 1 | STL | 2022-09-22 |
2023-03-21 21:54:16 +00:00
| [Spiralized Gridfinity Bins ](https://thangs.com/designer/DaveMakesStuff/3d-model/Spiralized%20Gridfinity%20Bins-758773 ) | 1x1 | 1 | STL | 2023-03-21 |
2022-09-04 11:57:46 +00:00
| [Spudger Holder ](https://www.printables.com/model/256886 ) | 1x1 | 1 | F3D + STL | 2022-09-04 |
2022-09-27 00:50:45 +00:00
| [Stackable Citadel Paint Pot Storage ](https://www.printables.com/model/267790-gridfinity-stackable-citadel-paint-pot-storage ) | 1x1-6x6 | 5 | STL,F3D | 2022-09-26 |
2022-09-27 00:37:38 +00:00
| [Starbond CA Glue Variety Pack ](https://www.printables.com/model/280137-starbond-ca-glue-variety-pack-holder-3-2oz-bottles ) | 2x3 | 1 | STL | 2022-09-21 |
2022-09-04 11:57:46 +00:00
| [Sticky Note Holder ](https://thangs.com/designer/Robot_taco_sauce/3d-model/Gridfinity%2520sticky%2520note%2520holder.stl-194948 ) | 2x2 | 1 | STL | 2022-09-04 |
2022-07-21 21:00:32 +00:00
| [Storage Boxes ](https://www.printables.com/model/175692-gridfinity-storage-boxes ) | 1x1-3x3 | 24 | STL | 2022-07-19 |
2022-09-04 11:57:46 +00:00
| [Superglue Bottle Holder ](https://www.printables.com/model/177516-gridfinity-box-for-superglue-bottles ) | 1x1,3x3 | 2 | STL | 2022-07-19 |
2022-10-26 19:42:37 +00:00
| [Swinger Trays ](https://thangs.com/designer/Machenna56k/3d-model/Gridfinity%2520%257C%2520Swinger%2520Trays-262514 ) | 2x2 | 1 | STL | 2022-09-26 |
2022-09-04 11:57:46 +00:00
| [Swinging Drawer ](https://thangs.com/designer/Machenna56k/3d-model/Gridfinity%2520%257C%2520Swinging%2520Drawer-201480 ) | 3x3 | 2 | STL | 2022-09-04 |
| [Tabletop (Gaming) ](https://www.thingiverse.com/thing:5454853 ) | 1x1 | 3 | STL | 2022-09-04
2022-07-21 20:40:38 +00:00
| [Tape Dispenser ](https://www.printables.com/model/234669-gridfinity-tape-dispenser ) | 1x2 | 1 | 3MF | 2022-07-01 |
2022-09-04 11:57:46 +00:00
| [Tape Holder ](https://thangs.com/designer/bcsmithies/3d-model/Gridfinity%203x3%20Tape%20Holder-72448 ) | 3x3 | 1 | STL | 2022-09-04 |
2022-07-21 20:29:08 +00:00
| [Tarot Card Box ](https://www.printables.com/model/199465-gridfinity-boxes-for-tarot-cards ) | 1x3, 2x3 | 4 | STL | 2022-06-12 |
2022-09-27 00:50:45 +00:00
| [Template with Mid-Air Holes ](https://www.printables.com/model/269834-gridfinity-template-modified-for-mid-air-holes ) | 1x1 | 1 | STL,F3D | 2022-09-26 |
2022-07-21 20:29:08 +00:00
| [Testors Paint Jars ](https://thangs.com/designer/me252613057338/3d-model/Gridfinity%2520Testors%25202x3%2520for%25209-74539 ) | 1x2 | 1 | STL | 2022-06-12 |
2023-03-01 01:34:57 +00:00
| [Threaded Insert Tips Holder ](https://www.printables.com/model/408938-gridfinity-threaded-insert-tips-holder ) | 1x2 | 1 | STL | 2023-02-28 |
2022-08-16 20:22:08 +00:00
| [Tiered Bins ](https://www.printables.com/model/247302-gridfinity-tiered-bins ) | 1x1 | 3 | STL | 2022-08-16 |
