Initial commit

This commit is contained in:
douzeb 2023-02-09 01:34:24 +01:00
commit 26ac7a1b66
31 changed files with 6254 additions and 0 deletions

1
.gitignore vendored Normal file
View file

@ -0,0 +1 @@
*.gcode

BIN
connecteur-axe.3mf Normal file

Binary file not shown.

35
connecteur-axe.scad Normal file
View file

@ -0,0 +1,35 @@
translate([-10,-10,0])
axe();
translate([10,-10,0])
axe();
translate([-10,10,0])
axe();
translate([10,10,0])
axe();
module axe() {
difference() {
union() {
translate([0,0,22])
cylinder(h=3, r1=6, r2=5, center=true, $fn=100);
translate([0,0,20])
cylinder(h=1, r1=5, r2=6, center=true, $fn=100);
translate([0,0,11.5])
cylinder(h=23, r=5, center=true, $fn=100);
translate([0,0,1])
cylinder(h=2, r=7, center=true, $fn=100);
}
translate([0,0,53])
cylinder(h=100, r=2.5, center=true, $fn=100);
rotate([0,0,120])
translate([0,5,53])
cube([2, 10, 100], center=true);
rotate([0,0,240])
translate([0,5,53])
cube([2, 10, 100], center=true);
translate([0,5,53])
cube([2, 10, 100], center=true);
}
}

BIN
connecteur-axe.stl Normal file

Binary file not shown.

BIN
connecteur-charnière.3mf Normal file

Binary file not shown.

View file

@ -0,0 +1,36 @@
translate([-16,0,3])
charniere();
translate([16,0,3])
rotate([0, 0, 180])
charniere();
module charniere() {
difference() {
union() {
cylinder(h=6, r=10, center=true, $fn=100);
translate([16,0,0])
rotate([90, 0, 0])
cylinder(h=30, r=3, center=true, $fn=100);
translate([8.5,-2.5,0])
cube([16,25,6], center=true);
}
cylinder(h=100, r=5, center=true, $fn=100);
translate([0,15,0])
cylinder(h=100, r=5, center=true, $fn=100);
translate([0,-15,0])
cylinder(h=100, r=5, center=true, $fn=100);
translate([16,-7.5,0])
cube([9, 5.4, 100], center=true);
translate([16,2.5,0])
cube([9, 5.4, 100], center=true);
translate([16,12.5,0])
cube([9, 5.4, 100], center=true);
translate([16,0,0])
rotate([90, 0, 0])
cylinder(h=100, r=1.1, center=true, $fn=100);
}
}

Binary file not shown.

BIN
connecteur-embout.3mf Normal file

Binary file not shown.

57
connecteur-embout.scad Normal file
View file

@ -0,0 +1,57 @@
translate([11,12,3])
embout_large();
translate([-26,12,3])
embout_large();
translate([11,-12,3])
embout_large();
translate([-26,-12,3])
embout_large();
module embout_large() {
difference() {
union() {
translate([0,0,3])
cylinder(h=6, r=10, center=true, $fn=100);
translate([10,0,9])
rotate([90, 0, 90])
cylinder(h=30, r=6, center=true, $fn=100);
//cube([20,8.8,8.8], center=true);
translate([10,0,3])
cube([30,5,6], center=true);
}
translate([0,0,7.5])
cylinder(h=3.01, r1=10, r2=15, center=true, $fn=100);
cylinder(h=100, r=5, center=true, $fn=100);
translate([59.5,0,9])
rotate([90, 0, 90])
cylinder(h=100, r=3.1 , center=true, $fn=100);
translate([0,0,59])
cylinder(h=100, r=15, center=true, $fn=100);
}
}
module embout_fin() {
difference() {
union() {
translate([0,0,3])
cylinder(h=6, r=10, center=true, $fn=100);
translate([10,0,4.5])
rotate([90, 0, 90])
cylinder(h=20, r=4.5, center=true, $fn=100);
//cube([20,8.8,8.8], center=true);
}
translate([0,0,7.5])
cylinder(h=3.01, r1=10, r2=13, center=true, $fn=100);
cylinder(h=100, r=5, center=true, $fn=100);
translate([59.5,0,4.5])
rotate([90, 0, 90])
cylinder(h=100, r=2.5, center=true, $fn=100);
translate([0,0,59])
cylinder(h=100, r=13, center=true, $fn=100);
}
}

BIN
connecteur-embout.stl Normal file

Binary file not shown.

