Chamfer section was not touching the bottom layers. Maybe this was causing problems with slicing in Cura
This commit is contained in:
K Hodson 2023-02-05 23:16:23 -07:00
parent 1a3199cdcd
commit 6804bf9983
2 changed files with 15 additions and 8 deletions

View file

@ -59,6 +59,7 @@ gridz_define = 0; // [0:gridz is the height of bins in units of 7mm increments -
// how tabs are implemented // how tabs are implemented
style_tab = 0; // [0:continuous, 1:broken, 2:auto, 3:right, 4:center, 5:left, 6:none] style_tab = 0; // [0:continuous, 1:broken, 2:auto, 3:right, 4:center, 5:left, 6:none]
// where to put X cutouts for attaching bases // where to put X cutouts for attaching bases
// selecting none will also disable crosses on bases
style_base = 0; // [0:all, 1:corners, 2:edges, 3:auto, 4:none] style_base = 0; // [0:all, 1:corners, 2:edges, 3:auto, 4:none]
// tab angle // tab angle
@ -74,7 +75,7 @@ else gridfinityVase(); // Generate the bin
// ===== CONSTRUCTION ===== // // ===== CONSTRUCTION ===== //
d_bottom = layer*bottom_layer; d_bottom = layer*(max(bottom_layer,1));
x_l = length/2; x_l = length/2;
dht = (gridz_define==0)?gridz*7 : (gridz_define==1)?h_bot+gridz+h_base : gridz-(enable_lip?3.8:0); dht = (gridz_define==0)?gridz*7 : (gridz_define==1)?h_bot+gridz+h_base : gridz-(enable_lip?3.8:0);
@ -147,6 +148,10 @@ module gridfinityVase() {
block_inset(); block_inset();
if (enable_pinch) if (enable_pinch)
block_pinch(); block_pinch();
if (bottom_layer <= 0)
translate([0,0,-50+layer+0.01])
cube([gridx*length*10,gridy*length*10,100], center=true);
} }
} }
@ -169,6 +174,7 @@ module gridfinityBaseVase() {
rotate([0,0,90]) rotate([0,0,90])
translate([0,0,-h_base+d_bottom+0.01]) translate([0,0,-h_base+d_bottom+0.01])
cube([0.001,length*gridx,d_height+d_bottom*2]); cube([0.001,length*gridx,d_height+d_bottom*2]);
} }
pattern_circular(4) pattern_circular(4)
@ -191,6 +197,7 @@ module gridfinityBaseVase() {
cube([length*2, length*2, h_base], center = true); cube([length*2, length*2, h_base], center = true);
} }
if (style_base != 4)
linear_extrude(d_bottom) linear_extrude(d_bottom)
profile_x(0.1); profile_x(0.1);
} }
@ -403,17 +410,17 @@ module profile_wall_sub_sub() {
module block_inset() { module block_inset() {
ixx = (gridx*length-0.5)/2; ixx = (gridx*length-0.5)/2;
iyy = d_height/2+d_bottom*2; iyy = d_height/1.875;
izz = sqrt(ixx^2+iyy^2)*tan(40); izz = sqrt(ixx^2+iyy^2)*tan(40);
if (enable_scoop_chamfer && enable_inset) if (enable_scoop_chamfer && enable_inset)
difference() { difference() {
intersection() { intersection() {
rotate([0,90,0]) rotate([0,90,0])
translate([-iyy+d_bottom*2,0,0]) translate([-iyy,0,0])
block_inset_sub(iyy, gridx*length, 45); block_inset_sub(iyy, gridx*length, 45);
rotate([0,90,0]) rotate([0,90,0])
translate([-iyy+d_bottom*2,0,0]) translate([-iyy,0,0])
rotate([0,90,0]) rotate([0,90,0])
block_inset_sub(ixx, d_height*2, 45); block_inset_sub(ixx, d_height*2, 45);
} }
@ -465,14 +472,14 @@ module profile_tabscoop(m) {
module block_tabscoop(a=m, b=0, c=0, d=-1) { module block_tabscoop(a=m, b=0, c=0, d=-1) {
translate([0,d_tabh*cos(a_tab)-length*gridy/2+0.25+b,0]) translate([0,d_tabh*cos(a_tab)-length*gridy/2+0.25+b,0])
difference() { difference() {
translate([0,0,-d_tabh*sin(a_tab)*2+d_height+d_bottom*2]) translate([0,0,-d_tabh*sin(a_tab)*2+d_height+2.1])
profile_tabscoop(a); profile_tabscoop(a);
translate([-gridx*length/2,-m,-m]) translate([-gridx*length/2,-m,-m])
cube([gridx*length,m-d_tabh*cos(a_tab)+0.005+c,d_height*2]); cube([gridx*length,m-d_tabh*cos(a_tab)+0.005+c,d_height*2]);
if (d >= 0) if (d >= 0)
translate([0,0,-d_tabh*sin(a_tab)+d_height+d_bottom*2+m/2+d]) translate([0,0,-d_tabh*sin(a_tab)+d_height+m/2+d+2.1])
cube([gridx*length,gridy*length,m],center=true); cube([gridx*length,gridy*length,m],center=true);
} }
} }
@ -483,7 +490,7 @@ module transform_vtab(a=0,b=1) {
} }
module transform_vtab_base(a) { module transform_vtab_base(a) {
translate([0,d_tabh*cos(a_tab)-length*gridy/2+0.25,-d_tabh*sin(a_tab)+d_height+d_bottom*2]) translate([0,d_tabh*cos(a_tab)-length*gridy/2+0.25,-d_tabh*sin(a_tab)+d_height+2.1])
rotate([90,0,270]) rotate([90,0,270])
linear_extrude(a, center=true) linear_extrude(a, center=true)
children(); children();
@ -506,7 +513,7 @@ module block_tab_base(del) {
module transform_scoop() { module transform_scoop() {
intersection() { intersection() {
block_vase(); block_vase();
translate([0,gridy*length/2-d_ramp,1.21]) translate([0,gridy*length/2-d_ramp,layer*max(bottom_layer*1)])
rotate([90,0,90]) rotate([90,0,90])
linear_extrude(2*length*gridx,center=true) linear_extrude(2*length*gridx,center=true)
children(); children();

BIN
gridfinity-spiral-vase.stl Normal file

Binary file not shown.