2022-07-25 20:54:11 +00:00
| [The One SD Card Holder ](https://thangs.com/designer/atucom/3d-model/Gridfinity%2520The%2520One%2520SD%2520Card%2520Holder-61775 ) | 1x1 | 1 | STL | 2022-07-25 |
2022-07-26 03:44:53 +00:00
| [Tinkercad Blanks ](https://www.tinkercad.com/things/0e6jUnl4tIr ) | Varies | 8 | Tinkercad | 2022-07-25 |
2022-07-25 20:54:11 +00:00
| [Ultimate Battery Holder (AA, AAA, AAAA, 2032, LR44, A97, 18650, 9v) ](https://thangs.com/designer/Michael%20Fuchs/3d-model/Gridfinity%25203x5%2520Ultimate%2520Battery%2520Holder%2520%28AA%252C%2520AAA%252C%2520AAAA%252C%25202032%252C%2520LR44%252C%2520A97%252C%252018650%252C%25209v%29-62533 ) | 3x5 | 1 | STL | 2022-07-25 |
2022-07-21 14:53:07 +00:00
| [USB & Micro SD Holder ](https://thangs.com/designer/thingymaker9000/3d-model/Gridfinity%2520USB%2520%2526%2520Micro%2520SD%2520Holder-62708 ) | 1x1 | 1 | STL | 2022-06-12 |
2022-07-21 20:29:08 +00:00
| [USB and SD Card Holder ](https://thangs.com/designer/bigbrisco/3d-model/%23Gridfinity%20Usb%20and%20SD%20Card%20Holder%20-61209 ) | 1x2 | 1 | STL | 2022-06-12 |
2022-07-21 14:53:07 +00:00
| [Vase Mode Single Box ](https://thangs.com/designer/LittleHobbyShop/3d-model/%23gridfinity%20Vase%20Mode%20Single%20Box-65828 ) | 1x1 | 4 | STL | 2022-06-12 |
2022-09-06 15:58:55 +00:00
| [Watch Band Holder ](https://www.printables.com/model/268905-gridfinity-watch-band-holder ) | 2x3 | 1 | STL | 2022-09-06 |
2023-03-15 17:43:29 +00:00
| [Wera Imperial 950 Allen Key Holder ](https://www.printables.com/model/407463-gridfinity-wera-imperial-9509-hex-plus-2-inches/files ) | 4x7 | 1 | STL | 2023-03-15 |
| [Wera Metric 950 Allen Key Holder ](https://www.printables.com/model/407467-gridfinity-wera-metric-950-spkl9-sm-hf ) | 4x7 | 1 | STL | 2023-03-15 |
2022-07-21 20:40:38 +00:00
| [Wera Screwdriver Holder ](https://www.printables.com/model/232947-gridfinity-wera-screwdriver-holder ) | 1x3 | 1 | STL | 2022-07-01 |
2022-07-25 20:46:34 +00:00
| [Wire Spool Holder ](https://thangs.com/designer/bigbrisco/3d-model/%2523Gridfinity%2520Wire%2520Spool%2520Holder-61472 ) | 4x1 | 1 | STL/F3D | 2022-07-25 |
| [Workbench Dremel Bit storage Remix ](https://thangs.com/designer/thing3dyer/3d-model/%2523Gridfinity%2520Workbench%2520Dremel%2520Bit%2520storage%2520Remix-63134 ) | 5x3 | 1 | STL | 2022-07-25 |
2022-07-25 20:54:11 +00:00
| [Xacto Holder ](https://thangs.com/designer/kaspertulstrup/3d-model/%2523gridfinity%2520xacto%2520holder-67913 ) | 1x1 | 1 | STL | 2022-07-25 |
2022-09-04 11:57:46 +00:00
| [Xiaomi Wowstick 1F+ Holder ](https://thangs.com/designer/bn326160/3d-model/Xiaomi%2520Wowstick%25201F%252B%2520%2523Gridfinity%2520holder%2520-98140 ) | 2x5 | 2 | STL | 2022-09-04 |
| [Ziggurat Storage Bin ](https://thangs.com/designer/Machenna56k/3d-model/Gridfinity%20%7C%20Ziggurat%20Storage%20Bin-216412 ) | 3x3 | 1 | STL | 2022-09-04 |