BIN
connecteur-rotule.3mf Normal file

Binary file not shown.

52
connecteur-rotule.scad Normal file
View file

@ -0,0 +1,52 @@
$tolerance=0.4/2;
$angle=40;
coupe();
rotate([0, 0, 180])
tete();
//translate([16,0,3])
//charniere();
module coupe() {
union() {
difference() {
union () {
translate([-20,0,0])
difference() {
union() {
cylinder(h=6, r=10, center=true, $fn=100);
//translate([16,0,0])
// rotate([90, 0, 0])
// cylinder(h=30, r=3, center=true, $fn=100);
translate([10,0,0])
cube([20,20,6], center=true);
}
cylinder(h=100, r=5, center=true, $fn=100);
}
sphere(r=10, $fn=100);
}
sphere(r=7+$tolerance, $fn=100);
translate([4,0,0])
rotate([0, $angle, 0])
translate([50,0,0])
cube([100,100,100], center=true);
}
}
}
module tete() {
union() {
translate([-20,0,0])
difference() {
cylinder(h=6, r=10, center=true, $fn=100);
cylinder(h=100, r=5, center=true, $fn=100);
}
sphere(r=7-$tolerance, $fn=100);
translate([-6,0,0])
rotate([0, 90, 0])
cylinder(h=10, r=3, center=true, $fn=100);
}
}

BIN
connecteur-rotule.stl Normal file

Binary file not shown.

Binary file not shown.

BIN
connecteur-tout-2x.3mf Normal file

Binary file not shown.

Binary file not shown.

BIN
connecteur-tout.3mf Normal file

Binary file not shown.

BIN
connector.stl Normal file

Binary file not shown.

BIN
wizdome_3D_infill.3mf Normal file

Binary file not shown.

BIN
wizdome_3D_no-base.3mf Normal file

Binary file not shown.

BIN
wizdome_3D_no-infill.3mf Normal file

Binary file not shown.

BIN
wizdome_3D_vase.3mf Normal file

Binary file not shown.

BIN
zome_3D.3mf Normal file

Binary file not shown.

1240
zome_3D.gltf Normal file

File diff suppressed because one or more lines are too long

1867
zome_3D.obj Normal file

File diff suppressed because it is too large Load diff

1072
zome_3D.ply Normal file

File diff suppressed because it is too large Load diff

1850
zome_3D.stl Normal file

File diff suppressed because it is too large Load diff

BIN
zome_3D_infill.3mf Normal file

Binary file not shown.

BIN
zome_3D_vase.3mf Normal file

Binary file not shown.

