Arthur Moore
c34de9bff0
Switch stacking lip constants to the same format as baseplate constants
...
This increases readability and usability, while also being more compact.
Also updated documentation in gridfinity-rebuilt-bins to explain how heights are calculated.
2024-10-04 01:28:15 -04:00
Arthur Moore
dc4069b82d
Add an affine_scale command
2024-10-04 01:28:15 -04:00
Arthur Moore
a0f7ad83bd
Add an image explaining the variables for stacking lip
2024-10-04 01:28:15 -04:00
Arthur Moore
b4061d45d9
Caculate stacking lip support based on an angle
...
Removes the need for a magic constant.
2024-10-04 01:28:07 -04:00
Arthur Moore
09e8cf0de9
Merge pull request #214 from EmperorArthur/base_profile
...
Define the profile of the base by sweeping a polygon
2024-09-19 18:04:15 -04:00
Arthur Moore
d40a3decc9
Define the profile of the base by sweeping a polygon.
...
This is the same approach taken for the stacking lip and baseplate.
2024-08-29 20:14:51 -04:00
Arthur Moore
ea8a583507
Add additional validation to hole options.
2024-08-29 20:14:51 -04:00
Arthur Moore
7eb86296d9
Merge pull request #213 from EmperorArthur/fix_only_corners
...
Fix only corners
2024-08-29 19:53:27 -04:00
Arthur Moore
b8e14c1264
Fix only_corners not working correctly
2024-08-29 15:22:50 -04:00
Arthur Moore
563c94768c
Fix openscad_runner not failing when a test should have failed
2024-08-29 00:48:42 -04:00
Arthur Moore
51f1198131
Merge pull request #181 from EmperorArthur/fix_vase_mode
...
Fix spiral vase mode
2024-08-09 00:54:55 -04:00
Arthur Moore
893e4f3f01
Merge pull request #187 from EmperorArthur/simplify_baseplate
...
Fix Baseplate Not Rendering & Generate Baseplate From Profile
2024-08-09 00:48:51 -04:00
Ruud
e21bd3ba16
Merge pull request #189 from Rocka84/customizer-decimals
...
allow decimals for some values in the customizer
2024-08-08 13:27:34 +02:00
Ruud
e9743fe422
Merge pull request #196 from dfredell/patch-1
...
Pyramid example base fix
2024-08-08 13:23:11 +02:00
Arthur Moore
3f2c6e28c5
Merge pull request #179 from EmperorArthur/update_holes
...
Add Multiple Options for Hole Configuration
2024-07-23 10:58:52 -04:00
Dan Fredell
3d6d4f3725
Pyramid example base fix
...
The base for the Pyramid scheme bin example created an invalid base because it wasn't a whole number.
2024-06-19 21:31:44 -05:00
Arthur Moore
3f10786861
Baseplate: Fix "Fit To Drawer" functionality.
...
No tests added yet.
2024-06-15 15:00:59 -04:00
Rocka84
f583a1c26d
added note about special comments for customizer
2024-05-27 22:54:35 +02:00
Rocka84
9008d3bf9c
allow decimals for some values in the customizer
2024-05-19 00:42:23 +02:00
Arthur Moore
8bfd05be8e
Generate Baseplate from profile isntead of as a negative
...
Previous implementation was off by 0.5mm,
and required creating a gridfinity base.
This is much more flexible, and easier to understand.
2024-05-17 09:38:54 -04:00
Arthur Moore
54f0f4f935
Simplify rounded_square and make defaults match square
...
The default for square is center=false.
2024-05-17 09:38:47 -04:00
Arthur Moore
5a43731728
Make block_inset look similar to the previous version
2024-05-06 23:09:57 -04:00
Arthur Moore
7aebad420c
Re-worked generic-helpers.rounded_square
...
* Now behaves more like rounded_rectangle, but creates 2d or 3d items.
* Deprecated rounded_rectangle.
* Added significant input checks to ensure values are valid.
2024-05-02 09:21:28 -04:00
Arthur Moore
388cb8dbab
Fix baseplate not rendering
...
Simplified profile_skeleton() by using `offset` instead of `minovsky`.
This is much less computationally expensive, and easier to understand.
2024-05-02 09:21:28 -04:00
Arthur Moore
43b0b350a4
Use OpenSCAD Circle resolution to speed up ribbed cylinder creation
2024-05-02 09:20:22 -04:00
Arthur Moore
2245dd097c
Fix gridfinity-rebuilt-lite
...
It now also supports all the hole options.
Note: Tests are not performed, due to the high rendering time.