2022-07-25 20:14:28 +00:00
2022-07-28 18:36:04 +00:00
# Adapters
| Description | Sizes | Variants |Format | Date Added |
| :--- | ---: | ---: | ---: | :--- |
| [Gridfinity Adapters ](https://thangs.com/designer/atucom/3d-model/Gridfinity%2520Adapters-61462 ) | 1x1 - 5x5 | 1 | STL/F3D | 2022-07-28
| [Height Adaptive Spacers ](https://thangs.com/designer/bigbrisco/3d-model/%2523Gridfinity%2520Height%2520Adaptive%2520Spacers-61820 ) | various | 30 | STL | 2022-07-25 |
2022-07-19 22:19:22 +00:00
2022-10-26 19:47:48 +00:00
# Templates
| Description | Sizes | Variants |Format | Date Added |
| :--- | ---: | ---: | ---: | :--- |
| [Base Template with Improved Holes and Weight Slots ](https://www.printables.com/model/275757-gridfinity-base-template-with-improved-holes-and-w ) | 1x1 | 2 | STEP,F3D,STL | 2022-10-26 |
| [Template with Mid-Air Holes ](https://www.printables.com/model/269834-gridfinity-template-modified-for-mid-air-holes ) | 1x1 | 1 | 3MF,F3D | 2022-10-26 |
2022-06-18 00:54:24 +00:00
# Everything Else
2022-07-25 20:14:28 +00:00
| Description | Sizes | Variants |Format | Date Added |
| :--- | ---: | ---: | ---: | :--- |
2022-10-26 19:51:43 +00:00
| [Gridfinity Lifted ](https://www.printables.com/model/300982-gridfinity-lifted ) | 1x2 - 2x4 | 27 | SCAD,STL | 2022-10-26 |
2022-07-25 20:14:28 +00:00
| [Mega-Gridfinity ToGo Box ](https://thangs.com/designer/ww9a/3d-model/Mega-Gridfinity%2520ToGo%2520Box-65503 ) | 4x4 | 1 | STL | 2022-06-17 |
2022-07-25 20:46:34 +00:00
| [Toolbox (Parametric) ](https://thangs.com/designer/jaswlodarczyk/3d-model/Gridfinity%2520Toolbox%2520%28Parametric%29-67053 ) | 5x3 | 7 elements | STL | 2022-07-25 |
2022-12-17 19:46:33 +00:00
| [Pegboard Gridfinity ](https://thangs.com/designer/evanmeltzer/3d-model/Peg%20Board%20Gridfinity%20Bin%20System-509457 ) | 2x2 | 4 | STL | 2022-12-17 |
2023-01-16 18:40:26 +00:00
| [Modular Expandable Storage Box ](https://www.printables.com/model/369813-fully-printable-gridfinity-box-parametric ) | 2x3, 4x5, 4x7 | 3 | STL | 2023-01-16 |
2023-07-17 20:25:21 +00:00
| [Gridfinity Label Maker ](https://www.printables.com/model/525297-gridfinity-label-maker ) | - | 1 | EXE, STL, PDF | 2023-07-17 |
2023-08-31 14:29:47 +00:00
| [Gridfinity Storage Box ](https://www.printables.com/model/543553-gridfinity-storage-box-by-pred ) | 4x3 - 7x6 | 6 | STL, F3D | 2023-08-31 |
2022-06-18 00:54:24 +00:00
2022-06-12 19:13:45 +00:00
# Articles
* [Gridfinity: 3D Printed Super Quick Tool Storage And Retrieval ](https://hackaday.com/2022/04/18/gridfinity-3d-printed-super-quick-tool-storage-and-retrieval/ ).
2022-07-04 20:03:56 +00:00
# Videos
2022-07-21 20:43:37 +00:00
* [Organize Your Messy Workspaces and Drawers with Gridfinity! Hastag #Gridfinity ](https://www.youtube.com/watch?v=ZhIF1O4_aj0 ), 2022-07-04.