22
zome_measurements.csv Normal file
View file

@ -0,0 +1,22 @@
# ------------------------------
# This zome was made with https://florianwns.github.io/z5omes/
# ------------------------------
# Body Num Faces : 132
# Body Widest Ø : 6.25m
# Body Area : 103.8m²
# Base Perimeter : 0mm
# Base Ø : 0mm
# Base Area : 0mm²
# ------------------------------
Id;Width;Height;CCW Edges;CCW Angles;θ (Slope angle);σ (Dihedral angle);Area;Ø
1;41.86cm;1.91m;97.54cm;24.78° 155.22°;34.93°;162.96°;3988.04cm²;1.62m
2;80.87cm;1.78m;97.54cm;48.98° 131.02°;37.91°;170.63°;7178.42cm²;3.12m
3;1.14m;1.58m;97.54cm;71.78° 108.22°;43.65°;168.68°;9037.54cm²;4.42m
4;1.4m;1.36m;97.54cm;91.77° 88.23°;53.45°;165.13°;9510.11cm²;5.41m
5;1.56m;1.17m;97.54cm;106.41° 73.59°;69.01°;159.69°;9127.04cm²;6.04m
6;1.62m;1.09m;97.54cm;112.00° 68.00°;90.00°;154.40°;8821.85cm²;6.25m
7;1.56m;1.17m;97.54cm;106.41° 73.59°;69.01°;154.40°;9127.04cm²;6.04m
8;1.4m;1.36m;97.54cm;91.77° 88.23°;53.45°;159.69°;9510.11cm²;5.41m
9;1.14m;1.58m;97.54cm;71.78° 108.22°;43.65°;165.13°;9037.54cm²;4.42m
10;80.87cm;1.78m;97.54cm;48.98° 131.02°;37.91°;168.68°;7178.42cm²;3.12m
11;41.86cm;1.91m;97.54cm;24.78° 155.22°;34.93°;170.63°;3988.04cm²;1.62m
1 # ------------------------------
2 # This zome was made with https://florianwns.github.io/z5omes/
3 # ------------------------------
4 # Body Num Faces : 132
5 # Body Widest Ø : 6.25m
6 # Body Area : 103.8m²
7 # Base Perimeter : 0mm
8 # Base Ø : 0mm
9 # Base Area : 0mm²
10 # ------------------------------
11 Id;Width;Height;CCW Edges;CCW Angles;θ (Slope angle);σ (Dihedral angle);Area;Ø
12 1;41.86cm;1.91m;97.54cm;24.78° 155.22°;34.93°;162.96°;3988.04cm²;1.62m
13 2;80.87cm;1.78m;97.54cm;48.98° 131.02°;37.91°;170.63°;7178.42cm²;3.12m
14 3;1.14m;1.58m;97.54cm;71.78° 108.22°;43.65°;168.68°;9037.54cm²;4.42m
15 4;1.4m;1.36m;97.54cm;91.77° 88.23°;53.45°;165.13°;9510.11cm²;5.41m
16 5;1.56m;1.17m;97.54cm;106.41° 73.59°;69.01°;159.69°;9127.04cm²;6.04m
17 6;1.62m;1.09m;97.54cm;112.00° 68.00°;90.00°;154.40°;8821.85cm²;6.25m
18 7;1.56m;1.17m;97.54cm;106.41° 73.59°;69.01°;154.40°;9127.04cm²;6.04m
19 8;1.4m;1.36m;97.54cm;91.77° 88.23°;53.45°;159.69°;9510.11cm²;5.41m
20 9;1.14m;1.58m;97.54cm;71.78° 108.22°;43.65°;165.13°;9037.54cm²;4.42m
21 10;80.87cm;1.78m;97.54cm;48.98° 131.02°;37.91°;168.68°;7178.42cm²;3.12m
22 11;41.86cm;1.91m;97.54cm;24.78° 155.22°;34.93°;170.63°;3988.04cm²;1.62m

22
zome_measurements.tsv Normal file
View file

@ -0,0 +1,22 @@
# ------------------------------
# This zome was made with https://florianwns.github.io/z5omes/
# ------------------------------
# Body Num Faces : 132
# Body Widest Ø : 6.25m
# Body Area : 103.8m²
# Base Perimeter : 0mm
# Base Ø : 0mm
# Base Area : 0mm²
# ------------------------------
Id Width Height CCW Edges CCW Angles θ (Slope angle) σ (Dihedral angle) Area Ø
1 41.86cm 1.91m 97.54cm 24.78° 155.22° 34.93° 162.96° 3988.04cm² 1.62m
2 80.87cm 1.78m 97.54cm 48.98° 131.02° 37.91° 170.63° 7178.42cm² 3.12m
3 1.14m 1.58m 97.54cm 71.78° 108.22° 43.65° 168.68° 9037.54cm² 4.42m
4 1.4m 1.36m 97.54cm 91.77° 88.23° 53.45° 165.13° 9510.11cm² 5.41m
5 1.56m 1.17m 97.54cm 106.41° 73.59° 69.01° 159.69° 9127.04cm² 6.04m
6 1.62m 1.09m 97.54cm 112.00° 68.00° 90.00° 154.40° 8821.85cm² 6.25m
7 1.56m 1.17m 97.54cm 106.41° 73.59° 69.01° 154.40° 9127.04cm² 6.04m
8 1.4m 1.36m 97.54cm 91.77° 88.23° 53.45° 159.69° 9510.11cm² 5.41m
9 1.14m 1.58m 97.54cm 71.78° 108.22° 43.65° 165.13° 9037.54cm² 4.42m
10 80.87cm 1.78m 97.54cm 48.98° 131.02° 37.91° 168.68° 7178.42cm² 3.12m
11 41.86cm 1.91m 97.54cm 24.78° 155.22° 34.93° 170.63° 3988.04cm² 1.62m
Can't render this file because it has a wrong number of fields in line 11.