2024-04-30 23:35:43 -04:00
Arthur Moore
e34a25d640
Baseplate - Add support for crush ribs and chamfering the magnet holes
...
* Updated tests
2024-04-30 08:11:29 -04:00
Arthur Moore
6f4e3b590e
Add tests baseplate hole options
2024-04-30 07:54:52 -04:00
Arthur Moore
a4807fd3ab
OpenScad Python Runner - Make camera_args a variable
...
As opposed to being a parameter of `create_image`.
Also made CameraArguments support fluent.
2024-04-30 07:43:09 -04:00
Arthur Moore
cd56b0e421
Make sure hole naming is consistent
...
Also fixes tests.
2024-04-30 07:38:47 -04:00
Arthur Moore
95219c6cb9
Fix Baseplate
...
Hole changes were not tested against it.
Many oppertunities for improvements here.
2024-04-30 01:46:37 -04:00
Arthur Moore
8346ce4dd3
Tweak chamfered magnet_hole to so the cone works witrh supportless
...
Difference was small enough the slicer mostly ignored it.
2024-04-30 01:08:05 -04:00
Arthur Moore
787fa30950
Split screw_hole into a separate function.
...
This can be re-used for the baseplate.
2024-04-30 01:06:40 -04:00
Arthur Moore
0e7c298154
Add tests for magenet holes in spiral-vase mode
2024-04-29 23:20:15 -04:00
Arthur Moore
01d759f406
Fix spiral vase bases
...
* Updated constant names to match previous changes.
2024-04-29 22:54:25 -04:00
Arthur Moore
35ee2065db
Fix spiral vase mode
...
* Fixed assertion relating to walls.
* Switched to profile_wall instead of profile_wall_sub.
* Adjusted block_pinch offset so the stacking lip is properly printed.
2024-04-29 22:48:08 -04:00
Arthur Moore
bdc5a7e4d7
Added and update Images of all hole types
...
May want to consider auto-generating these
as part of the documentation build.
2024-04-28 02:05:50 -04:00
Arthur Moore
9b89773812
Add a test suite to generate images of bins with holes
...
Used to ensure all hole options work.
2024-04-28 02:05:50 -04:00
Arthur Moore
447df8621b
Tweak defaults for Base Hole Options
2024-04-28 01:56:13 -04:00
Arthur Moore
73b10760f8
Update tests / helpers to allow adding more tests
2024-04-28 01:55:42 -04:00
Arthur Moore
0649f10802
Add Python tests for the hole cutouts to generate images.
...
* These are not (yet) triggered/run by the CI/CD system.
2024-04-27 00:31:19 -04:00
Arthur Moore
ca28aed898
Allow multiple levels for supportless holes
...
Helps prevent / minimize issues with filament droop.
Expecially when Cura decides to start the top of hole in mid-air.
Visible Changes:
* Supportless screw holes have a 3rd layer.
* Supportless magnet holes without screw holes have a 3rd layer.
Backend Changes:
* Switched to a completely different generation strategy.
* Previous strategy directly produced negative.
* New strategy is to make a positive,
then use that to create a negative.
* Algorithm for multiple layers is not perfect,
but works within tollerances set.
2024-04-27 00:18:18 -04:00
Arthur Moore
1a50807295
Make Screw Holes Printable
2024-04-24 21:22:56 -04:00
Arthur Moore
3e94c65cf2
Add images of all the hole options.
...
Does not include all combinations.
2024-04-24 21:19:16 -04:00
Arthur Moore
c47661af7f
Add A 2nd Level For Supportless Hole Generation
...
Makes holes print better.
Use Affine Translation Matrices to be clear
how everything works without being too verbose.
2024-04-24 21:19:10 -04:00
Arthur Moore
32f91a77ca
Support Chamfering Magnet Holes
...
Similar to ljbeal's Pull Request.
However, the implementation is completely different.
https://github.com/kennetek/gridfinity-rebuilt-openscad/pull/144
2024-04-21 23:34:23 -04:00
Arthur Moore
f222c262fc
Allow using crush ribs for the magnet hole
2024-04-21 23:28:49 -04:00
Arthur Moore
8fa885ac72
Allow mixing and matching hole options
2024-04-21 23:21:21 -04:00
Arthur Moore
2e0e9bd363
Simplify Hole Creation
...
Everything now goes through block_base_hole(...)
Noting in gridfinity-rebuilt-utility knows or cares what sytle_hole contains.
2024-04-21 23:07:21 -04:00
Arthur Moore
a4200a04bd
Simplify refined_hole()
2024-04-21 23:07:08 -04:00