* [A Quick Look at Gridfinity ](https://www.youtube.com/watch?v=jJNx9FWgSM0 ), 2022-07-04.
* [Revenge Of The 5th | Gridfinity Enclosure Imperial Inspired ](https://www.youtube.com/watch?v=Vo-mQe38-Bk ), 2022-07-04.
2022-09-08 22:01:29 +00:00
* [3D Printing Your New Workshop Organization System ](https://www.youtube.com/watch?v=KtbKwAuwv9s ), 2022-09-08.
2022-09-11 23:52:22 +00:00
* [To Gridfinity and Beyond - Decluttering my Workshop with Gridfinity ](https://www.youtube.com/watch?v=hTjcp_R7Bbg ) - 2022-09-11.
2022-10-27 22:48:16 +00:00
* [Overkill Gridfinity Baseplate ](https://www.youtube.com/watch?v=EWTE9uL3jnQ ) - 2022-10-27.
2022-12-06 21:51:27 +00:00
* [Store Anything Anywhere with Gridfinity! 20+ Weird Printable Organizers by Makers Like You! ](https://www.youtube.com/watch?v=7FCwMq-rVsY ) - 2022-12-06.
2023-03-20 14:38:30 +00:00
* [My TOP 3D Printed Organization Systems ](https://www.youtube.com/watch?v=kN8-9mgatTo ) - 2023-03-20.
2023-03-20 14:52:39 +00:00
* [Gridfinity Tips: 3D Printing Your New Workshop Organization System ](https://www.youtube.com/watch?v=KtbKwAuwv9s ) - 2023-03-20.
2023-03-21 21:54:16 +00:00
* [Spiralized Gridfinity Bins ](https://www.youtube.com/watch?v=kjh1qQ6FsXY ) - 2023-03-21.
* [Gridfinity is Parameteric? ](https://www.youtube.com/watch?v=WBBFElrOziI ) - 2023-03-21.
2023-03-21 22:15:06 +00:00
* [Aluminum Gridfinity ](https://www.youtube.com/watch?v=OesuCeZICQ4 ) - 2023-03-21.
* [Gridfinity Print Progress ](https://www.youtube.com/watch?v=yihv38j6xeM ) - 2023-03-21.
2023-03-30 09:42:49 +00:00
* [Gridfinity Using OnShape ](https://www.youtube.com/watch?v=95REky02tWE ) - 2023-03-30.
2022-07-04 20:03:56 +00:00
2022-06-12 18:19:42 +00:00
# Other Resources
2022-07-21 14:50:45 +00:00
* [gridfinity_openscad ](https://github.com/vector76/gridfinity_openscad ) - OpenSCAD code to generate baseplates and other blocks (2022-06-12).
2022-06-12 19:02:53 +00:00
* [/r/gridfinity ](https://www.reddit.com/r/gridfinity/ ) - Gridfinity sub-Reddit.
2022-07-18 16:05:02 +00:00
* [Custom Gridfinity Bins ](https://github.com/RashKash103/custom-gridfinity-bins ) - Python Script: This project will allow you to create custom Gridfinity divider bins.
2022-12-06 23:09:38 +00:00
* [Gridfinity Rebuilt in OpenSCAD ](https://github.com/kennetek/gridfinity-rebuilt-openscad ) - Parameterized OpenSCAD for baseplates and bins, including vase mode (2022-12-06).
2023-02-26 21:36:56 +00:00
* [Gridfinity Design Reference ](https://gridfinity.xyz/specification/ ) - A reference tool for designing Gridfinity modules.
2023-02-28 00:10:10 +00:00
* [Gridfinity Bin Generator ](https://gridfinity.bouwens.co/ ) - Generates custom Gridfinity divider bin STL files.
2023-03-20 14:41:13 +00:00
* [Gridfinity Freaks ](https://www.facebook.com/groups/894771558536705 ) - Facebook Community.
2022-12-06 23:09:38 +00:00
